path: root/advtrains_interlocking/locale/advtrains_interlocking.de.tr

# textdomain: advtrains_interlocking
Prefix set, next signal name will be: @1=
Prefix unset, signals are not auto-named for you!=
Sets the current prefix for automatically naming interlocking components. Example: '/at_nameprefix TEST' - signals will be named TEST1, TEST2 and so on=
Created track section @1 from @2 TCBs=
Track section inconsistent here, repairing...=
Track section partition found, repairing...=
Can set up track sections, routes and signals=
@1 Terminal @2=
@1 is held in @2 position when this route is set and freed =
@1 is no longer affected when this route is set.=
Added track section @1 to the route.=
Advance to next route section=
Advance/Complete Route=
Advancing over next section is=
Cancel if you are unsure!=
Cancel route programming=
Cannot program route without a target=
End of interlocking=
Enter Route Name=
Finish programming route=
Finish route HERE=
Finish route at end of NEXT section=
Fixed in state @1 by route @2 (punch to unfix)=
Fixed in state @1 by route @2 until segment #@3 is freed.=
Insufficient privileges to use this!=
Next section is diverging (>2 TCBs)=
Route discarded.=
Route ends at signal:=
Route leads into=
Route programming mode active. Punch TCBs to add route segments, punch turnouts to lock them.=
Route section @1 removed.=
Routes should in most cases end at signals.=
Save Route=
Step back one section=
Successfully programmed route.=
The origin TCB has become unknown during programming. Try again.=
This TCB is not suitable as=
This TCB is unconfigured, you first need to assign it to a rail=
WARNING: Route does not end at a signal.=
[Route programming] =
impossible at this place.=
non-interlocked area=
route continuation.=
<< Select a route part to edit options=
<Default Aspect>=<Standardbegriff>
ARS Rule List=
Announce distant signal=
Back to signal=
Call-on (section may be occupied)=
Clone Route=
Delete Route=
Error:=
New From Route=
No Signal at this TCB=
Route name=
Route overview=
Save ARS List=
Section Options:=
Set=
Signal Aspect:=Signalbegriff:
TCB at @1 has different section than previous TCB=
TCB at @1 is missing=
TCB at @1 is not assigned to previous track section=
Track section after @1 missing=
Turnout/component missing at @1=
Lock conflict at @1, Held locked by:=
No TCB found at @1. Please update or reconfigure route!=
No track section adjacent to @1. Please reconfigure route!=
Route @1 from signal @2=
Route @1 from signal @2, segment #@3=
Section '@1' already has route set from @2:=
Section '@1' is occupied!=
Section '@1' not found!=
TCB at @1 has different section than previous TCB. Please update track section or reconfigure route!=
Turnout/component missing at @1. Please update track section or reconfigure route!=
<assign distant>=
<none>=
Assigned distant signal to the main signal at @1=
Assigned signal to the TCB at @1=
Clear=
Configuring Signal: Influence point of another signal is already present!=
Configuring Signal: Node is too far away. Aborted.=
Configuring Signal: Please look in train's driving direction and punch rail to set influence point.=
Configuring Signal: Successfully set influence point=
Configuring Signal: This is not a normal two-connection rail! Aborted.=
Dst: @1=
Influence point is not set.=
Influence point is set at @1.=
Modify=
Set distant signal: Punch the main signal to assign!=
Set influence point=
Apply=
Route search: @1 found=
Search further=
Smartroute: No track section directly ahead!=
Smartroute: TCBS or routes don't exist here!=
 (invalid)=
@1 locks in state @2=@1 gesperrt in Position @2
A route is requested from this signal:=Fahrstraße von diesem Signal:
Add locks=Sperre hinzu.
Assign a signal=Signal zuweisen
Automatic Working is active.=Automatischer Blockbetrieb aktiv.
Automatic routesetting=ARS (autom. Fahrstraßenauswahl)
Boundary TCBs:=Gleisabschnittsgrenzen:
Can't remove TCB: Both sides must have no signal assigned!=
Can't remove track, a train is here!=
Cancel=Abbruch
Cancel Route=Fahrstraße auflösen
Cannot delete route which has ARS rules, please review and then delete through edit dialog!=Fahrstraße hat ARS-Regeln, bitte überprüfe diese und lösche die Fahrstraße über den Bearbeitungsdialog!
Clear locks=Sperren freigeben
Configuring TCB: Already existed at this position, it is now linked to this TCB marker=
Configuring TCB: Cannot use static signals for routesetting. Aborted.=
Configuring TCB: Internal error, TCBS doesn't exist. Aborted.=
Configuring TCB: Node is too far away. Aborted.=
Configuring TCB: Not a compatible signal. Aborted.=
Configuring TCB: Please punch the rail you want to assign this TCB to.=
Configuring TCB: Please punch the signal to assign.=
Configuring TCB: Successfully assigned signal.=
Configuring TCB: Successfully configured TCB=
Configuring TCB: This is not a normal two-connection rail! Aborted.=
Create Interlocked Track Section=Gleisabschnitt anlegen
Delete this route=Fahrstraße löschen
Disable Automatic Working=Auto. Blockbetrieb aus
Distant signal triggers ARS=Vorsignal kann ARS auslösen
Edit=Bearbeiten
Enable Automatic Working=Automatischer Blockbetrieb
Error: TS modified, abort!=Fehler: Abschnitt verändert, Abbruch!
Final TCBS unset (legacy-style buffer route)=Letzte Abschnittsgrenze fehlt (Prellbockroute aus älterer Version)
Fixed route locks (e.g. level crossings):=Feste Fahrstraßensperren (z.B. Bahnübergang):
Link @1=Verknüpfe @1
Link: @1=Verknüpfung: @1
Multiple routes are requested (first available is set):=Mehrere Fahrstraßen angefragt (erste verfügbare wird eingestellt):
NOTE: ARS is disabled.=ACHTUNG: ARS deaktiviert!
New (Manual)=Neu (Manuell)
No Link=Keine Verknüpfung
No routes are yet defined.=Bisher keine Fahrstraßen definiert.
No trains on this section.=Keine Züge auf diesem Abschnitt
Punch components to add fixed locks. (punch anything else @= end)=Schlage auf Komponenten um diese zu sperren (schlage irgendetwas anderes @= Ende)
Remove Section=Gleisabschnitt löschen
Reset section state=Gleisabschnitt zurücksetzen
Reset track section=Gleisabschnitt zurücksetzen
Reset track section @1!=Streckenabschnitt @1 zurückgesetzt!
Route has been set.=Fahrstraße ist festgelegt.
Route is re-set when a train passed.=Fahrstraße wird nach Passieren eines Zuges nicht aufgelöst.
Route is set over this signal by:=Eine Fahrstraße ist über dieses Signal gestellt von:
Route is set: =Fahrstraße ist festgelegt: 
Routes are not automatically set.=Fahrstraßen werden nicht automatisch gestellt.
Routes:=Fahrstraßen:
Section holds @1 route locks.=Abschnitt hält @1 Sperren.
Section name=Name des Streckenabschnitts
Set ARS default route=Setze als ARS-Standardroute
Set Route=Fahrstraße einstellen
Setting fixed locks finished!=Feste Fahrstraßensperren hinzugefügt!
Show=Anzeigen
Show track section=Gleisabschnitt anzeigen
Side @1=Seite @1
Signal at @1=Signal bei @1
Signal name=Signalname
Signal on B side already assigned!=Signal auf Seite B bereits zugewiesen!
Signalling=Fahrstraßen stellen
Smart Route=Fahrstraßensuche
TCB Link: Select linked TCB now!=
TCB already existed at this position, now linked to this node=
TCB assigned to @1=
This TCB has been removed. Please dig marker.=
This is a pure distant signal@nNo route is currently set through.=Dies ist ein reines Vorsignal@nAktuell keine Fahrstraße eingestellt.
This is an always-halt signal (e.g. a buffer)@nNo routes can be set from here.=Dies ist ein Haltsignal (z.B. Prellbock)@nVon hier aus können keine Fahrstraßen eingestellt werden.
This will clear the list of trains@nand the routesetting status of this section.@nAre you sure?=
This will remove the track section and set all its end points to End Of Interlocking=
Track Circuit Break=Gleisabschnittsgrenze
Track Circuit Break Configuration=Einstellungen der Gleisabschnittsgrenze
Track Section Detail - @1=
Trains on this section:=
Unconfigured Track Circuit Break, right-click to assign.=
Wait for this route to be cancelled in order to do anything here.=Erst nach Auflösung dieser Fahrstraße kann von hier gestellt werden.
Waiting for route to be set...=Warten, bis Fahrstraße verfügbar ist...
Yes=Ja
You cannot modify track sections when a route is set or a train is on the section.=
Emplace manual lock=Manuelle Sperre setzen
Interlocking tool@nPunch: Highlight track section@nPlace: check route locks/show track section info=
No route locks set=Keine Fahrstraßensperren gehalten
No track section at this location!=Kein Gleisabschnitt gefunden!
Node is not a track!=Block ist kein Gleis!
Route lock inspector=Fahrstraßensperren-Inspektor
Route locks currently put:=Gesetzte Fahrstraßensperren:
Point Speed Restriction Track=Geschwindigkeitskontrollgleis
Point speed restriction: @1=Geschwindigkeitskontrolle: @1
Set point speed restriction:=Setze Kontrollgeschwindigkeit:
You are not allowed to configure this track without the @1 privilege.=Sie dürfen ohne das „@1“-Privileg dieses Gleis nicht konfigurieren.
You are not allowed to configure this track.=Sie dürfen dieses Gleis nicht konfigurieren.