summaryrefslogtreecommitdiff
path: root/src/jthread/jmutexautolock.h
blob: 6020a5c336d62c5e4b318cfda05cf2c6cf0b676a (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
/*

    This file is a part of the JThread package, which contains some object-
    oriented thread wrappers for different thread implementations.

    Copyright (c) 2000-2006  Jori Liesenborgs (jori.liesenborgs@gmail.com)

    Permission is hereby granted, free of charge, to any person obtaining a
    copy of this software and associated documentation files (the "Software"),
    to deal in the Software without restriction, including without limitation
    the rights to use, copy, modify, merge, publish, distribute, sublicense,
    and/or sell copies of the Software, and to permit persons to whom the
    Software is furnished to do so, subject to the following conditions:

    The above copyright notice and this permission notice shall be included in
    all copies or substantial portions of the Software.

    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
    THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
    LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
    FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
    DEALINGS IN THE SOFTWARE.

*/

#ifndef JMUTEXAUTOLOCK_H

#define JMUTEXAUTOLOCK_H

#include "jmutex.h"

class JMutexAutoLock
{
public:
	JMutexAutoLock(JMutex &m) : mutex(m)						{ mutex.Lock(); }
	~JMutexAutoLock()								{ mutex.Unlock(); }
private:
	JMutex &mutex;
};

#endif // JMUTEXAUTOLOCK_H
2 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026
#LyX 2.2 created this file. For more info see http://www.lyx.org/
\lyxformat 508
\begin_document
\begin_header
\save_transient_properties true
\origin unavailable
\textclass paper
\use_default_options true
\maintain_unincluded_children false
\language english
\language_package default
\inputencoding auto
\fontencoding global
\font_roman "default" "default"
\font_sans "default" "default"
\font_typewriter "default" "default"
\font_math "auto" "auto"
\font_default_family default
\use_non_tex_fonts false
\font_sc false
\font_osf false
\font_sf_scale 100 100
\font_tt_scale 100 100
\graphics default
\default_output_format default
\output_sync 0
\bibtex_command default
\index_command default
\paperfontsize default
\spacing single
\use_hyperref false
\papersize default
\use_geometry true
\use_package amsmath 1
\use_package amssymb 1
\use_package cancel 1
\use_package esint 1
\use_package mathdots 1
\use_package mathtools 1
\use_package mhchem 1
\use_package stackrel 1
\use_package stmaryrd 1
\use_package undertilde 1
\cite_engine basic
\cite_engine_type default
\biblio_style plain
\use_bibtopic false
\use_indices false
\paperorientation portrait
\suppress_date false
\justification true
\use_refstyle 1
\index Index
\shortcut idx
\color #008000
\end_index
\leftmargin 1cm
\topmargin 1cm
\rightmargin 1cm
\bottommargin 1cm
\secnumdepth 3
\tocdepth 3
\paragraph_separation indent
\paragraph_indentation 0bp
\quotes_language english
\papercolumns 1
\papersides 1
\paperpagestyle default
\tracking_changes false
\output_changes false
\html_math_output 0
\html_css_as_file 0
\html_be_strict false
\end_header

\begin_body

\begin_layout Title
Minetest Mod - Advanced Trains [advtrains]
\end_layout

\begin_layout Title
Interlocking System Guide
\end_layout

\begin_layout Section
Introduction
\end_layout

\begin_layout Standard
In real-world railways, a so-called interlocking system is a set of railway
 signals and trackside equipment.
 Its purpose is to prevent conflicting train movements which otherwise could
 result in derailing or colliding trains.
 If you want more information, just search for 
\begin_inset Quotes eld
\end_inset

railway interlocking
\begin_inset Quotes erd
\end_inset

 on the internet.
\end_layout

\begin_layout Standard
Real-world interlocking systems perform this task by setting routes.
 A route is a path along a track that a train can safely pass.
 To set a route for a train, the signalman (the operator of a signal box)
 has to set switches (turnouts) to the correct position and lock them in
 order to make a signal for a train show 
\begin_inset Quotes eld
\end_inset

Proceed
\begin_inset Quotes erd
\end_inset

.
 In newer systems, this is done automatically by the interlocking system.
 A route can not be set if switches are locked to a wrong position by another
 route or if any portion of the route is occupied by a train.
\end_layout

\begin_layout Standard
The interlocking system in this Minetest mod tries to follow real-world
 interlocking systems as far as applicable.
 It divides tracks into track sections and implements a route setting mechanism
 following the same principle.
\end_layout

\begin_layout Standard
However, for the sake of simplicity of implementation and usage, not all
 concepts of real-world interlocking have been taken over.
 Especially, there is no mechanism for overlap.
\end_layout

\begin_layout Standard
If you are looking for a place to learn how real-world interlocking systems
 work, have a look at 
\begin_inset Quotes eld
\end_inset

SimSig
\begin_inset Quotes erd
\end_inset

.
 By looking at their simulations, you can obtain experience on how to set
 up your own interlocking systems in AdvTrains.
 The SimSig glossary is a good place to look up unknown terms in this document.
\end_layout

\begin_layout Section
Setting up track sections
\end_layout

\begin_layout Standard
In the real world, a line of track is divided into so-called track sections,
 or track circuits.
 Those systems often can not tell where exactly a train is, but only which
 track sections it occupies.
 A route can never be set through an occupied track section.
\end_layout

\begin_layout Standard
A track section often covers:
\end_layout

\begin_layout Itemize
A section on a main running line, between two signals
\end_layout

\begin_layout Itemize
A single turnout
\end_layout

\begin_layout Itemize
A rail crossing, or a set of turnouts acting as a double/single slip switch
\end_layout

\begin_layout Itemize
A siding
\end_layout

\begin_layout Standard
You will find some examples on how to interlock certain patterns later.
\end_layout

\begin_layout Subsection
Track Circuit Breaks
\end_layout

\begin_layout Standard
In this mod, you will not directly configure the locations of track sections.
 Instead, you designate the borders of each track section using a special
 node, the Track Circuit Break, abbreviated TCB.
\end_layout

\begin_layout Standard
For example, if you want to create a track section for a piece of a main
 running line, you set up two TCBs at the ends of this track circuit.
\end_layout

\begin_layout Standard
Setting up a TCB works as follows:
\end_layout

\begin_layout Enumerate
Place a TCB node somewhere near the place where the circuit break is going
 to be located.
\end_layout

\begin_layout Enumerate
Right-click the TCB node
\end_layout

\begin_layout Enumerate
Punch the rail which should act as TCB
\end_layout

\begin_layout Standard
The result should look like this:
\end_layout

\begin_layout Standard
\begin_inset Graphics
	filename lyx_img/screenshot_20180830_142551.png
	width 10cm

\end_inset


\end_layout

\begin_layout Standard
Now you have assigned the TCB node to a rail.
 Right-click the TCB node once again.
 This will bring up a form which looks as follows:
\end_layout

\begin_layout Standard
\begin_inset Graphics
	filename lyx_img/Bildschirmfoto_2018-08-30_14-26-35.png
	width 10cm

\end_inset


\end_layout

\begin_layout Standard
You see that the form is divided in side A and side B.
 To designate where each side is, a marker is displayed on the rail.
 You can always make this marker show up by punching the TCB node, and remove
 it by punching the marker.
 Both sides are shown as 
\begin_inset Quotes eld
\end_inset

End of interlocking
\begin_inset Quotes erd
\end_inset

.
 This means that there is no track section set up at this place.
\end_layout

\begin_layout Standard
You should repeat this procedure once again a few meters away from the first
 TCB to create a second TCB on the same track.
\end_layout

\begin_layout Standard
\begin_inset Graphics
	filename lyx_img/Bildschirmfoto_2018-08-30_14-32-48.png
	width 10cm

\end_inset


\end_layout

\begin_layout Standard
Once you have both bordering TCBs set up, you can now create the actual
 track section.
 To do this:
\end_layout

\begin_layout Enumerate
Right-click one of the TCBs
\end_layout

\begin_layout Enumerate
Locate the correct side (A or B) to create the track section
\end_layout

\begin_layout Enumerate
Click 
\begin_inset Quotes eld
\end_inset

Create interlocked Track Section
\begin_inset Quotes erd
\end_inset

 in the formspec on the chosen side.
\end_layout

\begin_layout Standard
Now, the text on the formspec has changed.
 It shows something like this:
\end_layout

\begin_layout Standard
\begin_inset Graphics
	filename lyx_img/Bildschirmfoto_2018-08-30_14-27-25.png
	width 5cm

\end_inset


\end_layout

\begin_layout Standard
Clicking 
\begin_inset Quotes eld
\end_inset

Show Track Section
\begin_inset Quotes erd
\end_inset

 brings up another formspec:
\end_layout

\begin_layout Standard
\begin_inset Graphics
	filename lyx_img/Bildschirmfoto_2018-08-30_14-28-32.png
	width 5cm

\end_inset


\end_layout

\begin_layout Standard
On the top, you see a list of all TCBs that border this track section.
 In your case, there should be two TCBs listed.
 If there's only one, head over to 
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Long-track-sections,"

\end_inset

.
 You should now select a name for the track section, to identify it later.
\end_layout

\begin_layout Standard
The same procedure is applicable when you create a turnout track section,
 except that you have to set up three or more TCBs.
\end_layout

\begin_layout Standard
The AdvTrains interlocking system allows you to add more TCBs after you
 have created a track section.
 This works without problems in most cases.
 For example, you can easily insert a turnout into an already set-up track
 section and create another TCB behind it, and AdvTrains will automatically
 detect the existing track section.
 Problems arise only if you try to insert a TCB in-between a section, in
 which case both sides of the TCB will end up assigned to the same section.
 The code currently does not handle this case properly, so try to avoid
 this situation by all means.
 As a last resort, you can always dissolve a faulty track section, as described
 in the next chapter.
\end_layout

\begin_layout Subsection
Long track sections, crossings and other edge cases
\begin_inset CommandInset label
LatexCommand label
name "subsec:Long-track-sections,"

\end_inset


\end_layout

\begin_layout Subsubsection
Very long track sections
\end_layout

\begin_layout Standard
If you try to set up a track section that is longer than 1000 nodes, advtrains
 won't recognize the TCB at the other end because of a safety limit in the
 traverser function, which is supposed to prevent deadlocks.
 This case has happened when the Track Section overview screen only shows
 one TCB in the list.
 The procedure for this is as follows:
\end_layout

\begin_layout Enumerate
Go to the second TCB (the one that wasn't recognized).
 It should show 
\begin_inset Quotes eld
\end_inset

End of Interlocking
\begin_inset Quotes erd
\end_inset

 on the relevant side.
\end_layout

\begin_layout Enumerate
Click 
\begin_inset Quotes eld
\end_inset

Create interlocked track section
\begin_inset Quotes erd
\end_inset

.
 The section created will be different from the one that is already present.
\end_layout

\begin_layout Enumerate
In the track section overview, click 
\begin_inset Quotes eld
\end_inset

Join into other section
\begin_inset Quotes erd
\end_inset


\end_layout

\begin_layout Enumerate
Go back to the first TCB, bring up the Track Section overview screen of
 the first track section and click 
\begin_inset Quotes eld
\end_inset

Join with ???
\begin_inset Quotes erd
\end_inset


\end_layout

\begin_layout Standard
The other, missing TCB should now appear in the list.
 If you accidentally started such a joining procedure, click the 
\begin_inset Quotes eld
\end_inset

X
\begin_inset Quotes erd
\end_inset

 button on the right.
\end_layout

\begin_layout Subsubsection
Rail crosses
\end_layout

\begin_layout Standard
Since rail crosses are created by laying tracks across each other without
 logical connection, there's no way for advtrains to know whether rails
 cross each other.
\end_layout

\begin_layout Standard
Rail crossings in interlocking systems are always one single track section,
 which in most cases has 4 TCBs adjacent.
\end_layout

\begin_layout Standard
\begin_inset Graphics
	filename lyx_img/Bildschirmfoto_2018-08-30_14-51-25.png
	width 5cm

\end_inset


\end_layout

\begin_layout Standard
The procedure is quite similar to the one for long sections: First, create
 two track sections for the branches, and then use the 
\begin_inset Quotes eld
\end_inset

Join
\begin_inset Quotes erd
\end_inset

 function to merge both sections into one.
\end_layout

\begin_layout Subsubsection
Deleting and re-adding single TCBs to a section
\end_layout

\begin_layout Standard
In some occasions, for example when you remove a siding or a crossover,
 it can be necessary to unassign a TCB from a track section.
 There are multiple ways to do this:
\end_layout

\begin_layout Itemize
In the TCB form, click the 
\begin_inset Quotes eld
\end_inset

Remove from section
\begin_inset Quotes erd
\end_inset

 button
\end_layout

\begin_layout Itemize
In the track section form, first select the TCB in the list and then click
 
\begin_inset Quotes eld
\end_inset

Unlink selected TCB
\begin_inset Quotes erd
\end_inset


\end_layout

\begin_layout Standard
The result is that the TCB shows 
\begin_inset Quotes eld
\end_inset

End of Interlocking
\begin_inset Quotes erd
\end_inset

 and the section does not list the TCB as an endpoint anymore.
\end_layout

\begin_layout Standard
The other case is adding a siding or a crossover, in which case one or more
 TCBs still show 
\begin_inset Quotes eld
\end_inset

End of Interlocking
\begin_inset Quotes erd
\end_inset

 although they should be part of a section:
\end_layout

\begin_layout Itemize
Go to another TCB that is registered in the track section and click 
\begin_inset Quotes eld
\end_inset

Update near TCBs
\begin_inset Quotes erd
\end_inset


\end_layout

\begin_layout Itemize
If that did not work, follow the procedure of creating a long track section
\end_layout

\begin_layout Subsubsection
Dissolving sections
\end_layout

\begin_layout Standard
If you made a mistake setting up something and you don't see any other way
 to fix a misconfigured track section, you can always delete it using the
 
\begin_inset Quotes eld
\end_inset

Dissolve section
\begin_inset Quotes erd
\end_inset

 button.
 This operation removes the track section and sets all TCBs that previously
 belonged to the section as 
\begin_inset Quotes eld
\end_inset

End of Interlocking
\begin_inset Quotes erd
\end_inset

.
 This will always work and lets you start over new with setting up track
 sections.
\end_layout

\begin_layout Subsection
Interlocking patterns
\end_layout

\begin_layout Standard
Have a look at the following images.
 They show you how you can set up sections so that reasonable train moves
 are possible.
\end_layout

\begin_layout Standard
You should settle on a naming scheme for your sections.
 This way, you can determine the source of an issue faster
\end_layout

\begin_layout Section
Signals and routes
\end_layout

\begin_layout Standard
Signals are appliances that can give instructions to trains.
 That can be the permission to proceed, a speed restriction, or other informatio
n.
\end_layout

\begin_layout Standard
There are 2 types of signals:
\end_layout

\begin_layout Itemize
Static signals always display the same information to the train.
 This can be a speed restriction (or the end of one), a disallowal to proceed
 as shunt move or similar things.
 In most cases, these are signs.
\end_layout

\begin_layout Itemize
Dynamic signals are what most people would call a 
\begin_inset Quotes eld
\end_inset

signal
\begin_inset Quotes erd
\end_inset

.
 Its function is to inform trains about whether and at which speed they
 can proceed into the next section safely.
\end_layout

\begin_layout Subsection
Signal Influence Point
\end_layout

\begin_layout Standard
Every signal is associated to a track on which the instruction should be
 followed.
 Signals are usually placed right next to the track on the right side.
 Human observers do know then that the signal belongs to the track left
 of it, however, train safety systems (like the one in advtrains) can not.
\end_layout

\begin_layout Standard
This is the reason why a so-called 
\begin_inset Quotes eld
\end_inset

influence point
\begin_inset Quotes erd
\end_inset

 needs to be assigned to any signal that should actually give instructions
 to trains, should the driver (if even there is one) fail to recognize the
 instructions.
\end_layout

\begin_layout Standard
Depending on the signal and the mod that adds the signal, there are different
 ways to configure this.
 Signals integrated into advtrains behave as follows:
\end_layout

\begin_layout Itemize
Static signals and all red-green light signals from core advtrains that
 are not assigned to a TCB can be configured by holding the 
\begin_inset Quotes eld
\end_inset

Use
\begin_inset Quotes erd
\end_inset

 key and then right-clicking the signal
\end_layout

\begin_layout Itemize
All signals that are assigned to a TCB can be configured by first right-clicking
 them, then selecting 
\begin_inset Quotes eld
\end_inset

Influence Point
\begin_inset Quotes erd
\end_inset

 in the signalling formspec.
\end_layout

\begin_layout Standard
The small formspec that opens allows you to set and later view or clear
 the Influence Point.
 To set the influence point, click the 
\begin_inset Quotes eld
\end_inset

Set
\begin_inset Quotes erd
\end_inset

 button, face towards the signal and punch a rail about 2m in front of the
 signal.
 A small marker will be shown, indicating success.
 To cancel setting an influence point, punch anything other.
 (note that then the influence point remains unset, regardless of its previous
 state)
\end_layout

\begin_layout Standard
The advtrains-internal train safety system ensures that the train always
 obeys any restrictions imposed by signals, if (and only if) the influence
 point is set properly.
\end_layout

\begin_layout Subsection
Signal Aspects
\end_layout

\begin_layout Standard
While static signals are mainly used for speed restrictions, the interesting
 ones are variable signals.
 Of course, you can always control any variable signal by traditional means
 (mesecons, digiline, right-click) if the signal allows it, but that misses
 the point of this interlocking system.
\end_layout

\begin_layout Standard
A signal aspect is a piece of information that a signal shows to the train
 driver.
 It contains information about whether and at what speed the driver may
 proceed at the signal.
\end_layout

\begin_layout Standard
Every signal, both static and dynamic ones, imposes a certain aspect to
 trains passing the signal.
 For static signals, this is always the same aspect, such as 
\begin_inset Quotes eld
\end_inset

Proceed at speed of 8
\begin_inset Quotes erd
\end_inset

 or 
\begin_inset Quotes eld
\end_inset

Shunt moves may not pass
\begin_inset Quotes erd
\end_inset

.
 Dynamic signals, however, can display multiple different aspects.
 The default for them is always as restrictive as possible, mostly 
\begin_inset Quotes eld
\end_inset

Halt!
\begin_inset Quotes erd
\end_inset

.
\end_layout

\begin_layout Standard
You should know that both static and dynamic signals use exactly the same
 properties for signal aspects.
 There is no difference in the meaning of the aspect definitions.
\end_layout

\begin_layout Standard
In the following sections, we will talk about main signals.
 By this, we mean a variable signal that can display both a 
\begin_inset Quotes eld
\end_inset

Danger
\begin_inset Quotes erd
\end_inset

 aspect (trains are not allowed to proceed) and at least one 
\begin_inset Quotes eld
\end_inset

Proceed
\begin_inset Quotes erd
\end_inset

 aspect (train may proceed as train/shunt move, with optional speed restriction)
, which act as an 
\begin_inset Quotes eld
\end_inset

entry signal
\begin_inset Quotes erd
\end_inset

 for one or multiple routes.
\end_layout

\begin_layout Subsection
Train moves and Shunt Moves
\end_layout

\begin_layout Itemize
A 
\begin_inset Quotes eld
\end_inset

Train move
\begin_inset Quotes erd
\end_inset

 is a train that is running, going to run on or coming from a main line
 between stations, passing through or stopping at a station.
 Train moves can expect that there are no obstacles on the route and they
 can proceed at the maximum permitted speed of the line.
 This is the regular operation mode for trains.
 Shunt signals have no meaning for train moves.
\end_layout

\begin_layout Itemize
A 
\begin_inset Quotes eld
\end_inset

Shunt move
\begin_inset Quotes erd
\end_inset

 is a train that moves within a station and/or is coupling or decoupling
 wagons or engines.
 A shunt move may never leave a station except into a siding.
 Also, shunt moves may drive at a maximum speed of 6 speed units, because
 it is usually not ensured that the path is free of obstacles.
 (however, advtrains ensures that every route is free of railway vehicles,
 even shunt routes)
\end_layout

\begin_layout Standard
There are also 2 general types of signals: Main signals and Shunt signals.
 While main signals have a meaning for all types of trains, Shunt signals
 only have to be followed by shunt moves.
 Usually, Shunt signals that are on a train move route are set to a Proceed
 aspect as well.
\end_layout

\begin_layout Standard
When a train reverses, its mode automatically changes to 
\begin_inset Quotes eld
\end_inset

shunt move
\begin_inset Quotes erd
\end_inset

 until it passes a main signal that shows 
\begin_inset Quotes eld
\end_inset

Proceed as train move
\begin_inset Quotes erd
\end_inset

, which is usually designated by a green light.
 From this point on, it can accelerate to maximum permitted speed.
\end_layout

\begin_layout Standard
Some main signals, like the ones from the Ks signals mod included by default,
 can also display 
\begin_inset Quotes eld
\end_inset

Proceed as shunt move
\begin_inset Quotes erd
\end_inset

, which is designated by 2 white lights along with the red light.
 Once a train passes this signal, it becomes a shunt move.
\end_layout

\begin_layout Subsection
The concept of routes
\end_layout

\begin_layout Standard
A so-called route is a locked path between two main signals, which locks
 all turnouts in the correct position.
 Its purpose is to offer a train a path on which it can safely proceed without
 interfering with any other train.
 A route always incorporates and locks one to multiple track sections, starting
 with the one that lies directly behind the 
\begin_inset Quotes eld
\end_inset

entry
\begin_inset Quotes erd
\end_inset

 signal.
\end_layout

\begin_layout Standard
Example: Imagine a station with 2 platforms on a single track running line.
 We are looking at signal A.
 You probably want trains coming from the right to go into platform 1 or
 into platform 2, so you need to program 2 routes.
\end_layout

\begin_layout Standard
\begin_inset Graphics
	filename lyx_img/route_ex1.png
	width 7cm

\end_inset


\end_layout

\begin_layout Standard
This leads us to the most important aspect of route programming: Routes
 always start at a signal (A) and end at a signal facing in the 
\series bold
same direction
\series default
 (D and E), not at an opposite-facing signal (B and C).
 There are only few exceptions, we'll cover this later.
\end_layout

\begin_layout Standard
When you set a route to make a train proceed on it, the interlocking system
 ensures that:
\end_layout

\begin_layout Itemize
There are no rail vehicles on the route
\end_layout

\begin_layout Itemize
All turnouts are set to the correct position and it is impossible to move
 them
\end_layout

\begin_layout Itemize
No other routes can be set that would in any way conflict with this route
\end_layout

\begin_layout Standard
For this to work, you need to specify all track sections the train will
 pass along, as well as the positions of all turnouts that need to be locked.
 Those are not only the turnouts that lay directly on the train's route,
 but also some turnouts on adjacent tracks, the so-called flank protection.
\end_layout

\begin_layout Standard
The purpose of flank protection is to prevent runaway trains and/or wagons
 to pass into a route.
 This is achieved by setting nearby turnouts to a position that points 
\begin_inset Quotes eld
\end_inset

away
\begin_inset Quotes erd
\end_inset

 from the route.
 Example:
\end_layout

\begin_layout Standard
\begin_inset Graphics
	filename lyx_img/route_ex2.png
	width 7cm

\end_inset


\end_layout

\begin_layout Standard
The upper turnout, of course, needs to be locked in straight (normal) position,
 while the lower one is not relevant for the route itself.
 But what if the lower turnout was set to the diverging (reverse) position
 and the driver of another train approaching signal B fails to see the red
 light? This train would crash into the first one.
 To minimise danger, that other train would need to be routed towards signal
 D.
\end_layout

\begin_layout Standard
There are, of course, situations, where both positions of a turnout would
 conflict with a route equally.
 In those situations, there's nothing you can do and no flank lock needs
 to be set.
\end_layout

\begin_layout Subsection
Assigning main signals to TCBs
\end_layout

\begin_layout Standard
Main signals in the advtrains interlocking system are positioned - like
 in real life - at the border of track sections, because routes also start
 and end there.
 For advtrains to know from which signal which routes can be set, you need
 to assign the signal to a TCB.
\end_layout

\begin_layout Standard
To do this, perform the following steps:
\end_layout

\begin_layout Enumerate
If not already happened, set up a TCB (you don't need to, but are advised
 to, configure track sections there)
\end_layout

\begin_layout Enumerate
Place the signal a few meters in front of the TCB, so that trains stopping
 at the signal do never pass the TCB
\end_layout

\begin_layout Enumerate
Locate the side of the TCB which points in the direction that trains will
 proceed past the signal, as shown in the figure below.
\end_layout

\begin_layout Enumerate
Right-click the TCB, and click 
\begin_inset Quotes eld
\end_inset

Assign a signal
\begin_inset Quotes erd
\end_inset

 on this side.
\end_layout

\begin_layout Enumerate
Punch the signal.
\end_layout

\begin_layout Standard
\begin_inset Graphics
	filename lyx_img/assign_signal.png
	width 8cm

\end_inset


\end_layout

\begin_layout Standard
If you haven't set an influence point for the signal yet, the influence
 point formspec automatically opens.
\end_layout

\begin_layout Standard
You can assign a signal to each side of a TCB.
 This is, for example, useful when creating block sections on a bi-directional
 main running line.
\end_layout

\begin_layout Standard
Only main signals can ever be assigned to TCBs, because static ones can
 either not display 
\begin_inset Quotes eld
\end_inset

Danger
\begin_inset Quotes erd
\end_inset

 or do not permit to proceed at all.
\end_layout

\begin_layout Subsection
Shunt routes
\end_layout

\begin_layout Standard

\series bold
The information in this section is subject to future change because of safety
 issues!
\end_layout

\begin_layout Standard
Operating railways is not all about driving trains around.
 Coupling, decoupling and moving single engines, wagons or groups of wagons
 across a station, called shunting, also plays an important role.
\end_layout

\begin_layout Standard
Remember what we said about routes: There must be no rail vehicles on the
 route.
 So what if you have some goods wagons ready on a siding, and want to couple
 an engine to it? You can not set a regular route into the siding, because
 it is occupied.
\end_layout

\begin_layout Standard
The solution is to program a second route into the siding, but with the
 difference that it already ends at the rear-facing signal of it, so it
 doesn't include the siding section itself:
\end_layout

\begin_layout Standard
\begin_inset Graphics
	filename lyx_img/route_ex3.png
	width 7cm

\end_inset


\end_layout

\begin_layout Standard
The Sht2 route then needs to show a shunt aspect, which instructs the driver
 to proceed slowly and watch out for vehicles on the route.
 See later on for how to set this up.
\end_layout

\begin_layout Standard
Shunt routes like this are, so far, the only exception to the 
\begin_inset Quotes eld
\end_inset

Routes should end at a signal facing the same direction
\begin_inset Quotes erd
\end_inset

 rule.
\end_layout

\begin_layout Subsection
Route Release
\end_layout

\begin_layout Standard
In early real-life interlocking systems, routes either had to be cancelled
 by the signalman after the train had passed the route, or there was a single
 release contact at the end of the route.
 However, as interlocking systems evolved and the position of trains is
 now roughly known by the track sections, portions of the route can be freed
 as soon as the train has left the corresponding section.
\end_layout

\begin_layout Standard
AdvTrains has chosen a modern approach to route releasing.
 Each turnout lock is associated to a track section belonging to the route's
 path.
 Once the train leaves this section, all assigned locks are also freed.
\end_layout

\begin_layout Standard
Please note that reversing a train outside of stations is not only discouraged,
 but also very dangerous, because even real-world interlocking system do
 not expect this.
 There is a clear, human-sense rule that you should never reverse the driving
 direction of a train while on a main line or on a turnout.
 Else, you can be considered a terrorist.
 (quote from professional!)
\end_layout

\begin_layout Subsection
Programming a route
\end_layout

\begin_layout Standard
The route programming procedure is quite straightforward if you've read
 the previous sections and understood how routes should be set.
\end_layout

\begin_layout Standard
Routes always start at a main signal.
 You must have assigned the signal to a TCB, as described earlier.
\end_layout

\begin_layout Standard
When you right-click the main signal, it no longer changes its aspect.
 Instead, a formspec pops up, showing you an (empty) list of routes with
 the possibility to set them or to create new routes.
 Click the 
\begin_inset Quotes eld
\end_inset

Create new route
\begin_inset Quotes erd
\end_inset

 button to start programming a new route.
\end_layout

\begin_layout Standard
The form closes, and an arrow is displayed on the TCB.
 You are now in 
\begin_inset Quotes eld
\end_inset

Route Programming
\begin_inset Quotes erd
\end_inset

 mode, programming the first track section of the route.
 Now:
\end_layout

\begin_layout Itemize
Put any turnouts you need to lock in the correct position (e.g.
 by right-clicking them).
 This includes flank protection.
\end_layout

\begin_layout Itemize
Punch them.
 This makes a marker with a blue lock symbol appear.
\end_layout

\begin_layout Itemize
If you punch a turnout again, or punch the marker, you can remove the lock
 again.
\end_layout

\begin_layout Itemize
When you've locked all turnouts in the current section, go to and punch
 the TCB that is the border to the next track section the train proceeds
 into.
\end_layout

\begin_layout Standard
Depending on the situation, you are now offered some possibilities to proceed:
\end_layout

\begin_layout Itemize
Click the 
\begin_inset Quotes eld
\end_inset

Advance to next section
\begin_inset Quotes erd
\end_inset

 button if your route consists of more sections with turnouts to lock, and
 you need to continue programming.
 Follow the above steps to set locks for the next section.
\end_layout

\begin_layout Standard
Once you've clicked the 
\begin_inset Quotes eld
\end_inset

Advance
\begin_inset Quotes erd
\end_inset

 button, the lock markers change to a red lock symbol, telling they can't
 be changed anymore.
 Repeat the above procedure until you are ready to complete the programming
 procedure:
\end_layout

\begin_layout Itemize
Click the 
\begin_inset Quotes eld
\end_inset

Finish route HERE
\begin_inset Quotes erd
\end_inset

 button when you've set up the locks for the last track section of the route
 and punched the final TCB (the one with the next signal).
 You will be asked for a route name and your route will be saved.
\end_layout

\begin_layout Itemize
The 
\begin_inset Quotes eld
\end_inset

Finish route at end of NEXT section
\begin_inset Quotes erd
\end_inset

 button (third button) is an useful quickhand to make the route proceed
 one more section.
 Using this button is equivalent to first clicking the 
\begin_inset Quotes eld
\end_inset

Advance
\begin_inset Quotes erd
\end_inset

 button, then flying to the end of the next track section and finishing
 the route there.
 You can not (officially) set turnout locks in the final section using this
 method.
\end_layout

\begin_layout Standard
A few hints:
\end_layout

\begin_layout Itemize
If you accidentally advanced the route wrongly, you can use the 
\begin_inset Quotes eld
\end_inset

Step back one section
\begin_inset Quotes erd
\end_inset

 button to undo this.
\end_layout

\begin_layout Itemize
If you want to stop programming the entire route without saving it, use
 the 
\begin_inset Quotes eld
\end_inset

Cancel route programming
\begin_inset Quotes erd
\end_inset

 button.
\end_layout

\begin_layout Itemize
The third button is especially useful for programming simple block sections
 on a main running line, since you can stay at the starting signal (punch
 starting TCB and select third button).
\end_layout

\begin_layout Itemize
If a route should end in a dead end, you MUST use the 
\begin_inset Quotes eld
\end_inset

Finish in NEXT section
\begin_inset Quotes erd
\end_inset

 button, because there is no final TCB that you could punch.
\end_layout

\begin_layout Itemize
The third button does NOT work on sections with more than 2 exits, because
 the system won't be able to determine the final TCB of the route then.
\end_layout

\begin_layout Subsection
Route information screen
\end_layout

\begin_layout Standard
\begin_inset Graphics
	filename lyx_img/Bildschirmfoto_2019-01-15_19-28-09.png
	width 10cm

\end_inset


\end_layout

\begin_layout Standard
This is the screen that appears when you click 
\begin_inset Quotes eld
\end_inset

Edit Route
\begin_inset Quotes erd
\end_inset

.
 It lets you change the route name and delete the route.
 Also, it shows a summary of the route and its elements.
\end_layout

\begin_layout Standard
The route summary lists information per track section on the route, so the
 line starting with 
\begin_inset Quotes eld
\end_inset

1
\begin_inset Quotes erd
\end_inset

 is the first section of the route.
\end_layout

\begin_layout Standard
The ARS rule list and its purpose is explained later.
\end_layout

\begin_layout Subsection
Specifying signal aspects
\end_layout

\begin_layout Standard
By default, newly programmed routes show an aspect that comes closest to
 
\begin_inset Quotes eld
\end_inset

Proceed at maximum speed
\begin_inset Quotes erd
\end_inset

.
 However, it can be desirable to change this behavior, like when the route
 passes a diverging turnout, the train should be signalled to drive slower,
 or the route is a shunt route and therefore only 
\begin_inset Quotes eld
\end_inset

Shunting allowed
\begin_inset Quotes erd
\end_inset

 should be shown.
\end_layout

\begin_layout Standard
This is the purpose of the 
\begin_inset Quotes eld
\end_inset

Change Aspect
\begin_inset Quotes erd
\end_inset

 button in the route info screen.
\end_layout

\begin_layout Standard
Signal aspects in advtrains consist of 4 sections: main (Information for
 train moves), dst (Distant signal information, not implemented yet), shunt
 (Information for shunt moves) and info (additional information, currently
 not in use).
\end_layout

\begin_layout Itemize
Train may proceed as train move at maximum speed: 
\begin_inset Quotes eld
\end_inset

main: free, speed -1
\begin_inset Quotes erd
\end_inset


\end_layout

\begin_layout Itemize
Train may proceed as train move at speed of 8: 
\begin_inset Quotes eld
\end_inset

main: free, speed 8
\begin_inset Quotes erd
\end_inset


\end_layout

\begin_layout Itemize
Train may proceed as shunt move: 
\begin_inset Quotes eld
\end_inset

shunt: free
\begin_inset Quotes erd
\end_inset


\end_layout

\begin_layout Standard
There's a field in the 
\begin_inset Quotes eld
\end_inset

shunt
\begin_inset Quotes erd
\end_inset

 part of signal aspects that is not displayed in the GUI, but is of potential
 interest to developers of signal addons: shunt.proceed_as_main.
\end_layout

\begin_layout Itemize
A train move can always become a shunt move by passing a signal that shows
 
\begin_inset Quotes eld
\end_inset

Halt for train moves, shunting permitted
\begin_inset Quotes erd
\end_inset


\end_layout

\begin_layout Itemize
A shunt move can only pass a signal saying 
\begin_inset Quotes eld
\end_inset

Proceed as train move, shunting not permitted
\begin_inset Quotes erd
\end_inset

 when proceed_as_main is true.
\end_layout

\begin_layout Standard
The property is used by the Limit Of Shunt sign, where proceed_as_main is
 set to false.
 Shunt moves have to stop in front of it, while train moves are signalled
 
\begin_inset Quotes eld
\end_inset

Proceed
\begin_inset Quotes erd
\end_inset

.
 Regular main signals that show 
\begin_inset Quotes eld
\end_inset

green
\begin_inset Quotes erd
\end_inset

 have the field set to true, so that all trains can pass it.
\end_layout

\begin_layout Section
Interlocking system operation
\end_layout

\begin_layout Standard
Setting up the interlocking for a portion of a railway network requires
 some time, experience and planning, but once done, there's not much to
 do anymore to make trains run on your, now safer, railway.
 This section covers some useful practices to route trains across your network.
\end_layout

\begin_layout Standard
At the moment, routes can either be set by clicking the signal or via LuaATC,
 or by using the 
\begin_inset Quotes eld
\end_inset

Remote Routesetting
\begin_inset Quotes erd
\end_inset

 button from the Onboard Computer.
 It is planned to control this via a 
\begin_inset Quotes eld
\end_inset

signal box
\begin_inset Quotes erd
\end_inset

 view based on the currently broken itrainmap.
\end_layout

\begin_layout Subsection
Train Safety System
\end_layout

\begin_layout Standard
The Train Safety System, called 
\begin_inset Quotes eld
\end_inset

LZB
\begin_inset Quotes erd
\end_inset

 in the code (from the german term Linienzugbeeinflussung, although this
 is a completely different system), ensures that trains obey any restrictions
 imposed by signals when influence points are set.
 This way, it is not possible to pass signals at danger or to bypass speed
 restrictions.
\end_layout

\begin_layout Standard
It is possible to overrun red signals, if a route is cancelled while a train
 is approaching.
 Real interlocking systems use a mechanism called Approach locking for this,
 however, as of now, there's no similar system in this mod.
 If a red signal is overrun, the train brakes using emergency brake (
\begin_inset Quotes eld
\end_inset

BB
\begin_inset Quotes erd
\end_inset

) and can not be moved any further.
 You should then examine the situation and drive the train backwards out
 of the section.
\end_layout

\begin_layout Subsection
Simple route setting and cancelling
\end_layout

\begin_layout Standard
To set a route, simply right-click the signal, select a route and click
 
\begin_inset Quotes eld
\end_inset

set route
\begin_inset Quotes erd
\end_inset

.
 If there are no conflicts, the signal turns green and the train is allowed
 to proceed.
\end_layout

\begin_layout Standard
It may be possible that the route can not be set, because one or more other
 routes conflict with the current one, or a section is blocked.
 In this case, the signal stays red, and the conflicting item is shown in
 the formspec.
 As soon as the conflict is resolved (by cancellation or release of the
 conflicting route, or the section becoming free), the requested route will
 be set and the signal turns green.
\end_layout

\begin_layout Standard
If a route is either requested or set, it can be cancelled from the signalling
 formspec.
 This means that all turnouts and sections are released, and the signal
 reverts back to red.
 This of course only works when the train has not passed the signal yet.
 There is no mechanism for Approach Locking.
\end_layout

\begin_layout Subsection
Automatic Working
\end_layout

\begin_layout Standard
Block signals on main running lines usually only have a single route to
 set, the one proceeding along the main line.
 Their purpose is only to show whether there are trains in the next section.
 So, it would be convenient if this only route would set itself again after
 a train passed.
\end_layout

\begin_layout Standard
This is what Automatic Working is for.
 Set a route, click 
\begin_inset Quotes eld
\end_inset

Enable Automatic Working
\begin_inset Quotes erd
\end_inset

, and as soon as a train passes, the route is automatically re-set.
\end_layout

\begin_layout Standard
This function is nearly identical to SimSig automatic signals.
 It can also be useful on a line with high traffic, when there's a low-frequente
d access to a siding.
 You'd enable automatic working for the main route and cancel it only when
 you need a train to go into the siding.
\end_layout

\begin_layout Subsection
Automatic Route Setting (ARS)
\end_layout

\begin_layout Standard
As interlocking systems evolved, the goal always was to offload work from
 the human to the system, automating things.
 Modern interlocking systems can automatically set routes based on a pre-program
med routing table for each particular train.
 Since one outstanding feature of Advtrains is it's high degree of automation,