Minetest Lua Modding API Reference 0.4.16 ========================================= * More information at * Developer Wiki: Introduction ------------ Content and functionality can be added to Minetest 0.4 by using Lua scripting in run-time loaded mods. A mod is a self-contained bunch of scripts, textures and other related things that is loaded by and interfaces with Minetest. Mods are contained and ran solely on the server side. Definitions and media files are automatically transferred to the client. If you see a deficiency in the API, feel free to attempt to add the functionality in the engine and API. You can send such improvements as source code patches to . Programming in Lua ------------------ If you have any difficulty in understanding this, please read [Programming in Lua](http://www.lua.org/pil/). Startup ------- Mods are loaded during server startup from the mod load paths by running the `init.lua` scripts in a shared environment. Paths ----- * `RUN_IN_PLACE=1` (Windows release, local build) * `$path_user`: * Linux: `` * Windows: `` * `$path_share` * Linux: `` * Windows: `` * `RUN_IN_PLACE=0`: (Linux release) * `$path_share` * Linux: `/usr/share/minetest` * Windows: `/minetest-0.4.x` * `$path_user`: * Linux: `$HOME/.minetest` * Windows: `C:/users//AppData/minetest` (maybe) Games ----- Games are looked up from: * `$path_share/games/gameid/` * `$path_user/games/gameid/` where `gameid` is unique to each game. The game directory contains the file `game.conf`, which contains these fields: name = e.g. name = Minetest The game directory can contain the file minetest.conf, which will be used to set default settings when running the particular game. It can also contain a settingtypes.txt in the same format as the one in builtin. This settingtypes.txt will be parsed by the menu and the settings will be displayed in the "Games" category in the settings tab. ### Menu images Games can provide custom main menu images. They are put inside a `menu` directory inside the game directory. The images are named `$identifier.png`, where `$identifier` is one of `overlay,background,footer,header`. If you want to specify multiple images for one identifier, add additional images named like `$identifier.$n.png`, with an ascending number $n starting with 1, and a random image will be chosen from the provided ones. Mod load path ------------- Generic: * `$path_share/games/gameid/mods/` * `$path_share/mods/` * `$path_user/games/gameid/mods/` * `$path_user/mods/` (User-installed mods) * `$worldpath/worldmods/` In a run-in-place version (e.g. the distributed windows version): * `minetest-0.4.x/games/gameid/mods/` * `minetest-0.4.x/mods/` (User-installed mods) * `minetest-0.4.x/worlds/worldname/worldmods/` On an installed version on Linux: * `/usr/share/minetest/games/gameid/mods/` * `$HOME/.minetest/mods/` (User-installed mods) * `$HOME/.minetest/worlds/worldname/worldmods` Mod load path for world-specific games -------------------------------------- It is possible to include a game in a world; in this case, no mods or games are loaded or checked from anywhere else. This is useful for e.g. adventure worlds. This happens if the following directory exists: $world/game/ Mods should be then be placed in: $world/game/mods/ Modpack support ---------------- Mods can be put in a subdirectory, if the parent directory, which otherwise should be a mod, contains a file named `modpack.txt`. This file shall be empty, except for lines starting with `#`, which are comments. Mod directory structure ------------------------ mods |-- modname | |-- depends.txt | |-- screenshot.png | |-- description.txt | |-- settingtypes.txt | |-- init.lua | |-- models | |-- textures | | |-- modname_stuff.png | | `-- modname_something_else.png | |-- sounds | |-- media | `-- `-- another ### modname The location of this directory can be fetched by using `minetest.get_modpath(modname)`. ### `depends.txt` List of mods that have to be loaded before loading this mod. A single line contains a single modname. Optional dependencies can be defined by appending a question mark to a single modname. Their meaning is that if the specified mod is missing, that does not prevent this mod from being loaded. ### `screenshot.png` A screenshot shown in the mod manager within the main menu. It should have an aspect ratio of 3:2 and a minimum size of 300×200 pixels. ### `description.txt` A File containing description to be shown within mainmenu. ### `settingtypes.txt` A file in the same format as the one in builtin. It will be parsed by the settings menu and the settings will be displayed in the "Mods" category. ### `init.lua` The main Lua script. Running this script should register everything it wants to register. Subsequent execution depends on minetest calling the registered callbacks. `minetest.settings` can be used to read custom or existing settings at load time, if necessary. (See `Settings`) ### `models` Models for entities or meshnodes. ### `textures`, `sounds`, `media` Media files (textures, sounds, whatever) that will be transferred to the client and will be available for use by the mod. Naming convention for registered textual names ---------------------------------------------- Registered names should generally be in this format: `modname:` `` can have these characters: a-zA-Z0-9_ This is to prevent conflicting names from corrupting maps and is enforced by the mod loader. ### Example In the mod `experimental`, there is the ideal item/node/entity name `tnt`. So the name should be `experimental:tnt`. Enforcement can be overridden by prefixing the name with `:`. This can be used for overriding the registrations of some other mod. Example: Any mod can redefine `experimental:tnt` by using the name :experimental:tnt when registering it. (also that mod is required to have `experimental` as a dependency) The `:` prefix can also be used for maintaining backwards compatibility. ### Aliases Aliases can be added by using `minetest.register_alias(name, convert_to)` or `minetest.register_alias_force(name, convert_to)`. This will make Minetest to convert things called name to things called `convert_to`. The only difference between `minetest.register_alias` and `minetest.register_alias_force` is that if an item called `name` exists, `minetest.register_alias` will do nothing while `minetest.register_alias_force` will unregister it. This can be used for maintaining backwards compatibility. This can be also used for setting quick access names for things, e.g. if you have an item called `epiclylongmodname:stuff`, you could do minetest.register_alias("stuff", "epiclylongmodname:stuff") and be able to use `/giveme stuff`. Textures -------- Mods should generally prefix their textures with `modname_`, e.g. given the mod name `foomod`, a texture could be called: foomod_foothing.png Textures are referred to by their complete name, or alternatively by stripping out the file extension: * e.g. `foomod_foothing.png` * e.g. `foomod_foothing` Texture modifiers ----------------- There are various texture modifiers that can be used to generate textures on-the-fly. ### Texture overlaying Textures can be overlaid by putting a `^` between them. Example: default_dirt.png^default_grass_side.png `default_grass_side.png` is overlayed over `default_dirt.png`. The texture with the lower resolution will be automatically upscaled to the higher resolution texture. ### Texture grouping Textures can be grouped together by enclosing them in `(` and `)`. Example: `cobble.png^(thing1.png^thing2.png)` A texture for `thing1.png^thing2.png` is created and the resulting texture is overlaid on top of `cobble.png`. ### Escaping Modifiers that accept texture names (e.g. `[combine`) accept escaping to allow passing complex texture names as arguments. Escaping is done with backslash and is required for `^` and `:`. Example: `cobble.png^[lowpart:50:color.png\^[mask\:trans.png` The lower 50 percent of `color.png^[mask:trans.png` are overlaid on top of `cobble.png`. ### Advanced texture modifiers #### `[crack::

` * `` = animation frame count * `

` = current animation frame Draw a step of the crack animation on the texture. Example: default_cobble.png^[crack:10:1 #### `[combine:x:,=:,=:...` * `` = width * `` = height * `` = x position * `` = y position * `` = texture to combine Creates a texture of size `` times `` and blits the listed files to their specified coordinates. Example: [combine:16x32:0,0=default_cobble.png:0,16=default_wood.png #### `[resize:x` Resizes the texture to the given dimensions. Example: default_sandstone.png^[resize:16x16 #### `[opacity:` Makes the base image transparent according to the given ratio. `r` must be between 0 and 255. 0 means totally transparent. 255 means totally opaque. Example: default_sandstone.png^[opacity:127 #### `[invert:` Inverts the given channels of the base image. Mode may contain the characters "r", "g", "b", "a". Only the channels that are mentioned in the mode string will be inverted. Example: default_apple.png^[invert:rgb #### `[brighten` Brightens the texture. Example: tnt_tnt_side.png^[brighten #### `[noalpha` Makes the texture completely opaque. Example: default_leaves.png^[noalpha #### `[makealpha:,,` Convert one color to transparency. Example: default_cobble.png^[makealpha:128,128,128 #### `[transform` * `` = transformation(s) to apply Rotates and/or flips the image. `` can be a number (between 0 and 7) or a transform name. Rotations are counter-clockwise. 0 I identity 1 R90 rotate by 90 degrees 2 R180 rotate by 180 degrees 3 R270 rotate by 270 degrees 4 FX flip X 5 FXR90 flip X then rotate by 90 degrees 6 FY flip Y 7 FYR90 flip Y then rotate by 90 degrees Example: default_stone.png^[transformFXR90 #### `[inventorycube{{{` Escaping does not apply here and `^` is replaced by `&` in texture names instead. Create an inventory cube texture using the side textures. Example: [inventorycube{grass.png{dirt.png&grass_side.png{dirt.png&grass_side.png Creates an inventorycube with `grass.png`, `dirt.png^grass_side.png` and `dirt.png^grass_side.png` textures #### `[lowpart::` Blit the lower ``% part of `` on the texture. Example: base.png^[lowpart:25:overlay.png #### `[verticalframe::` * `` = animation frame count * `` = current animation frame Crops the texture to a frame of a vertical animation. Example: default_torch_animated.png^[verticalframe:16:8 #### `[mask:` Apply a mask to the base image. The mask is applied using binary AND. #### `[sheet:x:,` Retrieves a tile at position x,y from the base image which it assumes to be a tilesheet with dimensions w,h. #### `[colorize::` Colorize the textures with the given color. `` is specified as a `ColorString`. `` is an int ranging from 0 to 255 or the word "`alpha`". If it is an int, then it specifies how far to interpolate between the colors where 0 is only the texture color and 255 is only ``. If omitted, the alpha of `` will be used as the ratio. If it is the word "`alpha`", then each texture pixel will contain the RGB of `` and the alpha of `` multiplied by the alpha of the texture pixel. #### `[multiply:` Multiplies texture colors with the given color. `` is specified as a `ColorString`. Result is more like what you'd expect if you put a color on top of another color. Meaning white surfaces get a lot of your new color while black parts don't change very much. Hardware coloring ----------------- The goal of hardware coloring is to simplify the creation of colorful nodes. If your textures use the same pattern, and they only differ in their color (like colored wool blocks), you can use hardware coloring instead of creating and managing many texture files. All of these methods use color multiplication (so a white-black texture with red coloring will result in red-black color). ### Static coloring This method is useful if you wish to create nodes/items with the same texture, in different colors, each in a new node/item definition. #### Global color When you register an item or node, set its `color` field (which accepts a `ColorSpec`) to the desired color. An `ItemStack`s static color can be overwritten by the `color` metadata field. If you set that field to a `ColorString`, that color will be used. #### Tile color Each tile may have an individual static color, which overwrites every other coloring methods. To disable the coloring of a face, set its color to white (because multiplying with white does nothing). You can set the `color` property of the tiles in the node's definition if the tile is in table format. ### Palettes For nodes and items which can have many colors, a palette is more suitable. A palette is a texture, which can contain up to 256 pixels. Each pixel is one possible color for the node/item. You can register one node/item, which can have up to 256 colors. #### Palette indexing When using palettes, you always provide a pixel index for the given node or `ItemStack`. The palette is read from left to right and from top to bottom. If the palette has less than 256 pixels, then it is stretched to contain exactly 256 pixels (after arranging the pixels to one line). The indexing starts from 0. Examples: * 16x16 palette, index = 0: the top left corner * 16x16 palette, index = 4: the fifth pixel in the first row * 16x16 palette, index = 16: the pixel below the top left corner * 16x16 palette, index = 255: the bottom right corner * 2 (width)x4 (height) palette, index=31: the top left corner. The palette has 8 pixels, so each pixel is stretched to 32 pixels, to ensure the total 256 pixels. * 2x4 palette, index=32: the top right corner * 2x4 palette, index=63: the top right corner * 2x4 palette, index=64: the pixel below the top left corner #### Using palettes with items When registering an item, set the item definition's `palette` field to a texture. You can also use texture modifiers. The `ItemStack`'s color depends on the `palette_index` field of the stack's metadata. `palette_index` is an integer, which specifies the index of the pixel to use. #### Linking palettes with nodes When registering a node, set the item definition's `palette` field to a texture. You can also use texture modifiers. The node's color depends on its `param2`, so you also must set an appropriate `drawtype`: * `drawtype = "color"` for nodes which use their full `param2` for palette indexing. These nodes can have 256 different colors. The palette should contain 256 pixels. * `drawtype = "colorwallmounted"` for nodes which use the first five bits (most significant) of `param2` for palette indexing. The remaining three bits are describing rotation, as in `wallmounted` draw type. Division by 8 yields the palette index (without stretching the palette). These nodes can have 32 different colors, and the palette should contain 32 pixels. Examples: * `param2 = 17` is 2 * 8 + 1, so the rotation is 1 and the third (= 2 + 1) pixel will be picked from the palette. * `param2 = 35` is 4 * 8 + 3, so the rotation is 3 and the fifth (= 4 + 1) pixel will be picked from the palette. * `drawtype = "colorfacedir"` for nodes which use the first three bits of `param2` for palette indexing. The remaining five bits are describing rotation, as in `facedir` draw type. Division by 32 yields the palette index (without stretching the palette). These nodes can have 8 different colors, and the palette should contain 8 pixels. Examples: * `param2 = 17` is 0 * 32 + 17, so the rotation is 17 and the first (= 0 + 1) pixel will be picked from the palette. * `param2 = 35` is 1 * 32 + 3, so the rotation is 3 and the second (= 1 + 1) pixel will be picked from the palette. To colorize a node on the map, set its `param2` value (according to the node's draw type). ### Conversion between nodes in the inventory and the on the map Static coloring is the same for both cases, there is no need for conversion. If the `ItemStack`'s metadata contains the `color` field, it will be lost on placement, because nodes on the map can only use palettes. If the `ItemStack`'s metadata contains the `palette_index` field, it is automatically transferred between node and item forms by the engine, when a player digs or places a colored node. You can disable this feature by setting the `drop` field of the node to itself (without metadata). To transfer the color to a special drop, you need a drop table. Example: minetest.register_node("mod:stone", { description = "Stone", tiles = {"default_stone.png"}, paramtype2 = "color", palette = "palette.png", drop = { items = { -- assume that mod:cobblestone also has the same palette {items = {"mod:cobblestone"}, inherit_color = true }, } } }) ### Colored items in craft recipes Craft recipes only support item strings, but fortunately item strings can also contain metadata. Example craft recipe registration: local stack = ItemStack("wool:block") dyed:get_meta():set_int("palette_index", 3) -- add index minetest.register_craft({ output = dyed:to_string(), -- convert to string type = "shapeless", recipe = { "wool:block", "dye:red", }, }) Metadata field filtering in the `recipe` field are not supported yet, so the craft output is independent of the color of the ingredients. Soft texture overlay -------------------- Sometimes hardware coloring is not enough, because it affects the whole tile. Soft texture overlays were added to Minetest to allow the dynamic coloring of only specific parts of the node's texture. For example a grass block may have colored grass, while keeping the dirt brown. These overlays are 'soft', because unlike texture modifiers, the layers are not merged in the memory, but they are simply drawn on top of each other. This allows different hardware coloring, but also means that tiles with overlays are drawn slower. Using too much overlays might cause FPS loss. To define an overlay, simply set the `overlay_tiles` field of the node definition. These tiles are defined in the same way as plain tiles: they can have a texture name, color etc. To skip one face, set that overlay tile to an empty string. Example (colored grass block): minetest.register_node("default:dirt_with_grass", { description = "Dirt with Grass", -- Regular tiles, as usual -- The dirt tile disables palette coloring tiles = {{name = "default_grass.png"}, {name = "default_dirt.png", color = "white"}}, -- Overlay tiles: define them in the same style -- The top and bottom tile does not have overlay overlay_tiles = {"", "", {name = "default_grass_side.png", tileable_vertical = false}}, -- Global color, used in inventory color = "green", -- Palette in the world paramtype2 = "color", palette = "default_foilage.png", }) Sounds ------ Only Ogg Vorbis files are supported. For positional playing of sounds, only single-channel (mono) files are supported. Otherwise OpenAL will play them non-positionally. Mods should generally prefix their sounds with `modname_`, e.g. given the mod name "`foomod`", a sound could be called: foomod_foosound.ogg Sounds are referred to by their name with a dot, a single digit and the file extension stripped out. When a sound is played, the actual sound file is chosen randomly from the matching sounds. When playing the sound `foomod_foosound`, the sound is chosen randomly from the available ones of the following files: * `foomod_foosound.ogg` * `foomod_foosound.0.ogg` * `foomod_foosound.1.ogg` * (...) * `foomod_foosound.9.ogg` Examples of sound parameter tables: -- Play locationless on all clients { gain = 1.0, -- default fade = 0.0, -- default, change to a value > 0 to fade the sound in } -- Play locationless to one player { to_player = name, gain = 1.0, -- default fade = 0.0, -- default, change to a value > 0 to fade the sound in } -- Play locationless to one player, looped { to_player = name, gain = 1.0, -- default loop = true, } -- Play in a location { pos = {x = 1, y = 2, z = 3}, gain = 1.0, -- default max_hear_distance = 32, -- default, uses an euclidean metric } -- Play connected to an object, looped { object = , gain = 1.0, -- default max_hear_distance = 32, -- default, uses an euclidean metric loop = true, } Looped sounds must either be connected to an object or played locationless to one player using `to_player = name,` ### `SimpleSoundSpec` * e.g. `""` * e.g. `"default_place_node"` * e.g. `{}` * e.g. `{name = "default_place_node"}` * e.g. `{name = "default_place_node", gain = 1.0}` Registered definitions of stuff ------------------------------- Anything added using certain `minetest.register_*` functions get added to the global `minetest.registered_*` tables. * `minetest.register_entity(name, prototype table)` * added to `minetest.registered_entities[name]` * `minetest.register_node(name, node definition)` * added to `minetest.registered_items[name]` * added to `minetest.registered_nodes[name]` * `minetest.register_tool(name, item definition)` * added to `minetest.registered_items[name]` * `minetest.register_craftitem(name, item definition)` * added to `minetest.registered_items[name]` * `minetest.unregister_item(name)` * Unregisters the item name from engine, and deletes the entry with key * `name` from `minetest.registered_items` and from the associated item * table according to its nature: `minetest.registered_nodes[]` etc * `minetest.register_biome(biome definition)` * returns an integer uniquely identifying the registered biome * added to `minetest.registered_biome` with the key of `biome.name` * if `biome.name` is nil, the key is the returned ID * `minetest.register_ore(ore definition)` * returns an integer uniquely identifying the registered ore * added to `minetest.registered_ores` with the key of `ore.name` * if `ore.name` is nil, the key is the returned ID * `minetest.register_decoration(decoration definition)` * returns an integer uniquely identifying the registered decoration * added to `minetest.registered_decorations` with the key of `decoration.name` * if `decoration.name` is nil, the key is the returned ID * `minetest.register_schematic(schematic definition)` * returns an integer uniquely identifying the registered schematic * added to `minetest.registered_schematic` with the key of `schematic.name` * if `schematic.name` is nil, the key is the returned ID * if the schematic is loaded from a file, schematic.name is set to the filename * if the function is called when loading the mod, and schematic.name is a relative path, then the current mod path will be prepended to the schematic filename * `minetest.clear_registered_biomes()` * clears all biomes currently registered * `minetest.clear_registered_ores()` * clears all ores currently registered * `minetest.clear_registered_decorations()` * clears all decorations currently registered * `minetest.clear_registered_schematics()` * clears all schematics currently registered Note that in some cases you will stumble upon things that are not contained in these tables (e.g. when a mod has been removed). Always check for existence before trying to access the fields. Example: If you want to check the drawtype of a node, you could do: local function get_nodedef_field(nodename, fieldname) if not minetest.registered_nodes[nodename] then return nil end return minetest.registered_nodes[nodename][fieldname] end local drawtype = get_nodedef_field(nodename, "drawtype") Example: `minetest.get_item_group(name, group)` has been implemented as: function minetest.get_item_group(name, group) if not minetest.registered_items[name] or not minetest.registered_items[name].groups[group] then return 0 end return minetest.registered_items[name].groups[group] end Nodes ----- Nodes are the bulk data of the world: cubes and other things that take the space of a cube. Huge amounts of them are handled efficiently, but they are quite static. The definition of a node is stored and can be accessed by name in minetest.registered_nodes[node.name] See "Registered definitions of stuff". Nodes are passed by value between Lua and the engine. They are represented by a table: {name="name", param1=num, param2=num} `param1` and `param2` are 8-bit integers ranging from 0 to 255. The engine uses them for certain automated functions. If you don't use these functions, you can use them to store arbitrary values. The functions of `param1` and `param2` are determined by certain fields in the node definition: `param1` is reserved for the engine when `paramtype != "none"`: paramtype = "light" ^ The value stores light with and without sun in its upper and lower 4 bits respectively. Allows light to propagate from or through the node with light value falling by 1 per node. This is essential for a light source node to spread its light. `param2` is reserved for the engine when any of these are used: liquidtype == "flowing" ^ The level and some flags of the liquid is stored in param2 drawtype == "flowingliquid" ^ The drawn liquid level is read from param2 drawtype == "torchlike" drawtype == "signlike" paramtype2 == "wallmounted" ^ The rotation of the node is stored in param2. You can make this value by using minetest.dir_to_wallmounted(). paramtype2 == "facedir" ^ The rotation of the node is stored in param2. Furnaces and chests are rotated this way. Can be made by using minetest.dir_to_facedir(). Values range 0 - 23 facedir / 4 = axis direction: 0 = y+ 1 = z+ 2 = z- 3 = x+ 4 = x- 5 = y- facedir modulo 4 = rotation around that axis paramtype2 == "leveled" ^ Only valid for "nodebox" with type = "leveled". The level of the top face of the nodebox is stored in param2. The other faces are defined by 'fixed = {}' like 'type = "fixed"' nodeboxes. The nodebox height is param2 / 64 nodes. The maximum accepted value of param2 is 127. paramtype2 == "degrotate" ^ The rotation of this node is stored in param2. Plants are rotated this way. Values range 0 - 179. The value stored in param2 is multiplied by two to get the actual rotation of the node. paramtype2 == "meshoptions" ^ Only valid for "plantlike". The value of param2 becomes a bitfield which can be used to change how the client draws plantlike nodes. Bits 0, 1 and 2 form a mesh selector. Currently the following meshes are choosable: 0 = a "x" shaped plant (ordinary plant) 1 = a "+" shaped plant (just rotated 45 degrees) 2 = a "*" shaped plant with 3 faces instead of 2 3 = a "#" shaped plant with 4 faces instead of 2 4 = a "#" shaped plant with 4 faces that lean outwards 5-7 are unused and reserved for future meshes. Bits 3 through 7 are optional flags that can be combined and give these effects: bit 3 (0x08) - Makes the plant slightly vary placement horizontally bit 4 (0x10) - Makes the plant mesh 1.4x larger bit 5 (0x20) - Moves each face randomly a small bit down (1/8 max) bits 6-7 are reserved for future use. paramtype2 == "color" ^ `param2` tells which color is picked from the palette. The palette should have 256 pixels. paramtype2 == "colorfacedir" ^ Same as `facedir`, but with colors. The first three bits of `param2` tells which color is picked from the palette. The palette should have 8 pixels. paramtype2 == "colorwallmounted" ^ Same as `wallmounted`, but with colors. The first five bits of `param2` tells which color is picked from the palette. The palette should have 32 pixels. paramtype2 == "glasslikeliquidlevel" ^ Only valid for "glasslike_framed" or "glasslike_framed_optional" drawtypes. param2 defines 64 levels of internal liquid. Liquid texture is defined using `special_tiles = {"modname_tilename.png"},` Nodes can also contain extra data. See "Node Metadata". Node drawtypes --------------- There are a bunch of different looking node types. Look for examples in `games/minimal` or `games/minetest_game`. * `normal` * `airlike` * `liquid` * `flowingliquid` * `glasslike` * `glasslike_framed` * `glasslike_framed_optional` * `allfaces` * `allfaces_optional` * `torchlike` * `signlike` * `plantlike` * `firelike` * `fencelike` * `raillike` * `nodebox` -- See below. (**Experimental!**) * `mesh` -- use models for nodes `*_optional` drawtypes need less rendering time if deactivated (always client side). Node boxes ----------- Node selection boxes are defined using "node boxes" The `nodebox` node drawtype allows defining visual of nodes consisting of arbitrary number of boxes. It allows defining stuff like stairs. Only the `fixed` and `leveled` box type is supported for these. Please note that this is still experimental, and may be incompatibly changed in the future. A nodebox is defined as any of: { -- A normal cube; the default in most things type = "regular" } { -- A fixed box (facedir param2 is used, if applicable) type = "fixed", fixed = box OR {box1, box2, ...} } { -- A box like the selection box for torches -- (wallmounted param2 is used, if applicable) type = "wallmounted", wall_top = box, wall_bottom = box, wall_side = box } { -- A node that has optional boxes depending on neighbouring nodes' -- presence and type. See also `connects_to`. type = "connected", fixed = box OR {box1, box2, ...} connect_top = box OR {box1, box2, ...} connect_bottom = box OR {box1, box2, ...} connect_front = box OR {box1, box2, ...} connect_left = box OR {box1, box2, ...} connect_back = box OR {box1, box2, ...} connect_right = box OR {box1, box2, ...} } A `box` is defined as: {x1, y1, z1, x2, y2, z2} A box of a regular node would look like: {-0.5, -0.5, -0.5, 0.5, 0.5, 0.5}, `type = "leveled"` is same as `type = "fixed"`, but `y2` will be automatically set to level from `param2`. Meshes ------ If drawtype `mesh` is used, tiles should hold model materials textures. Only static meshes are implemented. For supported model formats see Irrlicht engine documentation. Noise Parameters ---------------- Noise Parameters, or commonly called "`NoiseParams`", define the properties of perlin noise. ### `offset` Offset that the noise is translated by (i.e. added) after calculation. ### `scale` Factor that the noise is scaled by (i.e. multiplied) after calculation. ### `spread` Vector containing values by which each coordinate is divided by before calculation. Higher spread values result in larger noise features. A value of `{x=250, y=250, z=250}` is common. ### `seed` Random seed for the noise. Add the world seed to a seed offset for world-unique noise. In the case of `minetest.get_perlin()`, this value has the world seed automatically added. ### `octaves` Number of times the noise gradient is accumulated into the noise. Increase this number to increase the amount of detail in the resulting noise. A value of `6` is common. ### `persistence` Factor by which the effect of the noise gradient function changes with each successive octave. Values less than `1` make the details of successive octaves' noise diminish, while values greater than `1` make successive octaves stronger. A value of `0.6` is common. ### `lacunarity` Factor by which the noise feature sizes change with each successive octave. A value of `2.0` is common. ### `flags` Leave this field unset for no special handling. Currently supported are `defaults`, `eased` and `absvalue`. #### `defaults` Specify this if you would like to keep auto-selection of eased/not-eased while specifying some other flags. #### `eased` Maps noise gradient values onto a quintic S-curve before performing interpolation. This results in smooth, rolling noise. Disable this (`noeased`) for sharp-looking noise. If no flags are specified (or defaults is), 2D noise is eased and 3D noise is not eased. #### `absvalue` Accumulates the absolute value of each noise gradient result. Noise parameters format example for 2D or 3D perlin noise or perlin noise maps: np_terrain = { offset = 0, scale = 1, spread = {x=500, y=500, z=500}, seed = 571347, octaves = 5, persist = 0.63, lacunarity = 2.0, flags = "defaults, absvalue" } ^ A single noise parameter table can be used to get 2D or 3D noise, when getting 2D noise spread.z is ignored. Ore types --------- These tell in what manner the ore is generated. All default ores are of the uniformly-distributed scatter type. ### `scatter` Randomly chooses a location and generates a cluster of ore. If `noise_params` is specified, the ore will be placed if the 3D perlin noise at that point is greater than the `noise_threshold`, giving the ability to create a non-equal distribution of ore. ### `sheet` Creates a sheet of ore in a blob shape according to the 2D perlin noise described by `noise_params` and `noise_threshold`. This is essentially an improved version of the so-called "stratus" ore seen in some unofficial mods. This sheet consists of vertical columns of uniform randomly distributed height, varying between the inclusive range `column_height_min` and `column_height_max`. If `column_height_min` is not specified, this parameter defaults to 1. If `column_height_max` is not specified, this parameter defaults to `clust_size` for reverse compatibility. New code should prefer `column_height_max`. The `column_midpoint_factor` parameter controls the position of the column at which ore eminates from. If 1, columns grow upward. If 0, columns grow downward. If 0.5, columns grow equally starting from each direction. `column_midpoint_factor` is a decimal number ranging in value from 0 to 1. If this parameter is not specified, the default is 0.5. The ore parameters `clust_scarcity` and `clust_num_ores` are ignored for this ore type. ### `puff` Creates a sheet of ore in a cloud-like puff shape. As with the `sheet` ore type, the size and shape of puffs are described by `noise_params` and `noise_threshold` and are placed at random vertical positions within the currently generated chunk. The vertical top and bottom displacement of each puff are determined by the noise parameters `np_puff_top` and `np_puff_bottom`, respectively. ### `blob` Creates a deformed sphere of ore according to 3d perlin noise described by `noise_params`. The maximum size of the blob is `clust_size`, and `clust_scarcity` has the same meaning as with the `scatter` type. ### `vein` Creates veins of ore varying in density by according to the intersection of two instances of 3d perlin noise with diffferent seeds, both described by `noise_params`. `random_factor` varies the influence random chance has on placement of an ore inside the vein, which is `1` by default. Note that modifying this parameter may require adjusting `noise_threshold`. The parameters `clust_scarcity`, `clust_num_ores`, and `clust_size` are ignored by this ore type. This ore type is difficult to control since it is sensitive to small changes. The following is a decent set of parameters to work from: noise_params = { offset = 0, scale = 3, spread = {x=200, y=200, z=200}, seed = 5390, octaves = 4, persist = 0.5, flags = "eased", }, noise_threshold = 1.6 **WARNING**: Use this ore type *very* sparingly since it is ~200x more computationally expensive than any other ore. Ore attributes -------------- See section "Flag Specifier Format". Currently supported flags: `absheight`, `puff_cliffs`, `puff_additive_composition`. ### `absheight` Also produce this same ore between the height range of `-y_max` and `-y_min`. Useful for having ore in sky realms without having to duplicate ore entries. ### `puff_cliffs` If set, puff ore generation will not taper down large differences in displacement when approaching the edge of a puff. This flag has no effect for ore types other than `puff`. ### `puff_additive_composition` By default, when noise described by `np_puff_top` or `np_puff_bottom` results in a negative displacement, the sub-column at that point is not generated. With this attribute set, puff ore generation will instead generate the absolute difference in noise displacement values. This flag has no effect for ore types other than `puff`. Decoration types ---------------- The varying types of decorations that can be placed. ### `simple` Creates a 1 times `H` times 1 column of a specified node (or a random node from a list, if a decoration list is specified). Can specify a certain node it must spawn next to, such as water or lava, for example. Can also generate a decoration of random height between a specified lower and upper bound. This type of decoration is intended for placement of grass, flowers, cacti, papyri, waterlilies and so on. ### `schematic` Copies a box of `MapNodes` from a specified schematic file (or raw description). Can specify a probability of a node randomly appearing when placed. This decoration type is intended to be used for multi-node sized discrete structures, such as trees, cave spikes, rocks, and so on. Schematic specifier -------------------- A schematic specifier identifies a schematic by either a filename to a Minetest Schematic file (`.mts`) or through raw data supplied through Lua, in the form of a table. This table specifies the following fields: * The `size` field is a 3D vector containing the dimensions of the provided schematic. (required) * The `yslice_prob` field is a table of {ypos, prob} which sets the `ypos`th vertical slice of the schematic to have a `prob / 256 * 100` chance of occuring. (default: 255) * The `data` field is a flat table of MapNode tables making up the schematic, in the order of `[z [y [x]]]`. (required) Each MapNode table contains: * `name`: the name of the map node to place (required) * `prob` (alias `param1`): the probability of this node being placed (default: 255) * `param2`: the raw param2 value of the node being placed onto the map (default: 0) * `force_place`: boolean representing if the node should forcibly overwrite any previous contents (default: false) About probability values: * A probability value of `0` or `1` means that node will never appear (0% chance). * A probability value of `254` or `255` means the node will always appear (100% chance). * If the probability value `p` is greater than `1`, then there is a `(p / 256 * 100)` percent chance that node will appear when the schematic is placed on the map. Schematic attributes -------------------- See section "Flag Specifier Format". Currently supported flags: `place_center_x`, `place_center_y`, `place_center_z`, `force_placement`. * `place_center_x`: Placement of this decoration is centered along the X axis. * `place_center_y`: Placement of this decoration is centered along the Y axis. * `place_center_z`: Placement of this decoration is centered along the Z axis. * `force_placement`: Schematic nodes other than "ignore" will replace existing nodes. HUD element types ----------------- The position field is used for all element types. To account for differing resolutions, the position coordinates are the percentage of the screen, ranging in value from `0` to `1`. The name field is not yet used, but should contain a description of what the HUD element represents. The direction field is the direction in which something is drawn. `0` draws from left to right, `1` draws from right to left, `2` draws from top to bottom, and `3` draws from bottom to top. The `alignment` field specifies how the item will be aligned. It ranges from `-1` to `1`, with `0` being the center, `-1` is moved to the left/up, and `1` is to the right/down. Fractional values can be used. The `offset` field specifies a pixel offset from the position. Contrary to position, the offset is not scaled to screen size. This allows for some precisely-positioned items in the HUD. **Note**: `offset` _will_ adapt to screen DPI as well as user defined scaling factor! Below are the specific uses for fields in each type; fields not listed for that type are ignored. **Note**: Future revisions to the HUD API may be incompatible; the HUD API is still in the experimental stages. ### `image` Displays an image on the HUD. * `scale`: The scale of the image, with 1 being the original texture size. Only the X coordinate scale is used (positive values). Negative values represent that percentage of the screen it should take; e.g. `x=-100` means 100% (width). * `text`: The name of the texture that is displayed. * `alignment`: The alignment of the image. * `offset`: offset in pixels from position. ### `text` Displays text on the HUD. * `scale`: Defines the bounding rectangle of the text. A value such as `{x=100, y=100}` should work. * `text`: The text to be displayed in the HUD element. * `number`: An integer containing the RGB value of the color used to draw the text. Specify `0xFFFFFF` for white text, `0xFF0000` for red, and so on. * `alignment`: The alignment of the text. * `offset`: offset in pixels from position. ### `statbar` Displays a horizontal bar made up of half-images. * `text`: The name of the texture that is used. * `number`: The number of half-textures that are displayed. If odd, will end with a vertically center-split texture. * `direction` * `offset`: offset in pixels from position. * `size`: If used, will force full-image size to this value (override texture pack image size) ### `inventory` * `text`: The name of the inventory list to be displayed. * `number`: Number of items in the inventory to be displayed. * `item`: Position of item that is selected. * `direction` * `offset`: offset in pixels from position. ### `waypoint` Displays distance to selected world position. * `name`: The name of the waypoint. * `text`: Distance suffix. Can be blank. * `number:` An integer containing the RGB value of the color used to draw the text. * `world_pos`: World position of the waypoint. Representations of simple things -------------------------------- ### Position/vector {x=num, y=num, z=num} For helper functions see "Vector helpers". ### `pointed_thing` * `{type="nothing"}` * `{type="node", under=pos, above=pos}` * `{type="object", ref=ObjectRef}` Flag Specifier Format --------------------- Flags using the standardized flag specifier format can be specified in either of two ways, by string or table. The string format is a comma-delimited set of flag names; whitespace and unrecognized flag fields are ignored. Specifying a flag in the string sets the flag, and specifying a flag prefixed by the string `"no"` explicitly clears the flag from whatever the default may be. In addition to the standard string flag format, the schematic flags field can also be a table of flag names to boolean values representing whether or not the flag is set. Additionally, if a field with the flag name prefixed with `"no"` is present, mapped to a boolean of any value, the specified flag is unset. E.g. A flag field of value {place_center_x = true, place_center_y=false, place_center_z=true} is equivalent to {place_center_x = true, noplace_center_y=true, place_center_z=true} which is equivalent to "place_center_x, noplace_center_y, place_center_z" or even "place_center_x, place_center_z" since, by default, no schematic attributes are set. Items ----- ### Item types There are three kinds of items: nodes, tools and craftitems. * Node (`register_node`): A node from the world. * Tool (`register_tool`): A tool/weapon that can dig and damage things according to `tool_capabilities`. * Craftitem (`register_craftitem`): A miscellaneous item. ### Amount and wear All item stacks have an amount between 0 to 65535. It is 1 by default. Tool item stacks can not have an amount greater than 1. Tools use a wear (=damage) value ranging from 0 to 65535. The value 0 is the default and used is for unworn tools. The values 1 to 65535 are used for worn tools, where a higher value stands for a higher wear. Non-tools always have a wear value of 0. ### Item formats Items and item stacks can exist in three formats: Serializes, table format and `ItemStack`. #### Serialized This is called "stackstring" or "itemstring". It is a simple string with 1-3 components: the full item identifier, an optional amount and an optional wear value. Syntax: [[ ]] Examples: * `'default:apple'`: 1 apple * `'default:dirt 5'`: 5 dirt * `'default:pick_stone'`: a new stone pickaxe * `'default:pick_wood 1 21323'`: a wooden pickaxe, ca. 1/3 worn out #### Table format Examples: 5 dirt nodes: {name="default:dirt", count=5, wear=0, metadata=""} A wooden pick about 1/3 worn out: {name="default:pick_wood", count=1, wear=21323, metadata=""} An apple: {name="default:apple", count=1, wear=0, metadata=""} #### `ItemStack` A native C++ format with many helper methods. Useful for converting between formats. See the Class reference section for details. When an item must be passed to a function, it can usually be in any of these formats. Groups ------ In a number of places, there is a group table. Groups define the properties of a thing (item, node, armor of entity, capabilities of tool) in such a way that the engine and other mods can can interact with the thing without actually knowing what the thing is. ### Usage Groups are stored in a table, having the group names with keys and the group ratings as values. For example: groups = {crumbly=3, soil=1} -- ^ Default dirt groups = {crumbly=2, soil=1, level=2, outerspace=1} -- ^ A more special dirt-kind of thing Groups always have a rating associated with them. If there is no useful meaning for a rating for an enabled group, it shall be `1`. When not defined, the rating of a group defaults to `0`. Thus when you read groups, you must interpret `nil` and `0` as the same value, `0`. You can read the rating of a group for an item or a node by using minetest.get_item_group(itemname, groupname) ### Groups of items Groups of items can define what kind of an item it is (e.g. wool). ### Groups of nodes In addition to the general item things, groups are used to define whether a node is destroyable and how long it takes to destroy by a tool. ### Groups of entities For entities, groups are, as of now, used only for calculating damage. The rating is the percentage of damage caused by tools with this damage group. See "Entity damage mechanism". object.get_armor_groups() --> a group-rating table (e.g. {fleshy=100}) object.set_armor_groups({fleshy=30, cracky=80}) ### Groups of tools Groups in tools define which groups of nodes and entities they are effective towards. ### Groups in crafting recipes An example: Make meat soup from any meat, any water and any bowl: { output = 'food:meat_soup_raw', recipe = { {'group:meat'}, {'group:water'}, {'group:bowl'}, }, -- preserve = {'group:bowl'}, -- Not implemented yet (TODO) } Another example: Make red wool from white wool and red dye: { type = 'shapeless', output = 'wool:red', recipe = {'wool:white', 'group:dye,basecolor_red'}, } ### Special groups * `immortal`: Disables the group damage system for an entity * `punch_operable`: For entities; disables the regular damage mechanism for players punching it by hand or a non-tool item, so that it can do something else than take damage. * `level`: Can be used to give an additional sense of progression in the game. * A larger level will cause e.g. a weapon of a lower level make much less damage, and get worn out much faster, or not be able to get drops from destroyed nodes. * `0` is something that is directly accessible at the start of gameplay * There is no upper limit * `dig_immediate`: (player can always pick up node without reducing tool wear) * `2`: the node always gets the digging time 0.5 seconds (rail, sign) * `3`: the node always gets the digging time 0 seconds (torch) * `disable_jump`: Player (and possibly other things) cannot jump from node * `fall_damage_add_percent`: damage speed = `speed * (1 + value/100)` * `bouncy`: value is bounce speed in percent * `falling_node`: if there is no walkable block under the node it will fall * `attached_node`: if the node under it is not a walkable block the node will be dropped as an item. If the node is wallmounted the wallmounted direction is checked. * `soil`: saplings will grow on nodes in this group * `connect_to_raillike`: makes nodes of raillike drawtype with same group value connect to each other ### Known damage and digging time defining groups * `crumbly`: dirt, sand * `cracky`: tough but crackable stuff like stone. * `snappy`: something that can be cut using fine tools; e.g. leaves, small plants, wire, sheets of metal * `choppy`: something that can be cut using force; e.g. trees, wooden planks * `fleshy`: Living things like animals and the player. This could imply some blood effects when hitting. * `explody`: Especially prone to explosions * `oddly_breakable_by_hand`: Can be added to nodes that shouldn't logically be breakable by the hand but are. Somewhat similar to `dig_immediate`, but times are more like `{[1]=3.50,[2]=2.00,[3]=0.70}` and this does not override the speed of a tool if the tool can dig at a faster speed than this suggests for the hand. ### Examples of custom groups Item groups are often used for defining, well, _groups of items_. * `meat`: any meat-kind of a thing (rating might define the size or healing ability or be irrelevant -- it is not defined as of yet) * `eatable`: anything that can be eaten. Rating might define HP gain in half hearts. * `flammable`: can be set on fire. Rating might define the intensity of the fire, affecting e.g. the speed of the spreading of an open fire. * `wool`: any wool (any origin, any color) * `metal`: any metal * `weapon`: any weapon * `heavy`: anything considerably heavy ### Digging time calculation specifics Groups such as `crumbly`, `cracky` and `snappy` are used for this purpose. Rating is `1`, `2` or `3`. A higher rating for such a group implies faster digging time. The `level` group is used to limit the toughness of nodes a tool can dig and to scale the digging times / damage to a greater extent. **Please do understand this**, otherwise you cannot use the system to it's full potential. Tools define their properties by a list of parameters for groups. They cannot dig other groups; thus it is important to use a standard bunch of groups to enable interaction with tools. #### Tools definition Tools define: * Full punch interval * Maximum drop level * For an arbitrary list of groups: * Uses (until the tool breaks) * Maximum level (usually `0`, `1`, `2` or `3`) * Digging times * Damage groups #### Full punch interval When used as a weapon, the tool will do full damage if this time is spent between punches. If e.g. half the time is spent, the tool will do half damage. #### Maximum drop level Suggests the maximum level of node, when dug with the tool, that will drop it's useful item. (e.g. iron ore to drop a lump of iron). This is not automated; it is the responsibility of the node definition to implement this. #### Uses Determines how many uses the tool has when it is used for digging a node, of this group, of the maximum level. For lower leveled nodes, the use count is multiplied by `3^leveldiff`. * `uses=10, leveldiff=0`: actual uses: 10 * `uses=10, leveldiff=1`: actual uses: 30 * `uses=10, leveldiff=2`: actual uses: 90 #### Maximum level Tells what is the maximum level of a node of this group that the tool will be able to dig. #### Digging times List of digging times for different ratings of the group, for nodes of the maximum level. For example, as a Lua table, `times={2=2.00, 3=0.70}`. This would result in the tool to be able to dig nodes that have a rating of `2` or `3` for this group, and unable to dig the rating `1`, which is the toughest. Unless there is a matching group that enables digging otherwise. If the result digging time is 0, a delay of 0.15 seconds is added between digging nodes; If the player releases LMB after digging, this delay is set to 0, i.e. players can more quickly click the nodes away instead of holding LMB. #### Damage groups List of damage for groups of entities. See "Entity damage mechanism". #### Example definition of the capabilities of a tool tool_capabilities = { full_punch_interval=1.5, max_drop_level=1, groupcaps={ crumbly={maxlevel=2, uses=20, times={[1]=1.60, [2]=1.20, [3]=0.80}} } damage_groups = {fleshy=2}, } This makes the tool be able to dig nodes that fulfil both of these: * Have the `crumbly` group * Have a `level` group less or equal to `2` Table of resulting digging times: crumbly 0 1 2 3 4 <- level -> 0 - - - - - 1 0.80 1.60 1.60 - - 2 0.60 1.20 1.20 - - 3 0.40 0.80 0.80 - - level diff: 2 1 0 -1 -2 Table of resulting tool uses: -> 0 - - - - - 1 180 60 20 - - 2 180 60 20 - - 3 180 60 20 - - **Notes**: * At `crumbly==0`, the node is not diggable. * At `crumbly==3`, the level difference digging time divider kicks in and makes easy nodes to be quickly breakable. * At `level > 2`, the node is not diggable, because it's `level > maxlevel` Entity damage mechanism ----------------------- Damage calculation: damage = 0 foreach group in cap.damage_groups: damage += cap.damage_groups[group] * limit(actual_interval / cap.full_punch_interval, 0.0, 1.0) * (object.armor_groups[group] / 100.0) -- Where object.armor_groups[group] is 0 for inexistent values return damage Client predicts damage based on damage groups. Because of this, it is able to give an immediate response when an entity is damaged or dies; the response is pre-defined somehow (e.g. by defining a sprite animation) (not implemented; TODO). Currently a smoke puff will appear when an entity dies. The group `immortal` completely disables normal damage. Entities can define a special armor group, which is `punch_operable`. This group disables the regular damage mechanism for players punching it by hand or a non-tool item, so that it can do something else than take damage. On the Lua side, every punch calls: entity:on_punch(puncher, time_from_last_punch, tool_capabilities, direction, damage) This should never be called directly, because damage is usually not handled by the entity itself. * `puncher` is the object performing the punch. Can be `nil`. Should never be accessed unless absolutely required, to encourage interoperability. * `time_from_last_punch` is time from last punch (by `puncher`) or `nil`. * `tool_capabilities` can be `nil`. * `direction` is a unit vector, pointing from the source of the punch to the punched object. * `damage` damage that will be done to entity Return value of this function will determin if damage is done by this function (retval true) or shall be done by engine (retval false) To punch an entity/object in Lua, call: object:punch(puncher, time_from_last_punch, tool_capabilities, direction) * Return value is tool wear. * Parameters are equal to the above callback. * If `direction` equals `nil` and `puncher` does not equal `nil`, `direction` will be automatically filled in based on the location of `puncher`. Node Metadata ------------- The instance of a node in the world normally only contains the three values mentioned in "Nodes". However, it is possible to insert extra data into a node. It is called "node metadata"; See `NodeMetaRef`. Node metadata contains two things: * A key-value store * An inventory Some of the values in the key-value store are handled specially: * `formspec`: Defines a right-click inventory menu. See "Formspec". * `infotext`: Text shown on the screen when the node is pointed at Example stuff: local meta = minetest.get_meta(pos) meta:set_string("formspec", "size[8,9]".. "list[context;main;0,0;8,4;]".. "list[current_player;main;0,5;8,4;]") meta:set_string("infotext", "Chest"); local inv = meta:get_inventory() inv:set_size("main", 8*4) print(dump(meta:to_table())) meta:from_table({ inventory = { main = {[1] = "default:dirt", [2] = "", [3] = "", [4] = "", [5] = "", [6] = "", [7] = "", [8] = "", [9] = "", [10] = "", [11] = "", [12] = "", [13] = "", [14] = "default:cobble", [15] = "", [16] = "", [17] = "", [18] = "", [19] = "", [20] = "default:cobble", [21] = "", [22] = "", [23] = "", [24] = "", [25] = "", [26] = "", [27] = "", [28] = "", [29] = "", [30] = "", [31] = "", [32] = ""} }, fields = { formspec = "size[8,9]list[context;main;0,0;8,4;]list[current_player;main;0,5;8,4;]", infotext = "Chest" } }) Item Metadata ------------- Item stacks can store metadata too. See `ItemStackMetaRef`. Item metadata only contains a key-value store. Some of the values in the key-value store are handled specially: * `description`: Set the item stack's description. Defaults to `idef.description` * `color`: A `ColorString`, which sets the stack's color. * `palette_index`: If the item has a palette, this is used to get the current color from the palette. Example stuff: local meta = stack:get_meta() meta:set_string("key", "value") print(dump(meta:to_table())) Formspec -------- Formspec defines a menu. Currently not much else than inventories are supported. It is a string, with a somewhat strange format. Spaces and newlines can be inserted between the blocks, as is used in the examples. ### Examples #### Chest size[8,9] list[context;main;0,0;8,4;] list[current_player;main;0,5;8,4;] #### Furnace size[8,9] list[context;fuel;2,3;1,1;] list[context;src;2,1;1,1;] list[context;dst;5,1;2,2;] list[current_player;main;0,5;8,4;] #### Minecraft-like player inventory size[8,7.5] image[1,0.6;1,2;player.png] list[current_player;main;0,3.5;8,4;] list[current_player;craft;3,0;3,3;] list[current_player;craftpreview;7,1;1,1;] ### Elements #### `size[,,]` * Define the size of the menu in inventory slots * `fixed_size`: `true`/`false` (optional) * deprecated: `invsize[,;]` #### `position[,]` * Define the position of the formspec * A value between 0.0 and 1.0 represents a position inside the screen * The default value is the center of the screen (0.5, 0.5) #### `anchor[,]` * Define the anchor of the formspec * A value between 0.0 and 1.0 represents an anchor inside the formspec * The default value is the center of the formspec (0.5, 0.5) #### `container[,]` * Start of a container block, moves all physical elements in the container by (X, Y) * Must have matching `container_end` * Containers can be nested, in which case the offsets are added (child containers are relative to parent containers) #### `container_end[]` * End of a container, following elements are no longer relative to this container #### `list[;;,;,;]` * Show an inventory list #### `list[;;,;,;]` * Show an inventory list #### `listring[;]` * Allows to create a ring of inventory lists * Shift-clicking on items in one element of the ring will send them to the next inventory list inside the ring * The first occurrence of an element inside the ring will determine the inventory where items will be sent to #### `listring[]` * Shorthand for doing `listring[;]` for the last two inventory lists added by list[...] #### `listcolors[;]` * Sets background color of slots as `ColorString` * Sets background color of slots on mouse hovering #### `listcolors[;;]` * Sets background color of slots as `ColorString` * Sets background color of slots on mouse hovering * Sets color of slots border #### `listcolors[;;;;]` * Sets background color of slots as `ColorString` * Sets background color of slots on mouse hovering * Sets color of slots border * Sets default background color of tooltips * Sets default font color of tooltips #### `tooltip[;;;]` * Adds tooltip for an element * `` tooltip background color as `ColorString` (optional) * `` tooltip font color as `ColorString` (optional) #### `image[,;,;]` * Show an image * Position and size units are inventory slots #### `item_image[,;,;]` * Show an inventory image of registered item/node * Position and size units are inventory slots #### `bgcolor[;]` * Sets background color of formspec as `ColorString` * If `true`, the background color is drawn fullscreen (does not effect the size of the formspec) #### `background[,;,;]` * Use a background. Inventory rectangles are not drawn then. * Position and size units are inventory slots * Example for formspec 8x4 in 16x resolution: image shall be sized 8 times 16px times 4 times 16px. #### `background[,;,;;]` * Use a background. Inventory rectangles are not drawn then. * Position and size units are inventory slots * Example for formspec 8x4 in 16x resolution: image shall be sized 8 times 16px times 4 times 16px * If `true` the background is clipped to formspec size (`x` and `y` are used as offset values, `w` and `h` are ignored) #### `pwdfield[,;,;;