aboutsummaryrefslogtreecommitdiff
path: root/src/mapgen
diff options
context:
space:
mode:
Diffstat (limited to 'src/mapgen')
-rw-r--r--src/mapgen/mapgen_valleys.cpp270
-rw-r--r--src/mapgen/mapgen_valleys.h14
2 files changed, 123 insertions, 161 deletions
diff --git a/src/mapgen/mapgen_valleys.cpp b/src/mapgen/mapgen_valleys.cpp
index 543d926a5..72f478803 100644
--- a/src/mapgen/mapgen_valleys.cpp
+++ b/src/mapgen/mapgen_valleys.cpp
@@ -32,6 +32,7 @@ with this program; if not, write to the Free Software Foundation, Inc.,
#include "map.h"
#include "nodedef.h"
#include "voxelalgorithms.h"
+//#include "profiler.h" // For TimeTaker
#include "settings.h" // For g_settings
#include "emerge.h"
#include "dungeongen.h"
@@ -43,26 +44,18 @@ with this program; if not, write to the Free Software Foundation, Inc.,
#include <cmath>
-//#undef NDEBUG
-//#include "assert.h"
-
-//#include "util/timetaker.h"
-//#include "profiler.h"
-
-
-//static Profiler mapgen_prof;
-//Profiler *mapgen_profiler = &mapgen_prof;
-
static FlagDesc flagdesc_mapgen_valleys[] = {
{"altitude_chill", MGVALLEYS_ALT_CHILL},
{"humid_rivers", MGVALLEYS_HUMID_RIVERS},
{NULL, 0}
};
-///////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////////
-MapgenValleys::MapgenValleys(int mapgenid, MapgenValleysParams *params, EmergeManager *emerge)
+
+MapgenValleys::MapgenValleys(int mapgenid, MapgenValleysParams *params,
+ EmergeManager *emerge)
: MapgenBasic(mapgenid, params, emerge)
{
// NOTE: MapgenValleys has a hard dependency on BiomeGenOriginal
@@ -72,8 +65,8 @@ MapgenValleys::MapgenValleys(int mapgenid, MapgenValleysParams *params, EmergeMa
spflags = params->spflags;
altitude_chill = params->altitude_chill;
- river_depth_bed = params->river_depth + 1.f;
- river_size_factor = params->river_size / 100.f;
+ river_depth_bed = params->river_depth + 1.0f;
+ river_size_factor = params->river_size / 100.0f;
cave_width = params->cave_width;
large_cave_depth = params->large_cave_depth;
@@ -94,7 +87,8 @@ MapgenValleys::MapgenValleys(int mapgenid, MapgenValleysParams *params, EmergeMa
//// 3D Terrain noise
// 1-up 1-down overgeneration
- noise_inter_valley_fill = new Noise(&params->np_inter_valley_fill, seed, csize.X, csize.Y + 2, csize.Z);
+ noise_inter_valley_fill = new Noise(&params->np_inter_valley_fill,
+ seed, csize.X, csize.Y + 2, csize.Z);
// 1-down overgeneraion
MapgenBasic::np_cave1 = params->np_cave1;
MapgenBasic::np_cave2 = params->np_cave2;
@@ -102,7 +96,7 @@ MapgenValleys::MapgenValleys(int mapgenid, MapgenValleysParams *params, EmergeMa
humid_rivers = (spflags & MGVALLEYS_HUMID_RIVERS);
use_altitude_chill = (spflags & MGVALLEYS_ALT_CHILL);
- humidity_adjust = bp->np_humidity.offset - 50.f;
+ humidity_adjust = bp->np_humidity.offset - 50.0f;
}
@@ -119,16 +113,16 @@ MapgenValleys::~MapgenValleys()
MapgenValleysParams::MapgenValleysParams():
- np_filler_depth (0.f, 1.2f, v3f(256, 256, 256), 1605, 3, 0.5f, 2.f),
- np_inter_valley_fill (0.f, 1.f, v3f(256, 512, 256), 1993, 6, 0.8f, 2.f),
- np_inter_valley_slope (0.5f, 0.5f, v3f(128, 128, 128), 746, 1, 1.f, 2.f),
- np_rivers (0.f, 1.f, v3f(256, 256, 256), -6050, 5, 0.6f, 2.f),
- np_terrain_height (-10.f, 50.f, v3f(1024, 1024, 1024), 5202, 6, 0.4f, 2.f),
- np_valley_depth (5.f, 4.f, v3f(512, 512, 512), -1914, 1, 1.f, 2.f),
- np_valley_profile (0.6f, 0.5f, v3f(512, 512, 512), 777, 1, 1.f, 2.f),
- np_cave1 (0, 12, v3f(61, 61, 61), 52534, 3, 0.5, 2.0),
- np_cave2 (0, 12, v3f(67, 67, 67), 10325, 3, 0.5, 2.0),
- np_cavern (0.f, 1.f, v3f(768, 256, 768), 59033, 6, 0.63f, 2.f)
+ np_filler_depth (0.0, 1.2, v3f(256, 256, 256), 1605, 3, 0.5, 2.0),
+ np_inter_valley_fill (0.0, 1.0, v3f(256, 512, 256), 1993, 6, 0.8, 2.0),
+ np_inter_valley_slope (0.5, 0.5, v3f(128, 128, 128), 746, 1, 1.0, 2.0),
+ np_rivers (0.0, 1.0, v3f(256, 256, 256), -6050, 5, 0.6, 2.0),
+ np_terrain_height (-10.0, 50.0, v3f(1024, 1024, 1024), 5202, 6, 0.4, 2.0),
+ np_valley_depth (5.0, 4.0, v3f(512, 512, 512), -1914, 1, 1.0, 2.0),
+ np_valley_profile (0.6, 0.50, v3f(512, 512, 512), 777, 1, 1.0, 2.0),
+ np_cave1 (0.0, 12.0, v3f(61, 61, 61), 52534, 3, 0.5, 2.0),
+ np_cave2 (0.0, 12.0, v3f(67, 67, 67), 10325, 3, 0.5, 2.0),
+ np_cavern (0.0, 1.0, v3f(768, 256, 768), 59033, 6, 0.63, 2.0)
{
}
@@ -191,7 +185,7 @@ void MapgenValleysParams::writeParams(Settings *settings) const
}
-///////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////////
void MapgenValleys::makeChunk(BlockMakeData *data)
@@ -206,12 +200,12 @@ void MapgenValleys::makeChunk(BlockMakeData *data)
data->blockpos_requested.Y <= data->blockpos_max.Y &&
data->blockpos_requested.Z <= data->blockpos_max.Z);
+ //TimeTaker t("makeChunk");
+
this->generating = true;
this->vm = data->vmanip;
this->ndef = data->nodedef;
- //TimeTaker t("makeChunk");
-
v3s16 blockpos_min = data->blockpos_min;
v3s16 blockpos_max = data->blockpos_max;
node_min = blockpos_min * MAP_BLOCKSIZE;
@@ -221,7 +215,7 @@ void MapgenValleys::makeChunk(BlockMakeData *data)
blockseed = getBlockSeed2(full_node_min, seed);
- // Generate biome noises. Note this must be executed strictly before
+ // Generate biome noises. Note this must be executed strictly before
// generateTerrain, because generateTerrain depends on intermediate
// biome-related noises.
m_bgen->calcBiomeNoise(node_min);
@@ -241,9 +235,8 @@ void MapgenValleys::makeChunk(BlockMakeData *data)
// Generate caverns, tunnels and classic caves
if (flags & MG_CAVES) {
- bool near_cavern = false;
// Generate caverns
- near_cavern = generateCaverns(stone_surface_max_y);
+ bool near_cavern = generateCaverns(stone_surface_max_y);
// Generate tunnels and classic caves
if (near_cavern)
// Disable classic caves in this mapchunk by setting
@@ -269,36 +262,24 @@ void MapgenValleys::makeChunk(BlockMakeData *data)
// Sprinkle some dust on top after everything else was generated
dustTopNodes();
- //TimeTaker tll("liquid_lighting");
-
updateLiquid(&data->transforming_liquid, full_node_min, full_node_max);
if (flags & MG_LIGHT)
- calcLighting(
- node_min - v3s16(0, 1, 0),
- node_max + v3s16(0, 1, 0),
- full_node_min,
- full_node_max);
-
- //mapgen_profiler->avg("liquid_lighting", tll.stop() / 1000.f);
- //mapgen_profiler->avg("makeChunk", t.stop() / 1000.f);
+ calcLighting(node_min - v3s16(0, 1, 0), node_max + v3s16(0, 1, 0),
+ full_node_min, full_node_max);
this->generating = false;
+
+ //printf("makeChunk: %lums\n", t.stop());
}
-// Populate the noise tables and do most of the
-// calculation necessary to determine terrain height.
void MapgenValleys::calculateNoise()
{
- //TimeTaker t("calculateNoise", NULL, PRECISION_MICRO);
-
int x = node_min.X;
int y = node_min.Y - 1;
int z = node_min.Z;
- //TimeTaker tcn("actualNoise");
-
noise_inter_valley_slope->perlinMap2D(x, z);
noise_rivers->perlinMap2D(x, z);
noise_terrain_height->perlinMap2D(x, z);
@@ -307,19 +288,14 @@ void MapgenValleys::calculateNoise()
noise_inter_valley_fill->perlinMap3D(x, y, z);
- //mapgen_profiler->avg("noisemaps", tcn.stop() / 1000.f);
-
- float heat_offset = 0.f;
- float humidity_scale = 1.f;
-
+ float heat_offset = 0.0f;
+ float humidity_scale = 1.0f;
// Altitude chill tends to reduce the average heat.
if (use_altitude_chill)
- heat_offset = 5.f;
-
+ heat_offset = 5.0f;
// River humidity tends to increase the humidity range.
- if (humid_rivers) {
+ if (humid_rivers)
humidity_scale = 0.8f;
- }
for (s32 index = 0; index < csize.X * csize.Z; index++) {
m_bgen->heatmap[index] += heat_offset;
@@ -331,21 +307,19 @@ void MapgenValleys::calculateNoise()
u32 index = 0;
for (tn.z = node_min.Z; tn.z <= node_max.Z; tn.z++)
for (tn.x = node_min.X; tn.x <= node_max.X; tn.x++, index++) {
- // The parameters that we actually need to generate terrain
- // are passed by address (and the return value).
+ // The parameters that we actually need to generate terrain are passed
+ // by address (and the return value).
tn.terrain_height = noise_terrain_height->result[index];
- // River noise is replaced with base terrain, which
- // is basically the height of the water table.
+ // River noise is replaced with base terrain, which is basically the
+ // height of the water table.
tn.rivers = &noise_rivers->result[index];
- // Valley depth noise is replaced with the valley
- // number that represents the height of terrain
- // over rivers and is used to determine about
- // how close a river is for humidity calculation.
+ // Valley depth noise is replaced with the valley number that represents
+ // the height of terrain over rivers and is used to determine how close
+ // a river is for humidity calculation.
tn.valley = &noise_valley_depth->result[index];
tn.valley_profile = noise_valley_profile->result[index];
- // Slope noise is replaced by the calculated slope
- // which is used to get terrain height in the slow
- // method, to create sharper mountains.
+ // Slope noise is replaced by the calculated slope which is used to get
+ // terrain height in the slow method, to create sharper mountains.
tn.slope = &noise_inter_valley_slope->result[index];
tn.inter_valley_fill = noise_inter_valley_fill->result[index];
@@ -356,75 +330,69 @@ void MapgenValleys::calculateNoise()
}
-// This keeps us from having to maintain two similar sets of
-// complicated code to determine ground level.
float MapgenValleys::terrainLevelFromNoise(TerrainNoise *tn)
{
- // The square function changes the behaviour of this noise:
- // very often small, and sometimes very high.
+ // The square function changes the behaviour of this noise: very often
+ // small, and sometimes very high.
float valley_d = MYSQUARE(*tn->valley);
- // valley_d is here because terrain is generally higher where valleys
- // are deep (mountains). base represents the height of the
- // rivers, most of the surface is above.
+ // valley_d is here because terrain is generally higher where valleys are
+ // deep (mountains). base represents the height of the rivers, most of the
+ // surface is above.
float base = tn->terrain_height + valley_d;
- // "river" represents the distance from the river, in arbitrary units.
+ // "river" represents the distance from the river
float river = std::fabs(*tn->rivers) - river_size_factor;
// Use the curve of the function 1-exp(-(x/a)^2) to model valleys.
- // Making "a" vary (0 < a <= 1) changes the shape of the valleys.
- // Try it with a geometry software !
- // (here x = "river" and a = valley_profile).
- // "valley" represents the height of the terrain, from the rivers.
- {
- float t = std::fmax(river / tn->valley_profile, 0.0f);
- *tn->valley = valley_d * (1.f - std::exp(- MYSQUARE(t)));
- }
+ // "valley" represents the height of the terrain, from the rivers.
+ float tv = std::fmax(river / tn->valley_profile, 0.0f);
+ *tn->valley = valley_d * (1.0f - std::exp(-MYSQUARE(tv)));
- // approximate height of the terrain at this point
+ // Approximate height of the terrain at this point
float mount = base + *tn->valley;
*tn->slope *= *tn->valley;
- // Rivers are placed where "river" is negative, so where the original
- // noise value is close to zero.
// Base ground is returned as rivers since it's basically the water table.
*tn->rivers = base;
- if (river < 0.f) {
- // Use the the function -sqrt(1-x^2) which models a circle.
- float depth;
- {
- float t = river / river_size_factor + 1;
- depth = (river_depth_bed * std::sqrt(MYMAX(0, 1.f - MYSQUARE(t))));
- }
+
+ // Rivers are placed where "river" is negative, so where the original noise
+ // value is close to zero.
+ if (river < 0.0f) {
+ // Use the the function -sqrt(1-x^2) which models a circle
+ float tr = river / river_size_factor + 1.0f;
+ float depth = (river_depth_bed *
+ std::sqrt(std::fmax(0.0f, 1.0f - MYSQUARE(tr))));
// base - depth : height of the bottom of the river
- // water_level - 3 : don't make rivers below 3 nodes under the surface
+ // water_level - 3 : don't make rivers below 3 nodes under the surface.
// We use three because that's as low as the swamp biomes go.
// There is no logical equivalent to this using rangelim.
- mount = MYMIN(MYMAX(base - depth, (float)(water_level - 3)), mount);
+ mount =
+ std::fmin(std::fmax(base - depth, (float)(water_level - 3)), mount);
- // Slope has no influence on rivers.
- *tn->slope = 0.f;
+ // Slope has no influence on rivers
+ *tn->slope = 0.0f;
}
return mount;
}
-// This avoids duplicating the code in terrainLevelFromNoise, adding
-// only the final step of terrain generation without a noise map.
+// This avoids duplicating the code in terrainLevelFromNoise, adding only the
+// final step of terrain generation without a noise map.
+
float MapgenValleys::adjustedTerrainLevelFromNoise(TerrainNoise *tn)
{
float mount = terrainLevelFromNoise(tn);
s16 y_start = myround(mount);
for (s16 y = y_start; y <= y_start + 1000; y++) {
- float fill = NoisePerlin3D(&noise_inter_valley_fill->np, tn->x, y, tn->z, seed);
-
+ float fill =
+ NoisePerlin3D(&noise_inter_valley_fill->np, tn->x, y, tn->z, seed);
if (fill * *tn->slope < y - mount) {
- mount = MYMAX(y - 1, mount);
+ mount = std::fmax((float)(y - 1), mount);
break;
}
}
@@ -435,14 +403,14 @@ float MapgenValleys::adjustedTerrainLevelFromNoise(TerrainNoise *tn)
int MapgenValleys::getSpawnLevelAtPoint(v2s16 p)
{
- // Check to make sure this isn't a request for a location in a river.
+ // Check if in a river
float rivers = NoisePerlin2D(&noise_rivers->np, p.X, p.Y, seed);
if (std::fabs(rivers) < river_size_factor)
return MAX_MAP_GENERATION_LIMIT; // Unsuitable spawn point
s16 level_at_point = terrainLevelAtPoint(p.X, p.Y);
if (level_at_point <= water_level ||
- level_at_point > water_level + 32)
+ level_at_point > water_level + 16)
return MAX_MAP_GENERATION_LIMIT; // Unsuitable spawn point
return level_at_point;
@@ -455,7 +423,8 @@ float MapgenValleys::terrainLevelAtPoint(s16 x, s16 z)
float rivers = NoisePerlin2D(&noise_rivers->np, x, z, seed);
float valley = NoisePerlin2D(&noise_valley_depth->np, x, z, seed);
- float inter_valley_slope = NoisePerlin2D(&noise_inter_valley_slope->np, x, z, seed);
+ float inter_valley_slope =
+ NoisePerlin2D(&noise_inter_valley_slope->np, x, z, seed);
tn.x = x;
tn.z = z;
@@ -464,7 +433,7 @@ float MapgenValleys::terrainLevelAtPoint(s16 x, s16 z)
tn.valley = &valley;
tn.valley_profile = NoisePerlin2D(&noise_valley_profile->np, x, z, seed);
tn.slope = &inter_valley_slope;
- tn.inter_valley_fill = 0.f;
+ tn.inter_valley_fill = 0.0f;
return adjustedTerrainLevelFromNoise(&tn);
}
@@ -472,14 +441,13 @@ float MapgenValleys::terrainLevelAtPoint(s16 x, s16 z)
int MapgenValleys::generateTerrain()
{
- // Raising this reduces the rate of evaporation.
- static const float evaporation = 300.f;
- // from the lua
- static const float humidity_dropoff = 4.f;
- // constant to convert altitude chill (compatible with lua) to heat
- static const float alt_to_heat = 20.f;
- // humidity reduction by altitude
- static const float alt_to_humid = 10.f;
+ // Raising this reduces the rate of evaporation
+ static const float evaporation = 300.0f;
+ static const float humidity_dropoff = 4.0f;
+ // Constant to convert altitude chill to heat
+ static const float alt_to_heat = 20.0f;
+ // Humidity reduction by altitude
+ static const float alt_to_humid = 10.0f;
MapNode n_air(CONTENT_AIR);
MapNode n_river_water(c_river_water_source);
@@ -505,42 +473,39 @@ int MapgenValleys::generateTerrain()
if (humid_rivers) {
// Derive heat from (base) altitude. This will be most correct
// at rivers, since other surface heights may vary below.
- if (use_altitude_chill && (surface_y > 0.f || river_y > 0.f))
- t_heat -= alt_to_heat * MYMAX(surface_y, river_y) / altitude_chill;
-
- // If humidity is low or heat is high, lower the water table.
- float delta = m_bgen->humidmap[index_2d] - 50.f;
- if (delta < 0.f) {
- float t_evap = (t_heat - 32.f) / evaporation;
- river_y += delta * MYMAX(t_evap, 0.08f);
+ if (use_altitude_chill && (surface_y > 0.0f || river_y > 0.0f))
+ t_heat -= alt_to_heat *
+ std::fmax(surface_y, river_y) / altitude_chill;
+
+ // If humidity is low or heat is high, lower the water table
+ float delta = m_bgen->humidmap[index_2d] - 50.0f;
+ if (delta < 0.0f) {
+ float t_evap = (t_heat - 32.0f) / evaporation;
+ river_y += delta * std::fmax(t_evap, 0.08f);
}
}
u32 index_3d = (z - node_min.Z) * zstride_1u1d + (x - node_min.X);
u32 index_data = vm->m_area.index(x, node_min.Y - 1, z);
- // Mapgens concern themselves with stone and water.
for (s16 y = node_min.Y - 1; y <= node_max.Y + 1; y++) {
if (vm->m_data[index_data].getContent() == CONTENT_IGNORE) {
float fill = noise_inter_valley_fill->result[index_3d];
float surface_delta = (float)y - surface_y;
- bool river = y + 1 < river_y;
+ bool river = y < river_y - 1;
if (slope * fill > surface_delta) {
- // ground
- vm->m_data[index_data] = n_stone;
+ vm->m_data[index_data] = n_stone; // Stone
if (y > heightmap[index_2d])
heightmap[index_2d] = y;
if (y > surface_max_y)
surface_max_y = y;
} else if (y <= water_level) {
- // sea
- vm->m_data[index_data] = n_water;
+ vm->m_data[index_data] = n_water; // Water
} else if (river) {
- // river
- vm->m_data[index_data] = n_river_water;
- } else { // air
- vm->m_data[index_data] = n_air;
+ vm->m_data[index_data] = n_river_water; // River water
+ } else {
+ vm->m_data[index_data] = n_air; // Air
}
}
@@ -550,29 +515,29 @@ int MapgenValleys::generateTerrain()
if (heightmap[index_2d] == -MAX_MAP_GENERATION_LIMIT) {
s16 surface_y_int = myround(surface_y);
- if (surface_y_int > node_max.Y + 1 || surface_y_int < node_min.Y - 1) {
- // If surface_y is outside the chunk, it's good enough.
+
+ if (surface_y_int > node_max.Y + 1 ||
+ surface_y_int < node_min.Y - 1) {
+ // If surface_y is outside the chunk, it's good enough
heightmap[index_2d] = surface_y_int;
} else {
- // If the ground is outside of this chunk, but surface_y
- // is within the chunk, give a value outside.
+ // If the ground is outside of this chunk, but surface_y is
+ // within the chunk, give a value outside.
heightmap[index_2d] = node_min.Y - 2;
}
}
if (humid_rivers) {
- // Use base ground (water table) in a riverbed, to
- // avoid an unnatural rise in humidity.
- float t_alt = MYMAX(noise_rivers->result[index_2d], (float)heightmap[index_2d]);
+ // Use base ground (water table) in a riverbed, to avoid an
+ // unnatural rise in humidity.
+ float t_alt = std::fmax(noise_rivers->result[index_2d],
+ (float)heightmap[index_2d]);
float humid = m_bgen->humidmap[index_2d];
float water_depth = (t_alt - river_y) / humidity_dropoff;
- humid *= 1.f + std::pow(0.5f, MYMAX(water_depth, 1.f));
+ humid *= 1.0f + std::pow(0.5f, std::fmax(water_depth, 1.0f));
- // Reduce humidity with altitude (ignoring riverbeds).
- // This is similar to the lua version's seawater adjustment,
- // but doesn't increase the base humidity, which causes
- // problems with the default biomes.
- if (t_alt > 0.f)
+ // Reduce humidity with altitude (ignoring riverbeds)
+ if (t_alt > 0.0f)
humid -= alt_to_humid * t_alt / altitude_chill;
m_bgen->humidmap[index_2d] = humid;
@@ -581,13 +546,16 @@ int MapgenValleys::generateTerrain()
// Assign the heat adjusted by any changed altitudes.
// The altitude will change about half the time.
if (use_altitude_chill) {
- // ground height ignoring riverbeds
- float t_alt = MYMAX(noise_rivers->result[index_2d], (float)heightmap[index_2d]);
+ // Ground height ignoring riverbeds
+ float t_alt = std::fmax(noise_rivers->result[index_2d],
+ (float)heightmap[index_2d]);
+
if (humid_rivers && heightmap[index_2d] == (s16)myround(surface_y))
- // The altitude hasn't changed. Use the first result.
+ // The altitude hasn't changed. Use the first result
m_bgen->heatmap[index_2d] = t_heat;
- else if (t_alt > 0.f)
- m_bgen->heatmap[index_2d] -= alt_to_heat * t_alt / altitude_chill;
+ else if (t_alt > 0.0f)
+ m_bgen->heatmap[index_2d] -=
+ alt_to_heat * t_alt / altitude_chill;
}
}
diff --git a/src/mapgen/mapgen_valleys.h b/src/mapgen/mapgen_valleys.h
index c4d92239c..f6a486d86 100644
--- a/src/mapgen/mapgen_valleys.h
+++ b/src/mapgen/mapgen_valleys.h
@@ -32,23 +32,19 @@ with this program; if not, write to the Free Software Foundation, Inc.,
#define MGVALLEYS_ALT_CHILL 0x01
#define MGVALLEYS_HUMID_RIVERS 0x02
-// Feed only one variable into these.
+// Feed only one variable into these
#define MYSQUARE(x) (x) * (x)
#define MYCUBE(x) (x) * (x) * (x)
class BiomeManager;
class BiomeGenOriginal;
-// Global profiler
-//class Profiler;
-//extern Profiler *mapgen_profiler;
-
struct MapgenValleysParams : public MapgenParams {
u32 spflags = MGVALLEYS_HUMID_RIVERS | MGVALLEYS_ALT_CHILL;
- u16 altitude_chill = 90; // The altitude at which temperature drops by 20C.
- u16 river_depth = 4; // How deep to carve river channels.
- u16 river_size = 5; // How wide to make rivers.
+ u16 altitude_chill = 90; // The altitude at which temperature drops by 20C
+ u16 river_depth = 4; // How deep to carve river channels
+ u16 river_size = 5; // How wide to make rivers
float cave_width = 0.09f;
s16 large_cave_depth = -33;
@@ -122,9 +118,7 @@ private:
Noise *noise_valley_profile;
float terrainLevelAtPoint(s16 x, s16 z);
-
void calculateNoise();
-
virtual int generateTerrain();
float terrainLevelFromNoise(TerrainNoise *tn);
float adjustedTerrainLevelFromNoise(TerrainNoise *tn);
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 09:53:20 +0000