summaryrefslogtreecommitdiff
path: root/src/content_mapblock.cpp
Commit message (Collapse)AuthorAge
* Cleanup in content_mapblock (#5746)numberZero2017-05-20
| | | NDT_LIQUID is being drawn by MapBlockMesh since a long time ago...
* Optimize updateFastFaceRow processing by removing some TileSpec copy (#5678)Loïc Blot2017-04-29
| | | | | | | | | | | | | | | * Optimize updateFastFaceRow processing by removing some TileSpec copy It permit to decrease this function from 54% runtime to 45% and reduce copy from 14% runtime to 12.5% getTileInfo also reduced from 27% to 23% * makeFastFace should use a const ref too this trigger a const pointer need in the underlying function Also fix some code style and prevent calculating 4 times the same position at a point * Reduce a comparison cost for lights in updateFastFaceRow
* Fix after soft node overlaysDániel Juhász2017-04-21
| | | This removes a segmentation fault and makes node meshes well colorized.
* Soft node overlay (#5186)Dániel Juhász2017-04-21
| | | | This commit adds node overlays, which are tiles that are drawn on top of other tiles.
* Signlike, glasslike drawtypes: Fix inverted texturesnumber Zero2017-04-01
|
* Paramtype2: Add missing type CPT2_GLASSLIKE_LIQUID_LEVELparamat2017-03-30
| | | | | | | Add the missing paramtype2 for param2 controlling the liquid level inside the glasslike_framed drawtype. Add missing documentation of the feature to lua_api.txt. Update and improve comments for drawtype enumerations in nodedef.h.
* Add CPP11 header to define nullptr & constexpr (#5471)Loïc Blot2017-03-29
| | | This header permit to use nullptr & constexpr keywords in portable code segments and benefit from nullptr & constexpr when using C++11 and greater
* Content_mapblock.cpp: Refactornumber Zero2017-03-20
|
* Plantlike: Fix visual_scale being applied squaredparamat2017-02-10
| | | | | | | | | | | | | | | | | | This re-applies 2 commits that were reverted. Visual_scale was applied twice to plantlike by accident sometime between 2011 and 2013, squaring the requested scale value. Visual_scale is correctly applied once in it's other uses in signlike and torchlike. Two lines of code are removed, they also had no effect for the vast majority of nodes with the default visual_scale of 1.0. The texture continues to have it's base at ground level. Send sqrt(visual_scale) to old clients. Keep compatibility with protocol < 30 clients now that visual_scale is no longer applied twice to plantlike drawtype and mods are being updated to a new value.
* Revert "Plantlike: Fix visual_scale being applied squared (#5115)"Craig Robbins2017-02-10
| | | | This reverts commit 953cbb3b15997a0e7c7c32af2365cb5046a9e476.
* Plantlike: Fix visual_scale being applied squared (#5115)Paramat2017-01-28
| | | | | | | | | Visual_scale was applied twice to plantlike by accident sometime between 2011 and 2013, squaring the requested scale value. Visual_scale is correctly applied once in it's other uses in signlike and torchlike. Two lines of code are removed, they also had no effect for the vast majority of nodes with the default visual_scale of 1.0. The texture continues to have it's base at ground level.
* Add smooth lighting for all nodesnumber Zero2017-01-24
| | | | Note: Smooth lighting disables the mesh cache.
* Add hardware node coloring. Includes:Dániel Juhász2017-01-23
| | | | | | - Increase ContentFeatures serialization version - Color property and palettes for nodes - paramtype2 = "color", "colored facedir" or "colored wallmounted"
* Environment & IGameDef code refactoring (#4985)Ner'zhul2017-01-09
| | | | | | | | | | | | | | | | | | | | | * Environment code refactoring * Cleanup includes & class declarations in client & server environment to improve build speed * ServerEnvironment::m_gamedef is now a pointer to Server instead of IGameDef, permitting to cleanup many casts. * Cleanup IGameDef * Move ITextureSource* IGameDef::getTextureSource() to Client only. * Also move ITextureSource *IGameDef::tsrc() helper * drop getShaderSource, getSceneManager, getSoundManager & getCamera abstract call * drop unused emerge() call * cleanup server unused functions (mentionned before) * Drop one unused parameter from ContentFeatures::updateTextures * move checkLocalPrivilege to Client * Remove some unnecessary casts * create_formspec_menu: remove IWritableTextureSource pointer, as client already knows it * Fix some comments * Change required IGameDef to Server/Client pointers * Previous change that game.cpp sometimes calls functions with Client + InventoryManager + IGameDef in same functions but it's the same objects * Remove duplicate Client pointer in GUIFormSpecMenu::GUIFormSpecMenu * drop ClientMap::sectorWasDrawn which is unused
* Mapblock_mesh_generate_special: Improve performanceparamat2016-10-04
| | | | | | Remove uses of std::map. Make sure we use ContentFeatures reference not value. Original commit by gregorycu.
* Plantlike meshoptions: fix degrotate. (#4512)Auke Kok2016-09-12
| | | | This snuck in with the meshoptions patch and accidentally kills degrotate plants. Thanks to @hybriddog for finding this.
* Make plantlike drawtype more funAuke Kok2016-08-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds several new ways that the plantlike drawtype mesh can be changed. This requires paramtype2 = "meshoptions" to be set in the node definition. The drawtype for these nodes should be "plantlike". These modifications are all done using param2. This field is now a complex bitfield that allows some or more of the combinations to be chosen, and the mesh draw code will choose the options based as neeeded for each plantlike node. bit layout: bits 0, 1 and 2 (values 0x1 through 0x7) are for choosing the plant mesh shape: 0 - ordinary plantlike plant ("x" shaped) 1 - ordinary plant, but rotated 45 degrees ("+" shaped) 2 - a plant with 3 faces ("*" shaped) 3 - a plant with 4 faces ("#" shaped) 4 - a plant with 4 faces ("#" shaped, leaning outwards) 5 through 7 are unused and reserved for future mesh shapes. bit 3 (0x8) causes the plant to be randomly offset in the x,z plane. The plant should fall within the 1x1x1 nodebox if regularly sized. bit 4 (0x10) causes the plant mesh to grow by sqrt(2), and will cause the plant mesh to fill out 1x1x1, and appear slightly larger. Texture makers will want to make their plant texture 23x16 pixels to have the best visual fit in 1x1x1 size. bit 5 (0x20) causes each face of the plant to have a slight negative Y offset in position, descending up to 0.125 downwards into the node below. Because this is per face, this causes the plant model to be less symmetric. bit 6 (0x40) through bit 7 (0x80) are unused and reserved for future use. !(https://youtu.be/qWuI664krsI)
* Allow nodes to specify which sides to connect to.Auke Kok2016-03-12
| | | | | | | | | | | | | | | | NDT_CONNECTED attempts to connect to any side of nodes that it can connect to, which is troublesome for FACEDIR type nodes that generally may only have one usable face, and can be rotated. We introduce a node parameter `connect_sides` that is valid for any node type. If specified, it lists faces of the node (in "top", "bottom", "front", "left", "back", "right", form, as array) that connecting nodeboxes can connect to. "front" corresponds to the south facing side of a node with facedir = 0. If the node is rotatable using *simple* FACEDIR, then the attached face is properly rotated before checking. This allows e.g. a chest to be attached to only from the rear side.
* Nodebox: Allow nodeboxes to "connect"Auke Kok2016-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We introduce a new nodebox type "connected", and allow these nodes to have optional nodeboxes that connect it to other connecting nodeboxes. This is all done at scenedraw time in the client. The client will inspect the surrounding nodes and if they are to be connected to, it will draw the appropriate connecting nodeboxes to make those connections. In the node_box definition, we have to specify separate nodeboxes for each valid connection. This allows us to make nodes that connect only horizontally (the common case) by providing optional nodeboxes for +x, -x, +z, -z directions. Or this allows us to make wires that can connect up and down, by providing nodeboxes that connect it up and down (+y, -y) as well. The optional nodeboxes can be arrays. They are named "connect_top, "connect_bottom", "connect_front", "connect_left", "connect_back" and "connect_right". Here, "front" means the south facing side of the node that has facedir = 0. Additionally, a "fixed" nodebox list present will always be drawn, so one can make a central post, for instance. This "fixed" nodebox can be omitted, or it can be an array of nodeboxes. Collision boxes are also updated in exactly the same fashion, which allows you to walk over the upper extremities of the individual node boxes, or stand really close to them. You can also walk up node noxes that are small in height, all as expected, and unlike the NDT_FENCELIKE nodes. I've posted a screenshot demonstrating the flexibility at http://i.imgur.com/zaJq8jo.png In the screenshot, all connecting nodes are of this new subtype. Transparent textures render incorrectly, Which I don't think is related to this text, as other nodeboxes also have issues with this. A protocol bump is performed in order to be able to send older clients a nodeblock that is usable for them. In order to avoid abuse of users we send older clients a "full-size" node, so that it's impossible for them to try and walk through a fence or wall that's created in this fashion. This was tested with a pre-bump client connected against a server running the new protocol. These nodes connect to other nodes, and you can select which ones those are by specifying node names (or group names) in the connects_to string array: connects_to = { "group:fence", "default:wood" } By default, nodes do not connect to anything, allowing you to create nodes that always have to be paired in order to connect. lua_api.txt is updated to reflect the extension to the node_box API. Example lua code needed to generate these nodes can be found here: https://gist.github.com/sofar/b381c8c192c8e53e6062
* Remove new_style_waterRealBadAngel2016-02-26
|
* Cleanup selection mesh code, add shaders for halo and selection boxesRealBadAngel2016-02-08
|
* Add new ContentParamType2 "CPT2_DEGROTATE"est312015-10-04
| | | | | | | | | This might break some mods, but it is important for all uses of the param2 to be documented. This doesn't need a serialisation version or network protocol version change, as old clients will still work on new servers, and it is bearable to have new clients getting non rotated plants on old servers.
* Firelike drawtype: Improve codeparamat2015-09-14
| | | | | | Remove unusable fine rotation by param2 Remove unused and redundant code Fix code style issues
* Change i++ to ++iDavid Jones2015-08-25
|
* Move globals from main.cpp to more sane locationsCraig Robbins2015-04-01
| | | | | | | | | | | | Move debug streams to log.cpp|h Move GUI-related globals to clientlauncher Move g_settings and g_settings_path to settings.cpp|h Move g_menuclouds to clouds.cpp|h Move g_profiler to profiler.cpp|h
* Move texture_min_size even further down the pipe. Now, textures are ↵Aaron Suen2015-03-31
| | | | JIT-upscaled using an image transformation, right at the time they're added to a mesh or particle; images used in 2D elements are left unscaled. This should fix any remaining issues with HUD elements.
* Connect rails with connect_to_raillike and shorten the codesSmallJoker2015-03-21
|
* For usages of assert() that are meant to persist in Release builds (when ↵Craig Robbins2015-03-07
| | | | NDEBUG is defined), replace those usages with persistent alternatives
* Improve group-based connection between raillike nodesBlockMen2015-03-05
|
* Replace std::list to std::vector into tile.cpp (m_texture_trash) and move ↵Loic Blot2015-03-05
| | | | tile.hpp to src/client/
* Fix some rendering glitchesBlockMen2015-03-05
| | | | | - Fixes particle draworder - Fixes nodehighlighting
* Fix NDT_GLASSLIKE normalsKahrl2015-01-31
| | | | Remove inventorycube() workaround for default:glass in minimal game
* Fix visual_scale for plantlike nodes (again)Vanessa Ezekowitz2014-12-19
| | | | | | fixes #1989 move the plant to the bottom of its node properly, without affecting its scale. See isue #1989
* Fix visual_scale for NDT_PLANTLIKE being set too smallCraig Robbins2014-12-18
|
* Fix raillike bug (currently manifests itself on Android), and minor ↵Kodexky2014-11-20
| | | | | | improvement to readability. NB: Minor edits to patch made by Zeno- (int to short and minor formatting)
* Fix wallmounted mesh rotationsShadowNinja2014-11-19
|
* Add option to enable mesh caching, add wallmounted for meshes.RealBadAngel2014-10-29
|
* Fix broken plantlike drawtype.RealBadAngel2014-10-22
|
* Recalculate normals for cached meshes.RealBadAngel2014-10-21
| | | | | | Check if mesh is here before adding to meshcollector. Fix deleting the meshes.
* Various uninitialised variable fixesCraig Robbins2014-10-19
| | | | | | sky.cpp: m_bgcolor.getAlpha() was being used before initialised mesh related: m_highlight_mesh_color was being used uninitialised
* Add meshnode drawtype.RealBadAngel2014-10-18
|
* Add optional framed glasslike drawtypeBlockMen2014-10-02
|
* Add firelike drawtypeTriBlade92014-09-21
|
* Split settings into seperate source and header filesShadowNinja2014-09-21
| | | | This also cleans up settings a bit
* Bugfix: don't highlight air nodes.RealBadAngel2014-09-18
|
* Node highlighting.RealBadAngel2014-09-17
|
* Pass light sources in blue channel of vertex color instead of decoded light ↵RealBadAngel2014-08-21
| | | | | | for all special drawtypes. Plus some style fixes and optimizations.
* Dont display interior of glasslike_framed node when its not defined.RealBadAngel2014-07-24
| | | | Fixes https://github.com/minetest/minetest/issues/1514
* Allow full circle rotation with 2degs step for plantlike drawtype.RealBadAngel2014-07-24
|
* Add rotation for plantlike drawtype.RealBadAngel2014-07-22
|