Update minetest.conf.example

1 files changed, 1431 insertions, 1380 deletions

diff --git a/minetest.conf.example b/minetest.conf.example
index 4b4bda0c5..2f153413a 100644
--- a/minetest.conf.example
+++ b/minetest.conf.example
@@ -16,30 +16,13 @@
 # Controls
 #
 
+## General
+
 #    If enabled, you can place blocks at the position (feet + eye level) where you stand.
 #    This is helpful when working with nodeboxes in small areas.
 #    type: bool
 # enable_build_where_you_stand = false
 
-#    Player is able to fly without being affected by gravity.
-#    This requires the "fly" privilege on the server.
-#    type: bool
-# free_move = false
-
-#    If enabled, makes move directions relative to the player's pitch when flying or swimming.
-#    type: bool
-# pitch_move = false
-
-#    Fast movement (via the "Aux1" key).
-#    This requires the "fast" privilege on the server.
-#    type: bool
-# fast_move = false
-
-#    If enabled together with fly mode, player is able to fly through solid nodes.
-#    This requires the "noclip" privilege on the server.
-#    type: bool
-# noclip = false
-
 #    Smooths camera when looking around. Also called look or mouse smoothing.
 #    Useful for recording videos.
 #    type: bool
@@ -53,14 +36,6 @@
 #    type: float min: 0 max: 0.99
 # cinematic_camera_smoothing = 0.7
 
-#    Invert vertical mouse movement.
-#    type: bool
-# invert_mouse = false
-
-#    Mouse sensitivity multiplier.
-#    type: float
-# mouse_sensitivity = 0.2
-
 #    If enabled, "Aux1" key instead of "Sneak" key is used for climbing down and
 #    descending.
 #    type: bool
@@ -77,7 +52,7 @@
 
 #    The time in seconds it takes between repeated node placements when holding
 #    the place button.
-#    type: float min: 0.001
+#    type: float min: 0.25 max: 2
 # repeat_place_time = 0.25
 
 #    Automatically jump up single-node obstacles.
@@ -89,14 +64,17 @@
 #    type: bool
 # safe_dig_and_place = false
 
-#    Enable random user input (only used for testing).
-#    type: bool
-# random_input = false
+## Keyboard and Mouse
 
-#    Continuous forward movement, toggled by autoforward key.
-#    Press the autoforward key again or the backwards movement to disable.
+#    Invert vertical mouse movement.
 #    type: bool
-# continuous_forward = false
+# invert_mouse = false
+
+#    Mouse sensitivity multiplier.
+#    type: float min: 0.001 max: 10
+# mouse_sensitivity = 0.2
+
+## Touchscreen
 
 #    The length in pixels it takes for touch screen interaction to start.
 #    type: int min: 0 max: 100
@@ -112,431 +90,217 @@
 #    type: bool
 # virtual_joystick_triggers_aux1 = false
 
-#    Enable joysticks
-#    type: bool
-# enable_joysticks = false
-
-#    The identifier of the joystick to use
-#    type: int
-# joystick_id = 0
-
-#    The type of joystick
-#    type: enum values: auto, generic, xbox, dragonrise_gamecube
-# joystick_type = auto
-
-#    The time in seconds it takes between repeated events
-#    when holding down a joystick button combination.
-#    type: float min: 0.001
-# repeat_joystick_button_time = 0.17
-
-#    The dead zone of the joystick
-#    type: int
-# joystick_deadzone = 2048
-
-#    The sensitivity of the joystick axes for moving the
-#    in-game view frustum around.
-#    type: float
-# joystick_frustum_sensitivity = 170
-
-#    Key for moving the player forward.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_forward = KEY_KEY_W
-
-#    Key for moving the player backward.
-#    Will also disable autoforward, when active.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_backward = KEY_KEY_S
-
-#    Key for moving the player left.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_left = KEY_KEY_A
-
-#    Key for moving the player right.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_right = KEY_KEY_D
-
-#    Key for jumping.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_jump = KEY_SPACE
-
-#    Key for sneaking.
-#    Also used for climbing down and descending in water if aux1_descends is disabled.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_sneak = KEY_LSHIFT
-
-#    Key for digging.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_dig = KEY_LBUTTON
-
-#    Key for placing.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_place = KEY_RBUTTON
-
-#    Key for opening the inventory.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_inventory = KEY_KEY_I
-
-#    Key for moving fast in fast mode.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_aux1 = KEY_KEY_E
-
-#    Key for opening the chat window.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_chat = KEY_KEY_T
-
-#    Key for opening the chat window to type commands.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_cmd = /
-
-#    Key for opening the chat window to type local commands.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_cmd_local = .
-
-#    Key for toggling unlimited view range.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_rangeselect = KEY_KEY_R
-
-#    Key for toggling flying.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_freemove = KEY_KEY_K
-
-#    Key for toggling pitch move mode.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_pitchmove = KEY_KEY_P
-
-#    Key for toggling fast mode.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_fastmove = KEY_KEY_J
-
-#    Key for toggling noclip mode.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_noclip = KEY_KEY_H
-
-#    Key for selecting the next item in the hotbar.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_hotbar_next = KEY_KEY_N
-
-#    Key for selecting the previous item in the hotbar.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_hotbar_previous = KEY_KEY_B
-
-#    Key for muting the game.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_mute = KEY_KEY_M
-
-#    Key for increasing the volume.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_increase_volume =
-
-#    Key for decreasing the volume.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_decrease_volume =
-
-#    Key for toggling autoforward.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_autoforward =
-
-#    Key for toggling cinematic mode.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_cinematic =
-
-#    Key for toggling display of minimap.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_minimap = KEY_KEY_V
-
-#    Key for taking screenshots.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_screenshot = KEY_F12
-
-#    Key for dropping the currently selected item.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_drop = KEY_KEY_Q
-
-#    Key to use view zoom when possible.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_zoom = KEY_KEY_Z
-
-#    Key for selecting the first hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot1 = KEY_KEY_1
-
-#    Key for selecting the second hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot2 = KEY_KEY_2
+#
+# Graphics and Audio
+#
 
-#    Key for selecting the third hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot3 = KEY_KEY_3
+## Graphics
 
-#    Key for selecting the fourth hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot4 = KEY_KEY_4
+### Screen
 
-#    Key for selecting the fifth hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot5 = KEY_KEY_5
+#    Width component of the initial window size. Ignored in fullscreen mode.
+#    type: int min: 1 max: 65535
+# screen_w = 1024
 
-#    Key for selecting the sixth hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot6 = KEY_KEY_6
+#    Height component of the initial window size. Ignored in fullscreen mode.
+#    type: int min: 1 max: 65535
+# screen_h = 600
 
-#    Key for selecting the seventh hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot7 = KEY_KEY_7
+#    Save window size automatically when modified.
+#    type: bool
+# autosave_screensize = true
 
-#    Key for selecting the eighth hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot8 = KEY_KEY_8
+#    Fullscreen mode.
+#    type: bool
+# fullscreen = false
 
-#    Key for selecting the ninth hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot9 = KEY_KEY_9
+#    Open the pause menu when the window's focus is lost. Does not pause if a formspec is
+#    open.
+#    type: bool
+# pause_on_lost_focus = false
 
-#    Key for selecting the tenth hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot10 = KEY_KEY_0
+### FPS
 
-#    Key for selecting the 11th hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot11 =
+#    If FPS would go higher than this, limit it by sleeping
+#    to not waste CPU power for no benefit.
+#    type: int min: 1 max: 4294967295
+# fps_max = 60
 
-#    Key for selecting the 12th hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot12 =
+#    Vertical screen synchronization.
+#    type: bool
+# vsync = false
 
-#    Key for selecting the 13th hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot13 =
+#    Maximum FPS when the window is not focused, or when the game is paused.
+#    type: int min: 1 max: 4294967295
+# fps_max_unfocused = 20
 
-#    Key for selecting the 14th hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot14 =
+#    View distance in nodes.
+#    type: int min: 20 max: 4000
+# viewing_range = 190
 
-#    Key for selecting the 15th hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot15 =
+#    Undersampling is similar to using a lower screen resolution, but it applies
+#    to the game world only, keeping the GUI intact.
+#    It should give a significant performance boost at the cost of less detailed image.
+#    Higher values result in a less detailed image.
+#    type: int min: 1 max: 8
+# undersampling = 1
 
-#    Key for selecting the 16th hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot16 =
+### Graphics Effects
 
-#    Key for selecting the 17th hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot17 =
-
-#    Key for selecting the 18th hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot18 =
+#    Makes all liquids opaque
+#    type: bool
+# opaque_water = false
 
-#    Key for selecting the 19th hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot19 =
+#    Leaves style:
+#    -   Fancy:  all faces visible
+#    -   Simple: only outer faces, if defined special_tiles are used
+#    -   Opaque: disable transparency
+#    type: enum values: fancy, simple, opaque
+# leaves_style = fancy
 
-#    Key for selecting the 20th hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot20 =
+#    Connects glass if supported by node.
+#    type: bool
+# connected_glass = false
 
-#    Key for selecting the 21st hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot21 =
+#    Enable smooth lighting with simple ambient occlusion.
+#    Disable for speed or for different looks.
+#    type: bool
+# smooth_lighting = true
 
-#    Key for selecting the 22nd hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot22 =
+#    Enables tradeoffs that reduce CPU load or increase rendering performance
+#    at the expense of minor visual glitches that do not impact game playability.
+#    type: bool
+# performance_tradeoffs = false
 
-#    Key for selecting the 23rd hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot23 =
+#    Adds particles when digging a node.
+#    type: bool
+# enable_particles = true
 
-#    Key for selecting the 24th hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot24 =
+### 3d
 
-#    Key for selecting the 25th hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot25 =
+#    3D support.
+#    Currently supported:
+#    -    none: no 3d output.
+#    -    anaglyph: cyan/magenta color 3d.
+#    -    interlaced: odd/even line based polarisation screen support.
+#    -    topbottom: split screen top/bottom.
+#    -    sidebyside: split screen side by side.
+#    -    crossview: Cross-eyed 3d
+#    -    pageflip: quadbuffer based 3d.
+#    Note that the interlaced mode requires shaders to be enabled.
+#    type: enum values: none, anaglyph, interlaced, topbottom, sidebyside, crossview, pageflip
+# 3d_mode = none
 
-#    Key for selecting the 26th hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot26 =
+#    Strength of 3D mode parallax.
+#    type: float min: -0.087 max: 0.087
+# 3d_paralax_strength = 0.025
 
-#    Key for selecting the 27th hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot27 =
+### Bobbing
 
-#    Key for selecting the 28th hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot28 =
+#    Arm inertia, gives a more realistic movement of
+#    the arm when the camera moves.
+#    type: bool
+# arm_inertia = true
 
-#    Key for selecting the 29th hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot29 =
+#    Enable view bobbing and amount of view bobbing.
+#    For example: 0 for no view bobbing; 1.0 for normal; 2.0 for double.
+#    type: float min: 0 max: 7.9
+# view_bobbing_amount = 1.0
 
-#    Key for selecting the 30th hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot30 =
+#    Multiplier for fall bobbing.
+#    For example: 0 for no view bobbing; 1.0 for normal; 2.0 for double.
+#    type: float min: 0 max: 100
+# fall_bobbing_amount = 0.03
 
-#    Key for selecting the 31st hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot31 =
+### Camera
 
-#    Key for selecting the 32nd hotbar slot.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_slot32 =
+#    Camera 'near clipping plane' distance in nodes, between 0 and 0.25
+#    Only works on GLES platforms. Most users will not need to change this.
+#    Increasing can reduce artifacting on weaker GPUs.
+#    0.1 = Default, 0.25 = Good value for weaker tablets.
+#    type: float min: 0 max: 0.25
+# near_plane = 0.1
 
-#    Key for toggling the display of the HUD.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_toggle_hud = KEY_F1
+#    Field of view in degrees.
+#    type: int min: 45 max: 160
+# fov = 72
 
-#    Key for toggling the display of chat.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_toggle_chat = KEY_F2
+#    Alters the light curve by applying 'gamma correction' to it.
+#    Higher values make middle and lower light levels brighter.
+#    Value '1.0' leaves the light curve unaltered.
+#    This only has significant effect on daylight and artificial
+#    light, it has very little effect on natural night light.
+#    type: float min: 0.33 max: 3
+# display_gamma = 1.0
 
-#    Key for toggling the display of the large chat console.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_console = KEY_F10
+#    The strength (darkness) of node ambient-occlusion shading.
+#    Lower is darker, Higher is lighter. The valid range of values for this
+#    setting is 0.25 to 4.0 inclusive. If the value is out of range it will be
+#    set to the nearest valid value.
+#    type: float min: 0.25 max: 4
+# ambient_occlusion_gamma = 2.2
 
-#    Key for toggling the display of fog.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_toggle_force_fog_off = KEY_F3
+### Screenshots
 
-#    Key for toggling the camera update. Only used for development
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_toggle_update_camera =
+#    Path to save screenshots at. Can be an absolute or relative path.
+#    The folder will be created if it doesn't already exist.
+#    type: path
+# screenshot_path = screenshots
 
-#    Key for toggling the display of debug info.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_toggle_debug = KEY_F5
+#    Format of screenshots.
+#    type: enum values: png, jpg
+# screenshot_format = png
 
-#    Key for toggling the display of the profiler. Used for development.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_toggle_profiler = KEY_F6
+#    Screenshot quality. Only used for JPEG format.
+#    1 means worst quality; 100 means best quality.
+#    Use 0 for default quality.
+#    type: int min: 0 max: 100
+# screenshot_quality = 0
 
-#    Key for switching between first- and third-person camera.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_camera_mode = KEY_KEY_C
+### Node and Entity Highlighting
 
-#    Key for increasing the viewing range.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_increase_viewing_range_min = +
+#    Method used to highlight selected object.
+#    type: enum values: box, halo, none
+# node_highlighting = box
 
-#    Key for decreasing the viewing range.
-#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-#    type: key
-# keymap_decrease_viewing_range_min = -
+#    Show entity selection boxes
+#    A restart is required after changing this.
+#    type: bool
+# show_entity_selectionbox = false
 
-#
-# Graphics
-#
+#    Selection box border color (R,G,B).
+#    type: string
+# selectionbox_color = (0,0,0)
 
-## In-Game
+#    Width of the selection box lines around nodes.
+#    type: int min: 1 max: 5
+# selectionbox_width = 2
 
-### Basic
+#    Crosshair color (R,G,B).
+#    Also controls the object crosshair color
+#    type: string
+# crosshair_color = (255,255,255)
 
-#    Whether name tag backgrounds should be shown by default.
-#    Mods may still set a background.
-#    type: bool
-# show_nametag_backgrounds = true
+#    Crosshair alpha (opaqueness, between 0 and 255).
+#    This also applies to the object crosshair.
+#    type: int min: 0 max: 255
+# crosshair_alpha = 255
 
-#    Enable vertex buffer objects.
-#    This should greatly improve graphics performance.
-#    type: bool
-# enable_vbo = true
+### Fog
 
 #    Whether to fog out the end of the visible area.
 #    type: bool
 # enable_fog = true
 
-#    Leaves style:
-#    -   Fancy:  all faces visible
-#    -   Simple: only outer faces, if defined special_tiles are used
-#    -   Opaque: disable transparency
-#    type: enum values: fancy, simple, opaque
-# leaves_style = fancy
-
-#    Connects glass if supported by node.
+#    Make fog and sky colors depend on daytime (dawn/sunset) and view direction.
 #    type: bool
-# connected_glass = false
+# directional_colored_fog = true
 
-#    Enable smooth lighting with simple ambient occlusion.
-#    Disable for speed or for different looks.
-#    type: bool
-# smooth_lighting = true
+#    Fraction of the visible distance at which fog starts to be rendered
+#    type: float min: 0 max: 0.99
+# fog_start = 0.4
 
-#    Enables tradeoffs that reduce CPU load or increase rendering performance
-#    at the expense of minor visual glitches that do not impact game playability.
-#    type: bool
-# performance_tradeoffs = false
+### Clouds
 
 #    Clouds are a client side effect.
 #    type: bool
@@ -546,15 +310,7 @@
 #    type: bool
 # enable_3d_clouds = true
 
-#    Method used to highlight selected object.
-#    type: enum values: box, halo, none
-# node_highlighting = box
-
-#    Adds particles when digging a node.
-#    type: bool
-# enable_particles = true
-
-### Filtering
+### Filtering and Antialiasing
 
 #    Use mipmapping to scale textures. May slightly increase performance,
 #    especially when using a high resolution texture pack.
@@ -589,7 +345,7 @@
 #    bilinear/trilinear/anisotropic filtering is enabled.
 #    This is also used as the base node texture size for world-aligned
 #    texture autoscaling.
-#    type: int
+#    type: int min: 1 max: 32768
 # texture_min_size = 64
 
 #    Use multi-sample antialiasing (MSAA) to smooth out block edges.
@@ -602,14 +358,7 @@
 #    type: enum values: 0, 1, 2, 4, 8, 16
 # fsaa = 0
 
-#    Undersampling is similar to using a lower screen resolution, but it applies
-#    to the game world only, keeping the GUI intact.
-#    It should give a significant performance boost at the cost of less detailed image.
-#    Higher values result in a less detailed image.
-#    type: int min: 1 max: 8
-# undersampling = 1
-
-### Shaders
+## Shaders
 
 #    Shaders allow advanced visual effects and may increase performance on some video
 #    cards.
@@ -617,11 +366,7 @@
 #    type: bool
 # enable_shaders = true
 
-#    Path to shader directory. If no path is defined, default location will be used.
-#    type: path
-# shader_path =
-
-#### Tone Mapping
+### Tone Mapping
 
 #    Enables Hable's 'Uncharted 2' filmic tone mapping.
 #    Simulates the tone curve of photographic film and how this approximates the
@@ -630,7 +375,17 @@
 #    type: bool
 # tone_mapping = false
 
-#### Waving Nodes
+### Waving Nodes
+
+#    Set to true to enable waving leaves.
+#    Requires shaders to be enabled.
+#    type: bool
+# enable_waving_leaves = false
+
+#    Set to true to enable waving plants.
+#    Requires shaders to be enabled.
+#    type: bool
+# enable_waving_plants = false
 
 #    Set to true to enable waving liquids (like water).
 #    Requires shaders to be enabled.
@@ -656,17 +411,7 @@
 #    type: float
 # water_wave_speed = 5.0
 
-#    Set to true to enable waving leaves.
-#    Requires shaders to be enabled.
-#    type: bool
-# enable_waving_leaves = false
-
-#    Set to true to enable waving plants.
-#    Requires shaders to be enabled.
-#    type: bool
-# enable_waving_plants = false
-
-#### Dynamic shadows
+### Dynamic shadows
 
 #    Set to true to enable Shadow Mapping.
 #    Requires shaders to be enabled.
@@ -720,9 +465,9 @@
 
 #    Set the soft shadow radius size.
 #    Lower values mean sharper shadows, bigger values mean softer shadows.
-#    Minimum value: 1.0; maximum value: 10.0
-#    type: float min: 1 max: 10
-# shadow_soft_radius = 1.0
+#    Minimum value: 1.0; maximum value: 15.0
+#    type: float min: 1 max: 15
+# shadow_soft_radius = 5.0
 
 #    Set the tilt of Sun/Moon orbit in degrees.
 #    Value of 0 means no tilt / vertical orbit.
@@ -730,152 +475,40 @@
 #    type: float min: 0 max: 60
 # shadow_sky_body_orbit_tilt = 0.0
 
-### Advanced
-
-#    Arm inertia, gives a more realistic movement of
-#    the arm when the camera moves.
-#    type: bool
-# arm_inertia = true
-
-#    If FPS would go higher than this, limit it by sleeping
-#    to not waste CPU power for no benefit.
-#    type: int min: 1
-# fps_max = 60
-
-#    Maximum FPS when the window is not focused, or when the game is paused.
-#    type: int min: 1
-# fps_max_unfocused = 20
-
-#    Open the pause menu when the window's focus is lost. Does not pause if a formspec is
-#    open.
-#    type: bool
-# pause_on_lost_focus = false
-
-#    View distance in nodes.
-#    type: int min: 20 max: 4000
-# viewing_range = 190
-
-#    Camera 'near clipping plane' distance in nodes, between 0 and 0.25
-#    Only works on GLES platforms. Most users will not need to change this.
-#    Increasing can reduce artifacting on weaker GPUs.
-#    0.1 = Default, 0.25 = Good value for weaker tablets.
-#    type: float min: 0 max: 0.25
-# near_plane = 0.1
-
-#    Width component of the initial window size. Ignored in fullscreen mode.
-#    type: int min: 1
-# screen_w = 1024
-
-#    Height component of the initial window size. Ignored in fullscreen mode.
-#    type: int min: 1
-# screen_h = 600
-
-#    Save window size automatically when modified.
-#    type: bool
-# autosave_screensize = true
-
-#    Fullscreen mode.
-#    type: bool
-# fullscreen = false
-
-#    Vertical screen synchronization.
-#    type: bool
-# vsync = false
-
-#    Field of view in degrees.
-#    type: int min: 45 max: 160
-# fov = 72
-
-#    Alters the light curve by applying 'gamma correction' to it.
-#    Higher values make middle and lower light levels brighter.
-#    Value '1.0' leaves the light curve unaltered.
-#    This only has significant effect on daylight and artificial
-#    light, it has very little effect on natural night light.
-#    type: float min: 0.33 max: 3
-# display_gamma = 1.0
-
-#    Gradient of light curve at minimum light level.
-#    Controls the contrast of the lowest light levels.
-#    type: float min: 0 max: 3
-# lighting_alpha = 0.0
-
-#    Gradient of light curve at maximum light level.
-#    Controls the contrast of the highest light levels.
-#    type: float min: 0 max: 3
-# lighting_beta = 1.5
-
-#    Strength of light curve boost.
-#    The 3 'boost' parameters define a range of the light
-#    curve that is boosted in brightness.
-#    type: float min: 0 max: 0.4
-# lighting_boost = 0.2
+## Audio
 
-#    Center of light curve boost range.
-#    Where 0.0 is minimum light level, 1.0 is maximum light level.
+#    Volume of all sounds.
+#    Requires the sound system to be enabled.
 #    type: float min: 0 max: 1
-# lighting_boost_center = 0.5
+# sound_volume = 0.7
 
-#    Spread of light curve boost range.
-#    Controls the width of the range to be boosted.
-#    Standard deviation of the light curve boost Gaussian.
-#    type: float min: 0 max: 0.4
-# lighting_boost_spread = 0.2
+#    Whether to mute sounds. You can unmute sounds at any time, unless the
+#    sound system is disabled (enable_sound=false).
+#    In-game, you can toggle the mute state with the mute key or by using the
+#    pause menu.
+#    type: bool
+# mute_sound = false
 
-#    Path to texture directory. All textures are first searched from here.
-#    type: path
-# texture_path =
+## User Interfaces
 
-#    The rendering back-end.
+#    Set the language. Leave empty to use the system language.
 #    A restart is required after changing this.
-#    Note: On Android, stick with OGLES1 if unsure! App may fail to start otherwise.
-#    On other platforms, OpenGL is recommended.
-#    Shaders are supported by OpenGL (desktop only) and OGLES2 (experimental)
-#    type: enum values: opengl, ogles1, ogles2
-# video_driver = opengl
-
-#    Radius of cloud area stated in number of 64 node cloud squares.
-#    Values larger than 26 will start to produce sharp cutoffs at cloud area corners.
-#    type: int
-# cloud_radius = 12
-
-#    Enable view bobbing and amount of view bobbing.
-#    For example: 0 for no view bobbing; 1.0 for normal; 2.0 for double.
-#    type: float
-# view_bobbing_amount = 1.0
-
-#    Multiplier for fall bobbing.
-#    For example: 0 for no view bobbing; 1.0 for normal; 2.0 for double.
-#    type: float
-# fall_bobbing_amount = 0.03
-
-#    3D support.
-#    Currently supported:
-#    -    none: no 3d output.
-#    -    anaglyph: cyan/magenta color 3d.
-#    -    interlaced: odd/even line based polarisation screen support.
-#    -    topbottom: split screen top/bottom.
-#    -    sidebyside: split screen side by side.
-#    -    crossview: Cross-eyed 3d
-#    -    pageflip: quadbuffer based 3d.
-#    Note that the interlaced mode requires shaders to be enabled.
-#    type: enum values: none, anaglyph, interlaced, topbottom, sidebyside, crossview, pageflip
-# 3d_mode = none
-
-#    Strength of 3D mode parallax.
-#    type: float
-# 3d_paralax_strength = 0.025
+#    type: enum values: , be, bg, ca, cs, da, de, el, en, eo, es, et, eu, fi, fr, gd, gl, hu, id, it, ja, jbo, kk, ko, lt, lv, ms, nb, nl, nn, pl, pt, pt_BR, ro, ru, sk, sl, sr_Cyrl, sr_Latn, sv, sw, tr, uk, vi, zh_CN, zh_TW
+# language =
 
-#    In-game chat console height, between 0.1 (10%) and 1.0 (100%).
-#    type: float min: 0.1 max: 1
-# console_height = 0.6
+### GUIs
 
-#    In-game chat console background color (R,G,B).
-#    type: string
-# console_color = (0,0,0)
+#    Scale GUI by a user specified value.
+#    Use a nearest-neighbor-anti-alias filter to scale the GUI.
+#    This will smooth over some of the rough edges, and blend
+#    pixels when scaling down, at the cost of blurring some
+#    edge pixels when images are scaled by non-integer sizes.
+#    type: float min: 0.5 max: 20
+# gui_scaling = 1.0
 
-#    In-game chat console background alpha (opaqueness, between 0 and 255).
-#    type: int min: 0 max: 255
-# console_alpha = 200
+#    Enables animation of inventory items.
+#    type: bool
+# inventory_items_animations = false
 
 #    Formspec full-screen background opacity (between 0 and 255).
 #    type: int min: 0 max: 255
@@ -885,143 +518,6 @@
 #    type: string
 # formspec_fullscreen_bg_color = (0,0,0)
 
-#    Formspec default background opacity (between 0 and 255).
-#    type: int min: 0 max: 255
-# formspec_default_bg_opacity = 140
-
-#    Formspec default background color (R,G,B).
-#    type: string
-# formspec_default_bg_color = (0,0,0)
-
-#    Selection box border color (R,G,B).
-#    type: string
-# selectionbox_color = (0,0,0)
-
-#    Width of the selection box lines around nodes.
-#    type: int min: 1 max: 5
-# selectionbox_width = 2
-
-#    Crosshair color (R,G,B).
-#    Also controls the object crosshair color
-#    type: string
-# crosshair_color = (255,255,255)
-
-#    Crosshair alpha (opaqueness, between 0 and 255).
-#    This also applies to the object crosshair.
-#    type: int min: 0 max: 255
-# crosshair_alpha = 255
-
-#    Maximum number of recent chat messages to show
-#    type: int min: 2 max: 20
-# recent_chat_messages = 6
-
-#    Whether node texture animations should be desynchronized per mapblock.
-#    type: bool
-# desynchronize_mapblock_texture_animation = true
-
-#    Maximum proportion of current window to be used for hotbar.
-#    Useful if there's something to be displayed right or left of hotbar.
-#    type: float
-# hud_hotbar_max_width = 1.0
-
-#    Modifies the size of the HUD elements.
-#    type: float
-# hud_scaling = 1.0
-
-#    Enables caching of facedir rotated meshes.
-#    type: bool
-# enable_mesh_cache = false
-
-#    Delay between mesh updates on the client in ms. Increasing this will slow
-#    down the rate of mesh updates, thus reducing jitter on slower clients.
-#    type: int min: 0 max: 50
-# mesh_generation_interval = 0
-
-#    Size of the MapBlock cache of the mesh generator. Increasing this will
-#    increase the cache hit %, reducing the data being copied from the main
-#    thread, thus reducing jitter.
-#    type: int min: 0 max: 1000
-# meshgen_block_cache_size = 20
-
-#    Enables minimap.
-#    type: bool
-# enable_minimap = true
-
-#    Shape of the minimap. Enabled = round, disabled = square.
-#    type: bool
-# minimap_shape_round = true
-
-#    True = 256
-#    False = 128
-#    Usable to make minimap smoother on slower machines.
-#    type: bool
-# minimap_double_scan_height = true
-
-#    Make fog and sky colors depend on daytime (dawn/sunset) and view direction.
-#    type: bool
-# directional_colored_fog = true
-
-#    The strength (darkness) of node ambient-occlusion shading.
-#    Lower is darker, Higher is lighter. The valid range of values for this
-#    setting is 0.25 to 4.0 inclusive. If the value is out of range it will be
-#    set to the nearest valid value.
-#    type: float min: 0.25 max: 4
-# ambient_occlusion_gamma = 2.2
-
-#    Enables animation of inventory items.
-#    type: bool
-# inventory_items_animations = false
-
-#    Fraction of the visible distance at which fog starts to be rendered
-#    type: float min: 0 max: 0.99
-# fog_start = 0.4
-
-#    Makes all liquids opaque
-#    type: bool
-# opaque_water = false
-
-#    Textures on a node may be aligned either to the node or to the world.
-#    The former mode suits better things like machines, furniture, etc., while
-#    the latter makes stairs and microblocks fit surroundings better.
-#    However, as this possibility is new, thus may not be used by older servers,
-#    this option allows enforcing it for certain node types. Note though that
-#    that is considered EXPERIMENTAL and may not work properly.
-#    type: enum values: disable, enable, force_solid, force_nodebox
-# world_aligned_mode = enable
-
-#    World-aligned textures may be scaled to span several nodes. However,
-#    the server may not send the scale you want, especially if you use
-#    a specially-designed texture pack; with this option, the client tries
-#    to determine the scale automatically basing on the texture size.
-#    See also texture_min_size.
-#    Warning: This option is EXPERIMENTAL!
-#    type: enum values: disable, enable, force
-# autoscale_mode = disable
-
-#    Show entity selection boxes
-#    A restart is required after changing this.
-#    type: bool
-# show_entity_selectionbox = false
-
-#    Distance in nodes at which transparency depth sorting is enabled
-#    Use this to limit the performance impact of transparency depth sorting
-#    type: int min: 0 max: 128
-# transparency_sorting_distance = 16
-
-## Menus
-
-#    Use a cloud animation for the main menu background.
-#    type: bool
-# menu_clouds = true
-
-#    Scale GUI by a user specified value.
-#    Use a nearest-neighbor-anti-alias filter to scale the GUI.
-#    This will smooth over some of the rough edges, and blend
-#    pixels when scaling down, at the cost of blurring some
-#    edge pixels when images are scaled by non-integer sizes.
-#    type: float min: 0.001
-# gui_scaling = 1.0
-
 #    When gui_scaling_filter is true, all GUI images need to be
 #    filtered in software, but some images are generated directly
 #    to hardware (e.g. render-to-texture for nodes in inventory).
@@ -1036,224 +532,112 @@
 # gui_scaling_filter_txr2img = true
 
 #    Delay showing tooltips, stated in milliseconds.
-#    type: int
+#    type: int min: 0 max: 1.844674407371e+19
 # tooltip_show_delay = 400
 
 #    Append item name to tooltip.
 #    type: bool
 # tooltip_append_itemname = false
 
+#    Use a cloud animation for the main menu background.
 #    type: bool
-# font_bold = false
-
-#    type: bool
-# font_italic = false
-
-#    Shadow offset (in pixels) of the default font. If 0, then shadow will not be drawn.
-#    type: int
-# font_shadow = 1
-
-#    Opaqueness (alpha) of the shadow behind the default font, between 0 and 255.
-#    type: int min: 0 max: 255
-# font_shadow_alpha = 127
-
-#    Font size of the default font where 1 unit = 1 pixel at 96 DPI
-#    type: int min: 1
-# font_size = 16
-
-#    For pixel-style fonts that do not scale well, this ensures that font sizes used
-#    with this font will always be divisible by this value, in pixels. For instance,
-#    a pixel font 16 pixels tall should have this set to 16, so it will only ever be
-#    sized 16, 32, 48, etc., so a mod requesting a size of 25 will get 32.
-#    type: int min: 1
-# font_size_divisible_by = 1
+# menu_clouds = true
 
-#    Path to the default font. Must be a TrueType font.
-#    The fallback font will be used if the font cannot be loaded.
-#    type: filepath
-# font_path = fonts/Arimo-Regular.ttf
+### HUD
 
-#    type: filepath
-# font_path_bold = fonts/Arimo-Bold.ttf
+#    Modifies the size of the HUD elements.
+#    type: float min: 0.5 max: 20
+# hud_scaling = 1.0
 
-#    type: filepath
-# font_path_italic = fonts/Arimo-Italic.ttf
+#    Whether name tag backgrounds should be shown by default.
+#    Mods may still set a background.
+#    type: bool
+# show_nametag_backgrounds = true
 
-#    type: filepath
-# font_path_bold_italic = fonts/Arimo-BoldItalic.ttf
+### Chat
 
-#    Font size of the monospace font where 1 unit = 1 pixel at 96 DPI
-#    type: int min: 1
-# mono_font_size = 16
+#    Maximum number of recent chat messages to show
+#    type: int min: 2 max: 20
+# recent_chat_messages = 6
 
-#    For pixel-style fonts that do not scale well, this ensures that font sizes used
-#    with this font will always be divisible by this value, in pixels. For instance,
-#    a pixel font 16 pixels tall should have this set to 16, so it will only ever be
-#    sized 16, 32, 48, etc., so a mod requesting a size of 25 will get 32.
-#    type: int min: 1
-# mono_font_size_divisible_by = 1
+#    In-game chat console height, between 0.1 (10%) and 1.0 (100%).
+#    type: float min: 0.1 max: 1
+# console_height = 0.6
 
-#    Path to the monospace font. Must be a TrueType font.
-#    This font is used for e.g. the console and profiler screen.
-#    type: filepath
-# mono_font_path = fonts/Cousine-Regular.ttf
+#    In-game chat console background color (R,G,B).
+#    type: string
+# console_color = (0,0,0)
 
-#    type: filepath
-# mono_font_path_bold = fonts/Cousine-Bold.ttf
+#    In-game chat console background alpha (opaqueness, between 0 and 255).
+#    type: int min: 0 max: 255
+# console_alpha = 200
 
-#    type: filepath
-# mono_font_path_italic = fonts/Cousine-Italic.ttf
+#    Maximum proportion of current window to be used for hotbar.
+#    Useful if there's something to be displayed right or left of hotbar.
+#    type: float min: 0.001 max: 1
+# hud_hotbar_max_width = 1.0
 
-#    type: filepath
-# mono_font_path_bold_italic = fonts/Cousine-BoldItalic.ttf
+#    Clickable weblinks (middle-click or Ctrl+left-click) enabled in chat console output.
+#    type: bool
+# clickable_chat_weblinks = true
 
-#    Path of the fallback font. Must be a TrueType font.
-#    This font will be used for certain languages or if the default font is unavailable.
-#    type: filepath
-# fallback_font_path = fonts/DroidSansFallbackFull.ttf
+#    Optional override for chat weblink color.
+#    type: string
+# chat_weblink_color =
 
 #    Font size of the recent chat text and chat prompt in point (pt).
 #    Value 0 will use the default font size.
-#    type: int
+#    type: int min: 0 max: 72
 # chat_font_size = 0
 
-#    Path to save screenshots at. Can be an absolute or relative path.
-#    The folder will be created if it doesn't already exist.
-#    type: path
-# screenshot_path = screenshots
+### Content Repository
 
-#    Format of screenshots.
-#    type: enum values: png, jpg
-# screenshot_format = png
-
-#    Screenshot quality. Only used for JPEG format.
-#    1 means worst quality; 100 means best quality.
-#    Use 0 for default quality.
-#    type: int min: 0 max: 100
-# screenshot_quality = 0
+#    The URL for the content repository
+#    type: string
+# contentdb_url = https://content.minetest.net
 
-## Advanced
+#    Comma-separated list of flags to hide in the content repository.
+#    "nonfree" can be used to hide packages which do not qualify as 'free software',
+#    as defined by the Free Software Foundation.
+#    You can also specify content ratings.
+#    These flags are independent from Minetest versions,
+#    so see a full list at https://content.minetest.net/help/content_flags/
+#    type: string
+# contentdb_flag_blacklist = nonfree, desktop_default
 
-#    Adjust dpi configuration to your screen (non X11/Android only) e.g. for 4k screens.
+#    Maximum number of concurrent downloads. Downloads exceeding this limit will be queued.
+#    This should be lower than curl_parallel_limit.
 #    type: int min: 1
-# screen_dpi = 72
-
-#    Adjust the detected display density, used for scaling UI elements.
-#    type: float
-# display_density_factor = 1
-
-#    Windows systems only: Start Minetest with the command line window in the background.
-#    Contains the same information as the file debug.txt (default name).
-#    type: bool
-# enable_console = false
-
-#
-# Sound
-#
-
-#    Enables the sound system.
-#    If disabled, this completely disables all sounds everywhere and the in-game
-#    sound controls will be non-functional.
-#    Changing this setting requires a restart.
-#    type: bool
-# enable_sound = true
-
-#    Volume of all sounds.
-#    Requires the sound system to be enabled.
-#    type: float min: 0 max: 1
-# sound_volume = 0.7
-
-#    Whether to mute sounds. You can unmute sounds at any time, unless the
-#    sound system is disabled (enable_sound=false).
-#    In-game, you can toggle the mute state with the mute key or by using the
-#    pause menu.
-#    type: bool
-# mute_sound = false
+# contentdb_max_concurrent_downloads = 3
 
 #
-# Client
+# Client and Server
 #
 
-#    Clickable weblinks (middle-click or Ctrl+left-click) enabled in chat console output.
-#    type: bool
-# clickable_chat_weblinks = true
-
-#    Optional override for chat weblink color.
-#    type: string
-# chat_weblink_color =
-
-## Network
-
-#    Address to connect to.
-#    Leave this blank to start a local server.
-#    Note that the address field in the main menu overrides this setting.
-#    type: string
-# address =
-
-#    Port to connect to (UDP).
-#    Note that the port field in the main menu overrides this setting.
-#    type: int min: 1 max: 65535
-# remote_port = 30000
-
-#    Prometheus listener address.
-#    If Minetest is compiled with ENABLE_PROMETHEUS option enabled,
-#    enable metrics listener for Prometheus on that address.
-#    Metrics can be fetched on http://127.0.0.1:30000/metrics
-#    type: string
-# prometheus_listener_address = 127.0.0.1:30000
+## Client
 
 #    Save the map received by the client on disk.
 #    type: bool
 # enable_local_map_saving = false
 
-#    Enable usage of remote media server (if provided by server).
-#    Remote servers offer a significantly faster way to download media (e.g. textures)
-#    when connecting to the server.
-#    type: bool
-# enable_remote_media_server = true
-
-#    Enable Lua modding support on client.
-#    This support is experimental and API can change.
-#    type: bool
-# enable_client_modding = false
-
 #    URL to the server list displayed in the Multiplayer Tab.
 #    type: string
 # serverlist_url = servers.minetest.net
 
-#    File in client/serverlist/ that contains your favorite servers displayed in the
-#    Multiplayer Tab.
-#    type: string
-# serverlist_file = favoriteservers.json
-
-#    Maximum size of the out chat queue.
-#    0 to disable queueing and -1 to make the queue size unlimited.
-#    type: int
-# max_out_chat_queue_size = 20
-
-#    Enable register confirmation when connecting to server.
-#    If disabled, new account will be registered automatically.
+#    If enabled, account registration is separate from login in the UI.
+#    If disabled, new accounts will be registered automatically when logging in.
 #    type: bool
-# enable_register_confirmation = true
+# enable_split_login_register = true
 
-## Advanced
-
-#    Timeout for client to remove unused map data from memory.
-#    type: int
-# client_unload_unused_data_timeout = 600
-
-#    Maximum number of mapblocks for client to be kept in memory.
-#    Set to -1 for unlimited amount.
-#    type: int
-# client_mapblock_limit = 7500
+## Server
 
-#    Whether to show the client debug info (has the same effect as hitting F5).
-#    type: bool
-# show_debug = false
+#    Name of the player.
+#    When running a server, clients connecting with this name are admins.
+#    When starting from the main menu, this is overridden.
+#    type: string
+# name =
 
-#
-# Server / Singleplayer
-#
+### Serverlist and MOTD
 
 #    Name of the server, to be displayed when players join and in the serverlist.
 #    type: string
@@ -1279,16 +663,23 @@
 #    type: string
 # serverlist_url = servers.minetest.net
 
-#    Remove color codes from incoming chat messages
-#    Use this to stop players from being able to use color in their messages
-#    type: bool
-# strip_color_codes = false
+#    Message of the day displayed to players connecting.
+#    type: string
+# motd =
+
+#    Maximum number of players that can be connected simultaneously.
+#    type: int min: 0 max: 65535
+# max_users = 15
+
+#    If this is set, players will always (re)spawn at the given position.
+#    type: string
+# static_spawnpoint =
 
-## Network
+### Networking
 
 #    Network port to listen (UDP).
 #    This value will be overridden when starting from the main menu.
-#    type: int
+#    type: int min: 1 max: 65535
 # port = 30000
 
 #    The network interface that the server listens on.
@@ -1314,79 +705,16 @@
 #    type: bool
 # ipv6_server = false
 
-### Advanced
-
-#    Maximum number of blocks that are simultaneously sent per client.
-#    The maximum total count is calculated dynamically:
-#    max_total = ceil((#clients + max_users) * per_client / 4)
-#    type: int
-# max_simultaneous_block_sends_per_client = 40
-
-#    To reduce lag, block transfers are slowed down when a player is building something.
-#    This determines how long they are slowed down after placing or removing a node.
-#    type: float
-# full_block_send_enable_min_time_from_building = 2.0
-
-#    Maximum number of packets sent per send step, if you have a slow connection
-#    try reducing it, but don't reduce it to a number below double of targeted
-#    client number.
-#    type: int
-# max_packets_per_iteration = 1024
-
-#    Compression level to use when sending mapblocks to the client.
-#    -1 - use default compression level
-#    0 - least compression, fastest
-#    9 - best compression, slowest
-#    type: int min: -1 max: 9
-# map_compression_level_net = -1
-
-## Game
-
-#    Default game when creating a new world.
-#    This will be overridden when creating a world from the main menu.
-#    type: string
-# default_game = minetest
-
-#    Message of the day displayed to players connecting.
-#    type: string
-# motd =
-
-#    Maximum number of players that can be connected simultaneously.
-#    type: int
-# max_users = 15
-
-#    World directory (everything in the world is stored here).
-#    Not needed if starting from the main menu.
-#    type: path
-# map-dir =
-
-#    Time in seconds for item entity (dropped items) to live.
-#    Setting it to -1 disables the feature.
-#    type: int
-# item_entity_ttl = 900
-
-#    Specifies the default stack size of nodes, items and tools.
-#    Note that mods or games may explicitly set a stack for certain (or all) items.
-#    type: int
-# default_stack_max = 99
-
-#    Enable players getting damage and dying.
-#    type: bool
-# enable_damage = false
-
-#    Enable creative mode for all players
-#    type: bool
-# creative_mode = false
-
-#    A chosen map seed for a new map, leave empty for random.
-#    Will be overridden when creating a new world in the main menu.
-#    type: string
-# fixed_map_seed =
+## Server Security
 
 #    New users need to input this password.
 #    type: string
 # default_password =
 
+#    If enabled, players cannot join without a password or change theirs to an empty password.
+#    type: bool
+# disallow_empty_password = false
+
 #    The privileges that new users automatically get.
 #    See /privs in game for a full list on your server and mod configuration.
 #    type: string
@@ -1396,31 +724,6 @@
 #    type: string
 # basic_privs = interact, shout
 
-#    Whether players are shown to clients without any range limit.
-#    Deprecated, use the setting player_transfer_distance instead.
-#    type: bool
-# unlimited_player_transfer_distance = true
-
-#    Defines the maximal player transfer distance in blocks (0 = unlimited).
-#    type: int
-# player_transfer_distance = 0
-
-#    Whether to allow players to damage and kill each other.
-#    type: bool
-# enable_pvp = true
-
-#    Enable mod channels support.
-#    type: bool
-# enable_mod_channels = false
-
-#    If this is set, players will always (re)spawn at the given position.
-#    type: string
-# static_spawnpoint =
-
-#    If enabled, new players cannot join with an empty password.
-#    type: bool
-# disallow_empty_password = false
-
 #    If enabled, disable cheat prevention in multiplayer.
 #    type: bool
 # disable_anticheat = false
@@ -1430,394 +733,131 @@
 #    type: bool
 # enable_rollback_recording = false
 
-#    Format of player chat messages. The following strings are valid placeholders:
-#    @name, @message, @timestamp (optional)
-#    type: string
-# chat_message_format = <@name> @message
+### Client-side Modding
 
-#    If the execution of a chat command takes longer than this specified time in
-#    seconds, add the time information to the chat command message
-#    type: float
-# chatcommand_msg_time_threshold = 0.1
+#    Restricts the access of certain client-side functions on servers.
+#    Combine the byteflags below to restrict client-side features, or set to 0
+#    for no restrictions:
+#    LOAD_CLIENT_MODS: 1 (disable loading client-provided mods)
+#    CHAT_MESSAGES: 2 (disable send_chat_message call client-side)
+#    READ_ITEMDEFS: 4 (disable get_item_def call client-side)
+#    READ_NODEDEFS: 8 (disable get_node_def call client-side)
+#    LOOKUP_NODES_LIMIT: 16 (limits get_node call client-side to
+#    csm_restriction_noderange)
+#    READ_PLAYERINFO: 32 (disable get_player_names call client-side)
+#    type: int min: 0 max: 63
+# csm_restriction_flags = 62
 
-#    A message to be displayed to all clients when the server shuts down.
-#    type: string
-# kick_msg_shutdown = Server shutting down.
+#    If the CSM restriction for node range is enabled, get_node calls are limited
+#    to this distance from the player to the node.
+#    type: int min: 0 max: 4294967295
+# csm_restriction_noderange = 0
 
-#    A message to be displayed to all clients when the server crashes.
-#    type: string
-# kick_msg_crash = This server has experienced an internal error. You will now be disconnected.
+### Chat
 
-#    Whether to ask clients to reconnect after a (Lua) crash.
-#    Set this to true if your server is set up to restart automatically.
+#    Remove color codes from incoming chat messages
+#    Use this to stop players from being able to use color in their messages
 #    type: bool
-# ask_reconnect_on_crash = false
-
-#    From how far clients know about objects, stated in mapblocks (16 nodes).
-#
-#    Setting this larger than active_block_range will also cause the server
-#    to maintain active objects up to this distance in the direction the
-#    player is looking. (This can avoid mobs suddenly disappearing from view)
-#    type: int
-# active_object_send_range_blocks = 8
+# strip_color_codes = false
 
-#    The radius of the volume of blocks around every player that is subject to the
-#    active block stuff, stated in mapblocks (16 nodes).
-#    In active blocks objects are loaded and ABMs run.
-#    This is also the minimum range in which active objects (mobs) are maintained.
-#    This should be configured together with active_object_send_range_blocks.
-#    type: int
-# active_block_range = 4
+#    Set the maximum length of a chat message (in characters) sent by clients.
+#    type: int min: 10 max: 65535
+# chat_message_max_size = 500
 
-#    From how far blocks are sent to clients, stated in mapblocks (16 nodes).
-#    type: int
-# max_block_send_distance = 12
+#    Amount of messages a player may send per 10 seconds.
+#    type: float min: 1
+# chat_message_limit_per_10sec = 10.0
 
-#    Maximum number of forceloaded mapblocks.
-#    type: int
-# max_forceloaded_blocks = 16
+#    Kick players who sent more than X messages per 10 seconds.
+#    type: int min: 1 max: 65535
+# chat_message_limit_trigger_kick = 50
 
-#    Interval of sending time of day to clients.
-#    type: int
-# time_send_interval = 5
+## Server Gameplay
 
 #    Controls length of day/night cycle.
 #    Examples:
 #    72 = 20min, 360 = 4min, 1 = 24hour, 0 = day/night/whatever stays unchanged.
-#    type: int
+#    type: int min: 0
 # time_speed = 72
 
 #    Time of day when a new world is started, in millihours (0-23999).
 #    type: int min: 0 max: 23999
 # world_start_time = 6125
 
-#    Interval of saving important changes in the world, stated in seconds.
-#    type: float
-# server_map_save_interval = 5.3
-
-#    Set the maximum character length of a chat message sent by clients.
-#    type: int
-# chat_message_max_size = 500
-
-#    Amount of messages a player may send per 10 seconds.
-#    type: float
-# chat_message_limit_per_10sec = 10.0
+#    Time in seconds for item entity (dropped items) to live.
+#    Setting it to -1 disables the feature.
+#    type: int min: -1
+# item_entity_ttl = 900
 
-#    Kick players who sent more than X messages per 10 seconds.
-#    type: int
-# chat_message_limit_trigger_kick = 50
+#    Specifies the default stack size of nodes, items and tools.
+#    Note that mods or games may explicitly set a stack for certain (or all) items.
+#    type: int min: 1 max: 65535
+# default_stack_max = 99
 
 ### Physics
 
 #    Horizontal and vertical acceleration on ground or when climbing,
 #    in nodes per second per second.
-#    type: float
-# movement_acceleration_default = 3
+#    type: float min: 0
+# movement_acceleration_default = 3.0
 
 #    Horizontal acceleration in air when jumping or falling,
 #    in nodes per second per second.
-#    type: float
-# movement_acceleration_air = 2
+#    type: float min: 0
+# movement_acceleration_air = 2.0
 
 #    Horizontal and vertical acceleration in fast mode,
 #    in nodes per second per second.
-#    type: float
-# movement_acceleration_fast = 10
+#    type: float min: 0
+# movement_acceleration_fast = 10.0
 
 #    Walking and flying speed, in nodes per second.
-#    type: float
-# movement_speed_walk = 4
+#    type: float min: 0
+# movement_speed_walk = 4.0
 
 #    Sneaking speed, in nodes per second.
-#    type: float
+#    type: float min: 0
 # movement_speed_crouch = 1.35
 
 #    Walking, flying and climbing speed in fast mode, in nodes per second.
-#    type: float
-# movement_speed_fast = 20
+#    type: float min: 0
+# movement_speed_fast = 20.0
 
 #    Vertical climbing speed, in nodes per second.
-#    type: float
-# movement_speed_climb = 3
+#    type: float min: 0
+# movement_speed_climb = 3.0
 
 #    Initial vertical speed when jumping, in nodes per second.
-#    type: float
+#    type: float min: 0
 # movement_speed_jump = 6.5
 
+#    How much you are slowed down when moving inside a liquid.
 #    Decrease this to increase liquid resistance to movement.
-#    type: float
-# movement_liquid_fluidity = 1
+#    type: float min: 0.001
+# movement_liquid_fluidity = 1.0
 
 #    Maximum liquid resistance. Controls deceleration when entering liquid at
 #    high speed.
 #    type: float
 # movement_liquid_fluidity_smooth = 0.5
 
-#    Controls sinking speed in liquid.
+#    Controls sinking speed in liquid when idling. Negative values will cause
+#    you to rise instead.
 #    type: float
-# movement_liquid_sink = 10
+# movement_liquid_sink = 10.0
 
 #    Acceleration of gravity, in nodes per second per second.
 #    type: float
 # movement_gravity = 9.81
 
-### Advanced
-
-#    Handling for deprecated Lua API calls:
-#    -    none: Do not log deprecated calls
-#    -    log: mimic and log backtrace of deprecated call (default).
-#    -    error: abort on usage of deprecated call (suggested for mod developers).
-#    type: enum values: none, log, error
-# deprecated_lua_api_handling = log
-
-#    Number of extra blocks that can be loaded by /clearobjects at once.
-#    This is a trade-off between SQLite transaction overhead and
-#    memory consumption (4096=100MB, as a rule of thumb).
-#    type: int
-# max_clearobjects_extra_loaded_blocks = 4096
-
-#    How much the server will wait before unloading unused mapblocks.
-#    Higher value is smoother, but will use more RAM.
-#    type: int
-# server_unload_unused_data_timeout = 29
-
-#    Maximum number of statically stored objects in a block.
-#    type: int
-# max_objects_per_block = 256
-
-#    See https://www.sqlite.org/pragma.html#pragma_synchronous
-#    type: enum values: 0, 1, 2
-# sqlite_synchronous = 2
-
-#    Compression level to use when saving mapblocks to disk.
-#    -1 - use default compression level
-#    0 - least compression, fastest
-#    9 - best compression, slowest
-#    type: int min: -1 max: 9
-# map_compression_level_disk = -1
-
-#    Length of a server tick and the interval at which objects are generally updated over
-#    network.
-#    type: float
-# dedicated_server_step = 0.09
-
-#    Length of time between active block management cycles
-#    type: float
-# active_block_mgmt_interval = 2.0
-
-#    Length of time between Active Block Modifier (ABM) execution cycles
-#    type: float
-# abm_interval = 1.0
-
-#    The time budget allowed for ABMs to execute on each step
-#    (as a fraction of the ABM Interval)
-#    type: float min: 0.1 max: 0.9
-# abm_time_budget = 0.2
-
-#    Length of time between NodeTimer execution cycles
-#    type: float
-# nodetimer_interval = 0.2
-
-#    If enabled, invalid world data won't cause the server to shut down.
-#    Only enable this if you know what you are doing.
-#    type: bool
-# ignore_world_load_errors = false
-
-#    Max liquids processed per step.
-#    type: int
-# liquid_loop_max = 100000
-
-#    The time (in seconds) that the liquids queue may grow beyond processing
-#    capacity until an attempt is made to decrease its size by dumping old queue
-#    items.  A value of 0 disables the functionality.
-#    type: int
-# liquid_queue_purge_time = 0
-
-#    Liquid update interval in seconds.
-#    type: float
-# liquid_update = 1.0
-
-#    At this distance the server will aggressively optimize which blocks are sent to
-#    clients.
-#    Small values potentially improve performance a lot, at the expense of visible
-#    rendering glitches (some blocks will not be rendered under water and in caves,
-#    as well as sometimes on land).
-#    Setting this to a value greater than max_block_send_distance disables this
-#    optimization.
-#    Stated in mapblocks (16 nodes).
-#    type: int min: 2
-# block_send_optimize_distance = 4
-
-#    If enabled the server will perform map block occlusion culling based on
-#    on the eye position of the player. This can reduce the number of blocks
-#    sent to the client 50-80%. The client will not longer receive most invisible
-#    so that the utility of noclip mode is reduced.
-#    type: bool
-# server_side_occlusion_culling = true
-
-#    Restricts the access of certain client-side functions on servers.
-#    Combine the byteflags below to restrict client-side features, or set to 0
-#    for no restrictions:
-#    LOAD_CLIENT_MODS: 1 (disable loading client-provided mods)
-#    CHAT_MESSAGES: 2 (disable send_chat_message call client-side)
-#    READ_ITEMDEFS: 4 (disable get_item_def call client-side)
-#    READ_NODEDEFS: 8 (disable get_node_def call client-side)
-#    LOOKUP_NODES_LIMIT: 16 (limits get_node call client-side to
-#    csm_restriction_noderange)
-#    READ_PLAYERINFO: 32 (disable get_player_names call client-side)
-#    type: int
-# csm_restriction_flags = 62
-
-#    If the CSM restriction for node range is enabled, get_node calls are limited
-#    to this distance from the player to the node.
-#    type: int
-# csm_restriction_noderange = 0
-
-## Security
-
-#    Prevent mods from doing insecure things like running shell commands.
-#    type: bool
-# secure.enable_security = true
-
-#    Comma-separated list of trusted mods that are allowed to access insecure
-#    functions even when mod security is on (via request_insecure_environment()).
-#    type: string
-# secure.trusted_mods =
-
-#    Comma-separated list of mods that are allowed to access HTTP APIs, which
-#    allow them to upload and download data to/from the internet.
-#    type: string
-# secure.http_mods =
-
-## Advanced
-
-### Profiling
-
-#    Load the game profiler to collect game profiling data.
-#    Provides a /profiler command to access the compiled profile.
-#    Useful for mod developers and server operators.
-#    type: bool
-# profiler.load = false
-
-#    The default format in which profiles are being saved,
-#    when calling `/profiler save [format]` without format.
-#    type: enum values: txt, csv, lua, json, json_pretty
-# profiler.default_report_format = txt
-
-#    The file path relative to your worldpath in which profiles will be saved to.
-#    type: string
-# profiler.report_path = ""
-
-#### Instrumentation
-
-#    Instrument the methods of entities on registration.
-#    type: bool
-# instrument.entity = true
-
-#    Instrument the action function of Active Block Modifiers on registration.
-#    type: bool
-# instrument.abm = true
-
-#    Instrument the action function of Loading Block Modifiers on registration.
-#    type: bool
-# instrument.lbm = true
-
-#    Instrument chat commands on registration.
-#    type: bool
-# instrument.chatcommand = true
-
-#    Instrument global callback functions on registration.
-#    (anything you pass to a minetest.register_*() function)
-#    type: bool
-# instrument.global_callback = true
-
-##### Advanced
-
-#    Instrument builtin.
-#    This is usually only needed by core/builtin contributors
-#    type: bool
-# instrument.builtin = false
-
-#    Have the profiler instrument itself:
-#    * Instrument an empty function.
-#    This estimates the overhead, that instrumentation is adding (+1 function call).
-#    * Instrument the sampler being used to update the statistics.
-#    type: bool
-# instrument.profiler = false
-
 #
-# Client and Server
+# Mapgen
 #
 
-#    Name of the player.
-#    When running a server, clients connecting with this name are admins.
-#    When starting from the main menu, this is overridden.
-#    type: string
-# name =
-
-#    Set the language. Leave empty to use the system language.
-#    A restart is required after changing this.
-#    type: enum values: , be, bg, ca, cs, da, de, el, en, eo, es, et, eu, fi, fr, gd, gl, hu, id, it, ja, jbo, kk, ko, lt, lv, ms, nb, nl, nn, pl, pt, pt_BR, ro, ru, sk, sl, sr_Cyrl, sr_Latn, sv, sw, tr, uk, vi, zh_CN, zh_TW
-# language =
-
-#    Level of logging to be written to debug.txt:
-#    -    <nothing> (no logging)
-#    -    none (messages with no level)
-#    -    error
-#    -    warning
-#    -    action
-#    -    info
-#    -    verbose
-#    -    trace
-#    type: enum values: , none, error, warning, action, info, verbose, trace
-# debug_log_level = action
-
-#    If the file size of debug.txt exceeds the number of megabytes specified in
-#    this setting when it is opened, the file is moved to debug.txt.1,
-#    deleting an older debug.txt.1 if it exists.
-#    debug.txt is only moved if this setting is positive.
-#    type: int
-# debug_log_size_max = 50
-
-#    Minimal level of logging to be written to chat.
-#    type: enum values: , none, error, warning, action, info, verbose, trace
-# chat_log_level = error
-
-#    Enable IPv6 support (for both client and server).
-#    Required for IPv6 connections to work at all.
-#    type: bool
-# enable_ipv6 = true
-
-## Advanced
-
-#    Maximum time an interactive request (e.g. server list fetch) may take, stated in milliseconds.
-#    type: int
-# curl_timeout = 20000
-
-#    Limits number of parallel HTTP requests. Affects:
-#    -    Media fetch if server uses remote_media setting.
-#    -    Serverlist download and server announcement.
-#    -    Downloads performed by main menu (e.g. mod manager).
-#    Only has an effect if compiled with cURL.
-#    type: int
-# curl_parallel_limit = 8
-
-#    Maximum time a file download (e.g. a mod download) may take, stated in milliseconds.
-#    type: int
-# curl_file_download_timeout = 300000
-
-#    Replaces the default main menu with a custom one.
+#    A chosen map seed for a new map, leave empty for random.
+#    Will be overridden when creating a new world in the main menu.
 #    type: string
-# main_menu_script =
-
-#    Print the engine's profiling data in regular intervals (in seconds).
-#    0 = disable. Useful for developers.
-#    type: int
-# profiler_print_interval = 0
-
-#
-# Mapgen
-#
+# fixed_map_seed =
 
 #    Name of map generator to be used when creating a new world.
 #    Creating a world in the main menu will override this.
@@ -1827,11 +867,11 @@
 # mg_name = v7
 
 #    Water surface level of the world.
-#    type: int
+#    type: int min: -31000 max: 31000
 # water_level = 1
 
 #    From how far blocks are generated for clients, stated in mapblocks (16 nodes).
-#    type: int
+#    type: int min: 1 max: 32767
 # max_block_generate_distance = 10
 
 #    Limit of map generation, in nodes, in all 6 directions from (0, 0, 0).
@@ -1846,7 +886,7 @@
 #    type: flags possible values: caves, dungeons, light, decorations, biomes, ores, nocaves, nodungeons, nolight, nodecorations, nobiomes, noores
 # mg_flags = caves,dungeons,light,decorations,biomes,ores
 
-## Biome API temperature and humidity noise parameters
+## Biome API noise parameters
 
 #    Temperature variation for biomes.
 #    type: noise_params_2d
@@ -1913,7 +953,7 @@
 # mgv5_cave_width = 0.09
 
 #    Y of upper limit of large caves.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgv5_large_cave_depth = -256
 
 #    Minimum limit of random number of small caves per mapchunk.
@@ -1937,11 +977,11 @@
 # mgv5_large_cave_flooded = 0.5
 
 #    Y-level of cavern upper limit.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgv5_cavern_limit = -256
 
 #    Y-distance over which caverns expand to full size.
-#    type: int
+#    type: int min: 0 max: 32767
 # mgv5_cavern_taper = 256
 
 #    Defines full size of caverns, smaller values create larger caverns.
@@ -1949,11 +989,11 @@
 # mgv5_cavern_threshold = 0.7
 
 #    Lower Y limit of dungeons.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgv5_dungeon_ymin = -31000
 
 #    Upper Y limit of dungeons.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgv5_dungeon_ymax = 31000
 
 ### Noises
@@ -2082,11 +1122,11 @@
 # mgv6_freq_beach = 0.15
 
 #    Lower Y limit of dungeons.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgv6_dungeon_ymin = -31000
 
 #    Upper Y limit of dungeons.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgv6_dungeon_ymax = 31000
 
 ### Noises
@@ -2244,22 +1284,22 @@
 # mgv7_spflags = mountains,ridges,nofloatlands,caverns
 
 #    Y of mountain density gradient zero level. Used to shift mountains vertically.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgv7_mount_zero_level = 0
 
 #    Lower Y limit of floatlands.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgv7_floatland_ymin = 1024
 
 #    Upper Y limit of floatlands.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgv7_floatland_ymax = 4096
 
 #    Y-distance over which floatlands taper from full density to nothing.
 #    Tapering starts at this distance from the Y limit.
 #    For a solid floatland layer, this controls the height of hills/mountains.
 #    Must be less than or equal to half the distance between the Y limits.
-#    type: int
+#    type: int min: 0 max: 32767
 # mgv7_floatland_taper = 256
 
 #    Exponent of the floatland tapering. Alters the tapering behaviour.
@@ -2289,7 +1329,7 @@
 #    required value depending on 'mgv7_np_floatland'), to avoid
 #    server-intensive extreme water flow and to avoid vast flooding of the
 #    world surface below.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgv7_floatland_ywater = -31000
 
 #    Controls width of tunnels, a smaller value creates wider tunnels.
@@ -2299,7 +1339,7 @@
 # mgv7_cave_width = 0.09
 
 #    Y of upper limit of large caves.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgv7_large_cave_depth = -33
 
 #    Minimum limit of random number of small caves per mapchunk.
@@ -2323,11 +1363,11 @@
 # mgv7_large_cave_flooded = 0.5
 
 #    Y-level of cavern upper limit.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgv7_cavern_limit = -256
 
 #    Y-distance over which caverns expand to full size.
-#    type: int
+#    type: int min: 0 max: 32767
 # mgv7_cavern_taper = 256
 
 #    Defines full size of caverns, smaller values create larger caverns.
@@ -2335,11 +1375,11 @@
 # mgv7_cavern_threshold = 0.7
 
 #    Lower Y limit of dungeons.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgv7_dungeon_ymin = -31000
 
 #    Upper Y limit of dungeons.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgv7_dungeon_ymax = 31000
 
 ### Noises
@@ -2560,7 +1600,7 @@
 # mgcarpathian_cave_width = 0.09
 
 #    Y of upper limit of large caves.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgcarpathian_large_cave_depth = -33
 
 #    Minimum limit of random number of small caves per mapchunk.
@@ -2584,11 +1624,11 @@
 # mgcarpathian_large_cave_flooded = 0.5
 
 #    Y-level of cavern upper limit.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgcarpathian_cavern_limit = -256
 
 #    Y-distance over which caverns expand to full size.
-#    type: int
+#    type: int min: 0 max: 32767
 # mgcarpathian_cavern_taper = 256
 
 #    Defines full size of caverns, smaller values create larger caverns.
@@ -2596,11 +1636,11 @@
 # mgcarpathian_cavern_threshold = 0.7
 
 #    Lower Y limit of dungeons.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgcarpathian_dungeon_ymin = -31000
 
 #    Upper Y limit of dungeons.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgcarpathian_dungeon_ymax = 31000
 
 ### Noises
@@ -2834,11 +1874,11 @@
 # mgflat_spflags = nolakes,nohills,nocaverns
 
 #    Y of flat ground.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgflat_ground_level = 8
 
 #    Y of upper limit of large caves.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgflat_large_cave_depth = -33
 
 #    Minimum limit of random number of small caves per mapchunk.
@@ -2888,11 +1928,11 @@
 # mgflat_hill_steepness = 64.0
 
 #    Y-level of cavern upper limit.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgflat_cavern_limit = -256
 
 #    Y-distance over which caverns expand to full size.
-#    type: int
+#    type: int min: 0 max: 32767
 # mgflat_cavern_taper = 256
 
 #    Defines full size of caverns, smaller values create larger caverns.
@@ -2900,11 +1940,11 @@
 # mgflat_cavern_threshold = 0.7
 
 #    Lower Y limit of dungeons.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgflat_dungeon_ymin = -31000
 
 #    Upper Y limit of dungeons.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgflat_dungeon_ymax = 31000
 
 ### Noises
@@ -3002,7 +2042,7 @@
 # mgfractal_cave_width = 0.09
 
 #    Y of upper limit of large caves.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgfractal_large_cave_depth = -33
 
 #    Minimum limit of random number of small caves per mapchunk.
@@ -3026,11 +2066,11 @@
 # mgfractal_large_cave_flooded = 0.5
 
 #    Lower Y limit of dungeons.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgfractal_dungeon_ymin = -31000
 
 #    Upper Y limit of dungeons.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgfractal_dungeon_ymax = 31000
 
 #    Selects one of 18 fractal types.
@@ -3059,7 +2099,7 @@
 #    Increasing this increases the amount of fine detail, but also
 #    increases processing load.
 #    At iterations = 20 this mapgen has a similar load to mapgen V7.
-#    type: int
+#    type: int min: 1 max: 65535
 # mgfractal_iterations = 11
 
 #    (X,Y,Z) scale of fractal in nodes.
@@ -3201,11 +2241,11 @@
 #    The vertical distance over which heat drops by 20 if 'altitude_chill' is
 #    enabled. Also the vertical distance over which humidity drops by 10 if
 #    'altitude_dry' is enabled.
-#    type: int
+#    type: int min: 0 max: 65535
 # mgvalleys_altitude_chill = 90
 
 #    Depth below which you'll find large caves.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgvalleys_large_cave_depth = -33
 
 #    Minimum limit of random number of small caves per mapchunk.
@@ -3229,11 +2269,11 @@
 # mgvalleys_large_cave_flooded = 0.5
 
 #    Depth below which you'll find giant caverns.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgvalleys_cavern_limit = -256
 
 #    Y-distance over which caverns expand to full size.
-#    type: int
+#    type: int min: 0 max: 32767
 # mgvalleys_cavern_taper = 192
 
 #    Defines full size of caverns, smaller values create larger caverns.
@@ -3241,11 +2281,11 @@
 # mgvalleys_cavern_threshold = 0.6
 
 #    How deep to make rivers.
-#    type: int
+#    type: int min: 0 max: 65535
 # mgvalleys_river_depth = 4
 
 #    How wide to make rivers.
-#    type: int
+#    type: int min: 0 max: 65535
 # mgvalleys_river_size = 5
 
 #    Controls width of tunnels, a smaller value creates wider tunnels.
@@ -3255,11 +2295,11 @@
 # mgvalleys_cave_width = 0.09
 
 #    Lower Y limit of dungeons.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgvalleys_dungeon_ymin = -31000
 
 #    Upper Y limit of dungeons.
-#    type: int
+#    type: int min: -31000 max: 31000
 # mgvalleys_dungeon_ymax = 63
 
 ### Noises
@@ -3407,15 +2447,509 @@
 #    flags       =
 # }
 
+#
+# Advanced
+#
+
+## Developer Options
+
+#    Enable Lua modding support on client.
+#    This support is experimental and API can change.
+#    type: bool
+# enable_client_modding = false
+
+#    Replaces the default main menu with a custom one.
+#    type: string
+# main_menu_script =
+
+### Mod Security
+
+#    Prevent mods from doing insecure things like running shell commands.
+#    type: bool
+# secure.enable_security = true
+
+#    Comma-separated list of trusted mods that are allowed to access insecure
+#    functions even when mod security is on (via request_insecure_environment()).
+#    type: string
+# secure.trusted_mods =
+
+#    Comma-separated list of mods that are allowed to access HTTP APIs, which
+#    allow them to upload and download data to/from the internet.
+#    type: string
+# secure.http_mods =
+
+### Debugging
+
+#    Level of logging to be written to debug.txt:
+#    -    <nothing> (no logging)
+#    -    none (messages with no level)
+#    -    error
+#    -    warning
+#    -    action
+#    -    info
+#    -    verbose
+#    -    trace
+#    type: enum values: , none, error, warning, action, info, verbose, trace
+# debug_log_level = action
+
+#    If the file size of debug.txt exceeds the number of megabytes specified in
+#    this setting when it is opened, the file is moved to debug.txt.1,
+#    deleting an older debug.txt.1 if it exists.
+#    debug.txt is only moved if this setting is positive.
+#    type: int min: 1
+# debug_log_size_max = 50
+
+#    Minimal level of logging to be written to chat.
+#    type: enum values: , none, error, warning, action, info, verbose, trace
+# chat_log_level = error
+
+#    Handling for deprecated Lua API calls:
+#    -    none: Do not log deprecated calls
+#    -    log: mimic and log backtrace of deprecated call (default).
+#    -    error: abort on usage of deprecated call (suggested for mod developers).
+#    type: enum values: none, log, error
+# deprecated_lua_api_handling = log
+
+#    Enable random user input (only used for testing).
+#    type: bool
+# random_input = false
+
+#    Enable mod channels support.
+#    type: bool
+# enable_mod_channels = false
+
+### Mod Profiler
+
+#    Load the game profiler to collect game profiling data.
+#    Provides a /profiler command to access the compiled profile.
+#    Useful for mod developers and server operators.
+#    type: bool
+# profiler.load = false
+
+#    The default format in which profiles are being saved,
+#    when calling `/profiler save [format]` without format.
+#    type: enum values: txt, csv, lua, json, json_pretty
+# profiler.default_report_format = txt
+
+#    The file path relative to your worldpath in which profiles will be saved to.
+#    type: string
+# profiler.report_path = ""
+
+#    Instrument the methods of entities on registration.
+#    type: bool
+# instrument.entity = true
+
+#    Instrument the action function of Active Block Modifiers on registration.
+#    type: bool
+# instrument.abm = true
+
+#    Instrument the action function of Loading Block Modifiers on registration.
+#    type: bool
+# instrument.lbm = true
+
+#    Instrument chat commands on registration.
+#    type: bool
+# instrument.chatcommand = true
+
+#    Instrument global callback functions on registration.
+#    (anything you pass to a minetest.register_*() function)
+#    type: bool
+# instrument.global_callback = true
+
+#    Instrument builtin.
+#    This is usually only needed by core/builtin contributors
+#    type: bool
+# instrument.builtin = false
+
+#    Have the profiler instrument itself:
+#    * Instrument an empty function.
+#    This estimates the overhead, that instrumentation is adding (+1 function call).
+#    * Instrument the sampler being used to update the statistics.
+#    type: bool
+# instrument.profiler = false
+
+### Engine profiler
+
+#    Print the engine's profiling data in regular intervals (in seconds).
+#    0 = disable. Useful for developers.
+#    type: int min: 0
+# profiler_print_interval = 0
+
 ## Advanced
 
+#    Enable IPv6 support (for both client and server).
+#    Required for IPv6 connections to work at all.
+#    type: bool
+# enable_ipv6 = true
+
+#    If enabled, invalid world data won't cause the server to shut down.
+#    Only enable this if you know what you are doing.
+#    type: bool
+# ignore_world_load_errors = false
+
+### Graphics
+
+#    Path to shader directory. If no path is defined, default location will be used.
+#    type: path
+# shader_path =
+
+#    The rendering back-end.
+#    A restart is required after changing this.
+#    Note: On Android, stick with OGLES1 if unsure! App may fail to start otherwise.
+#    On other platforms, OpenGL is recommended.
+#    Shaders are supported by OpenGL (desktop only) and OGLES2 (experimental)
+#    type: enum values: opengl, ogles1, ogles2
+# video_driver = opengl
+
+#    Distance in nodes at which transparency depth sorting is enabled
+#    Use this to limit the performance impact of transparency depth sorting
+#    type: int min: 0 max: 128
+# transparency_sorting_distance = 16
+
+#    Enable vertex buffer objects.
+#    This should greatly improve graphics performance.
+#    type: bool
+# enable_vbo = true
+
+#    Radius of cloud area stated in number of 64 node cloud squares.
+#    Values larger than 26 will start to produce sharp cutoffs at cloud area corners.
+#    type: int min: 1 max: 62
+# cloud_radius = 12
+
+#    Whether node texture animations should be desynchronized per mapblock.
+#    type: bool
+# desynchronize_mapblock_texture_animation = true
+
+#    Enables caching of facedir rotated meshes.
+#    type: bool
+# enable_mesh_cache = false
+
+#    Delay between mesh updates on the client in ms. Increasing this will slow
+#    down the rate of mesh updates, thus reducing jitter on slower clients.
+#    type: int min: 0 max: 50
+# mesh_generation_interval = 0
+
+#    Size of the MapBlock cache of the mesh generator. Increasing this will
+#    increase the cache hit %, reducing the data being copied from the main
+#    thread, thus reducing jitter.
+#    type: int min: 0 max: 1000
+# meshgen_block_cache_size = 20
+
+#    True = 256
+#    False = 128
+#    Usable to make minimap smoother on slower machines.
+#    type: bool
+# minimap_double_scan_height = true
+
+#    Textures on a node may be aligned either to the node or to the world.
+#    The former mode suits better things like machines, furniture, etc., while
+#    the latter makes stairs and microblocks fit surroundings better.
+#    However, as this possibility is new, thus may not be used by older servers,
+#    this option allows enforcing it for certain node types. Note though that
+#    that is considered EXPERIMENTAL and may not work properly.
+#    type: enum values: disable, enable, force_solid, force_nodebox
+# world_aligned_mode = enable
+
+#    World-aligned textures may be scaled to span several nodes. However,
+#    the server may not send the scale you want, especially if you use
+#    a specially-designed texture pack; with this option, the client tries
+#    to determine the scale automatically basing on the texture size.
+#    See also texture_min_size.
+#    Warning: This option is EXPERIMENTAL!
+#    type: enum values: disable, enable, force
+# autoscale_mode = disable
+
+### Font
+
+#    type: bool
+# font_bold = false
+
+#    type: bool
+# font_italic = false
+
+#    Shadow offset (in pixels) of the default font. If 0, then shadow will not be drawn.
+#    type: int min: 0 max: 65535
+# font_shadow = 1
+
+#    Opaqueness (alpha) of the shadow behind the default font, between 0 and 255.
+#    type: int min: 0 max: 255
+# font_shadow_alpha = 127
+
+#    Font size of the default font where 1 unit = 1 pixel at 96 DPI
+#    type: int min: 5 max: 72
+# font_size = 16
+
+#    For pixel-style fonts that do not scale well, this ensures that font sizes used
+#    with this font will always be divisible by this value, in pixels. For instance,
+#    a pixel font 16 pixels tall should have this set to 16, so it will only ever be
+#    sized 16, 32, 48, etc., so a mod requesting a size of 25 will get 32.
+#    type: int min: 1
+# font_size_divisible_by = 1
+
+#    Path to the default font. Must be a TrueType font.
+#    The fallback font will be used if the font cannot be loaded.
+#    type: filepath
+# font_path = fonts/Arimo-Regular.ttf
+
+#    type: filepath
+# font_path_bold = fonts/Arimo-Bold.ttf
+
+#    type: filepath
+# font_path_italic = fonts/Arimo-Italic.ttf
+
+#    type: filepath
+# font_path_bold_italic = fonts/Arimo-BoldItalic.ttf
+
+#    Font size of the monospace font where 1 unit = 1 pixel at 96 DPI
+#    type: int min: 5 max: 72
+# mono_font_size = 16
+
+#    For pixel-style fonts that do not scale well, this ensures that font sizes used
+#    with this font will always be divisible by this value, in pixels. For instance,
+#    a pixel font 16 pixels tall should have this set to 16, so it will only ever be
+#    sized 16, 32, 48, etc., so a mod requesting a size of 25 will get 32.
+#    type: int min: 1
+# mono_font_size_divisible_by = 1
+
+#    Path to the monospace font. Must be a TrueType font.
+#    This font is used for e.g. the console and profiler screen.
+#    type: filepath
+# mono_font_path = fonts/Cousine-Regular.ttf
+
+#    type: filepath
+# mono_font_path_bold = fonts/Cousine-Bold.ttf
+
+#    type: filepath
+# mono_font_path_italic = fonts/Cousine-Italic.ttf
+
+#    type: filepath
+# mono_font_path_bold_italic = fonts/Cousine-BoldItalic.ttf
+
+#    Path of the fallback font. Must be a TrueType font.
+#    This font will be used for certain languages or if the default font is unavailable.
+#    type: filepath
+# fallback_font_path = fonts/DroidSansFallbackFull.ttf
+
+### Lighting
+
+#    Gradient of light curve at minimum light level.
+#    Controls the contrast of the lowest light levels.
+#    type: float min: 0 max: 3
+# lighting_alpha = 0.0
+
+#    Gradient of light curve at maximum light level.
+#    Controls the contrast of the highest light levels.
+#    type: float min: 0 max: 3
+# lighting_beta = 1.5
+
+#    Strength of light curve boost.
+#    The 3 'boost' parameters define a range of the light
+#    curve that is boosted in brightness.
+#    type: float min: 0 max: 0.4
+# lighting_boost = 0.2
+
+#    Center of light curve boost range.
+#    Where 0.0 is minimum light level, 1.0 is maximum light level.
+#    type: float min: 0 max: 1
+# lighting_boost_center = 0.5
+
+#    Spread of light curve boost range.
+#    Controls the width of the range to be boosted.
+#    Standard deviation of the light curve boost Gaussian.
+#    type: float min: 0 max: 0.4
+# lighting_boost_spread = 0.2
+
+### Networking
+
+#    Prometheus listener address.
+#    If Minetest is compiled with ENABLE_PROMETHEUS option enabled,
+#    enable metrics listener for Prometheus on that address.
+#    Metrics can be fetched on http://127.0.0.1:30000/metrics
+#    type: string
+# prometheus_listener_address = 127.0.0.1:30000
+
+#    Maximum size of the out chat queue.
+#    0 to disable queueing and -1 to make the queue size unlimited.
+#    type: int min: -1 max: 32767
+# max_out_chat_queue_size = 20
+
+#    Timeout for client to remove unused map data from memory, in seconds.
+#    type: float min: 0
+# client_unload_unused_data_timeout = 600.0
+
+#    Maximum number of mapblocks for client to be kept in memory.
+#    Set to -1 for unlimited amount.
+#    type: int min: -1 max: 2147483647
+# client_mapblock_limit = 7500
+
+#    Whether to show the client debug info (has the same effect as hitting F5).
+#    type: bool
+# show_debug = false
+
+#    Maximum number of blocks that are simultaneously sent per client.
+#    The maximum total count is calculated dynamically:
+#    max_total = ceil((#clients + max_users) * per_client / 4)
+#    type: int min: 1 max: 4294967295
+# max_simultaneous_block_sends_per_client = 40
+
+#    To reduce lag, block transfers are slowed down when a player is building something.
+#    This determines how long they are slowed down after placing or removing a node.
+#    type: float min: 0
+# full_block_send_enable_min_time_from_building = 2.0
+
+#    Maximum number of packets sent per send step, if you have a slow connection
+#    try reducing it, but don't reduce it to a number below double of targeted
+#    client number.
+#    type: int min: 1 max: 65535
+# max_packets_per_iteration = 1024
+
+#    Compression level to use when sending mapblocks to the client.
+#    -1 - use default compression level
+#    0 - least compression, fastest
+#    9 - best compression, slowest
+#    type: int min: -1 max: 9
+# map_compression_level_net = -1
+
+### Server
+
+#    Format of player chat messages. The following strings are valid placeholders:
+#    @name, @message, @timestamp (optional)
+#    type: string
+# chat_message_format = <@name> @message
+
+#    If the execution of a chat command takes longer than this specified time in
+#    seconds, add the time information to the chat command message
+#    type: float min: 0
+# chatcommand_msg_time_threshold = 0.1
+
+#    A message to be displayed to all clients when the server shuts down.
+#    type: string
+# kick_msg_shutdown = Server shutting down.
+
+#    A message to be displayed to all clients when the server crashes.
+#    type: string
+# kick_msg_crash = This server has experienced an internal error. You will now be disconnected.
+
+#    Whether to ask clients to reconnect after a (Lua) crash.
+#    Set this to true if your server is set up to restart automatically.
+#    type: bool
+# ask_reconnect_on_crash = false
+
+### Server/Env Performance
+
+#    Length of a server tick and the interval at which objects are generally updated over
+#    network, stated in seconds.
+#    type: float min: 0
+# dedicated_server_step = 0.09
+
+#    Whether players are shown to clients without any range limit.
+#    Deprecated, use the setting player_transfer_distance instead.
+#    type: bool
+# unlimited_player_transfer_distance = true
+
+#    Defines the maximal player transfer distance in blocks (0 = unlimited).
+#    type: int min: 0 max: 65535
+# player_transfer_distance = 0
+
+#    From how far clients know about objects, stated in mapblocks (16 nodes).
+#
+#    Setting this larger than active_block_range will also cause the server
+#    to maintain active objects up to this distance in the direction the
+#    player is looking. (This can avoid mobs suddenly disappearing from view)
+#    type: int min: 1 max: 65535
+# active_object_send_range_blocks = 8
+
+#    The radius of the volume of blocks around every player that is subject to the
+#    active block stuff, stated in mapblocks (16 nodes).
+#    In active blocks objects are loaded and ABMs run.
+#    This is also the minimum range in which active objects (mobs) are maintained.
+#    This should be configured together with active_object_send_range_blocks.
+#    type: int min: 1 max: 65535
+# active_block_range = 4
+
+#    From how far blocks are sent to clients, stated in mapblocks (16 nodes).
+#    type: int min: 1 max: 65535
+# max_block_send_distance = 12
+
+#    Maximum number of forceloaded mapblocks.
+#    type: int min: 0
+# max_forceloaded_blocks = 16
+
+#    Interval of sending time of day to clients, stated in seconds.
+#    type: float min: 0.001
+# time_send_interval = 5.0
+
+#    Interval of saving important changes in the world, stated in seconds.
+#    type: float min: 0.001
+# server_map_save_interval = 5.3
+
+#    How long the server will wait before unloading unused mapblocks, stated in seconds.
+#    Higher value is smoother, but will use more RAM.
+#    type: int min: 0 max: 4294967295
+# server_unload_unused_data_timeout = 29
+
+#    Maximum number of statically stored objects in a block.
+#    type: int min: 1 max: 65535
+# max_objects_per_block = 256
+
+#    Length of time between active block management cycles, stated in seconds.
+#    type: float min: 0
+# active_block_mgmt_interval = 2.0
+
+#    Length of time between Active Block Modifier (ABM) execution cycles, stated in seconds.
+#    type: float min: 0
+# abm_interval = 1.0
+
+#    The time budget allowed for ABMs to execute on each step
+#    (as a fraction of the ABM Interval)
+#    type: float min: 0.1 max: 0.9
+# abm_time_budget = 0.2
+
+#    Length of time between NodeTimer execution cycles, stated in seconds.
+#    type: float min: 0
+# nodetimer_interval = 0.2
+
+#    Max liquids processed per step.
+#    type: int min: 1 max: 4294967295
+# liquid_loop_max = 100000
+
+#    The time (in seconds) that the liquids queue may grow beyond processing
+#    capacity until an attempt is made to decrease its size by dumping old queue
+#    items.  A value of 0 disables the functionality.
+#    type: int min: 0 max: 65535
+# liquid_queue_purge_time = 0
+
+#    Liquid update interval in seconds.
+#    type: float min: 0.001
+# liquid_update = 1.0
+
+#    At this distance the server will aggressively optimize which blocks are sent to
+#    clients.
+#    Small values potentially improve performance a lot, at the expense of visible
+#    rendering glitches (some blocks will not be rendered under water and in caves,
+#    as well as sometimes on land).
+#    Setting this to a value greater than max_block_send_distance disables this
+#    optimization.
+#    Stated in mapblocks (16 nodes).
+#    type: int min: 2 max: 32767
+# block_send_optimize_distance = 4
+
+#    If enabled the server will perform map block occlusion culling based on
+#    on the eye position of the player. This can reduce the number of blocks
+#    sent to the client 50-80%. The client will not longer receive most invisible
+#    so that the utility of noclip mode is reduced.
+#    type: bool
+# server_side_occlusion_culling = true
+
+### Mapgen
+
 #    Size of mapchunks generated by mapgen, stated in mapblocks (16 nodes).
 #    WARNING!: There is no benefit, and there are several dangers, in
 #    increasing this value above 5.
 #    Reducing this value increases cave and dungeon density.
 #    Altering this value is for special usage, leaving it unchanged is
 #    recommended.
-#    type: int
+#    type: int min: 1 max: 10
 # chunksize = 5
 
 #    Dump the mapgen debug information.
@@ -3446,28 +2980,545 @@
 #    speed, but this may harm game performance by interfering with other
 #    processes, especially in singleplayer and/or when running Lua code in
 #    'on_generated'. For many users the optimum setting may be '1'.
-#    type: int
+#    type: int min: 0 max: 32767
 # num_emerge_threads = 1
 
-#
-# Online Content Repository
-#
+### cURL
 
-#    The URL for the content repository
+#    Maximum time an interactive request (e.g. server list fetch) may take, stated in milliseconds.
+#    type: int min: 100 max: 2147483647
+# curl_timeout = 20000
+
+#    Limits number of parallel HTTP requests. Affects:
+#    -    Media fetch if server uses remote_media setting.
+#    -    Serverlist download and server announcement.
+#    -    Downloads performed by main menu (e.g. mod manager).
+#    Only has an effect if compiled with cURL.
+#    type: int min: 1 max: 2147483647
+# curl_parallel_limit = 8
+
+#    Maximum time a file download (e.g. a mod download) may take, stated in milliseconds.
+#    type: int min: 100 max: 2147483647
+# curl_file_download_timeout = 300000
+
+### Misc
+
+#    Adjust dpi configuration to your screen (non X11/Android only) e.g. for 4k screens.
+#    type: int min: 1
+# screen_dpi = 72
+
+#    Adjust the detected display density, used for scaling UI elements.
+#    type: float min: 0.5 max: 5
+# display_density_factor = 1
+
+#    Windows systems only: Start Minetest with the command line window in the background.
+#    Contains the same information as the file debug.txt (default name).
+#    type: bool
+# enable_console = false
+
+#    Number of extra blocks that can be loaded by /clearobjects at once.
+#    This is a trade-off between SQLite transaction overhead and
+#    memory consumption (4096=100MB, as a rule of thumb).
+#    type: int min: 0 max: 4294967295
+# max_clearobjects_extra_loaded_blocks = 4096
+
+#    World directory (everything in the world is stored here).
+#    Not needed if starting from the main menu.
+#    type: path
+# map-dir =
+
+#    See https://www.sqlite.org/pragma.html#pragma_synchronous
+#    type: enum values: 0, 1, 2
+# sqlite_synchronous = 2
+
+#    Compression level to use when saving mapblocks to disk.
+#    -1 - use default compression level
+#    0 - least compression, fastest
+#    9 - best compression, slowest
+#    type: int min: -1 max: 9
+# map_compression_level_disk = -1
+
+#    Enable usage of remote media server (if provided by server).
+#    Remote servers offer a significantly faster way to download media (e.g. textures)
+#    when connecting to the server.
+#    type: bool
+# enable_remote_media_server = true
+
+#    File in client/serverlist/ that contains your favorite servers displayed in the
+#    Multiplayer Tab.
 #    type: string
-# contentdb_url = https://content.minetest.net
+# serverlist_file = favoriteservers.json
 
-#    Comma-separated list of flags to hide in the content repository.
-#    "nonfree" can be used to hide packages which do not qualify as 'free software',
-#    as defined by the Free Software Foundation.
-#    You can also specify content ratings.
-#    These flags are independent from Minetest versions,
-#    so see a full list at https://content.minetest.net/help/content_flags/
+## Gamepads
+
+#    Enable joysticks. Requires a restart to take effect
+#    type: bool
+# enable_joysticks = false
+
+#    The identifier of the joystick to use
+#    type: int min: 0 max: 255
+# joystick_id = 0
+
+#    The type of joystick
+#    type: enum values: auto, generic, xbox, dragonrise_gamecube
+# joystick_type = auto
+
+#    The time in seconds it takes between repeated events
+#    when holding down a joystick button combination.
+#    type: float min: 0.001
+# repeat_joystick_button_time = 0.17
+
+#    The dead zone of the joystick
+#    type: int min: 0 max: 65535
+# joystick_deadzone = 2048
+
+#    The sensitivity of the joystick axes for moving the
+#    in-game view frustum around.
+#    type: float min: 0.001
+# joystick_frustum_sensitivity = 170.0
+
+## Temporary Settings
+
+#    Path to texture directory. All textures are first searched from here.
+#    type: path
+# texture_path =
+
+#    Enables minimap.
+#    type: bool
+# enable_minimap = true
+
+#    Shape of the minimap. Enabled = round, disabled = square.
+#    type: bool
+# minimap_shape_round = true
+
+#    Address to connect to.
+#    Leave this blank to start a local server.
+#    Note that the address field in the main menu overrides this setting.
 #    type: string
-# contentdb_flag_blacklist = nonfree, desktop_default
+# address =
 
-#    Maximum number of concurrent downloads. Downloads exceeding this limit will be queued.
-#    This should be lower than curl_parallel_limit.
-#    type: int
-# contentdb_max_concurrent_downloads = 3
+#    Port to connect to (UDP).
+#    Note that the port field in the main menu overrides this setting.
+#    type: int min: 1 max: 65535
+# remote_port = 30000
+
+#    Default game when creating a new world.
+#    This will be overridden when creating a world from the main menu.
+#    type: string
+# default_game = minetest
+
+#    Enable players getting damage and dying.
+#    type: bool
+# enable_damage = false
+
+#    Enable creative mode for all players
+#    type: bool
+# creative_mode = false
+
+#    Whether to allow players to damage and kill each other.
+#    type: bool
+# enable_pvp = true
+
+#    Player is able to fly without being affected by gravity.
+#    This requires the "fly" privilege on the server.
+#    type: bool
+# free_move = false
+
+#    If enabled, makes move directions relative to the player's pitch when flying or swimming.
+#    type: bool
+# pitch_move = false
+
+#    Fast movement (via the "Aux1" key).
+#    This requires the "fast" privilege on the server.
+#    type: bool
+# fast_move = false
+
+#    If enabled together with fly mode, player is able to fly through solid nodes.
+#    This requires the "noclip" privilege on the server.
+#    type: bool
+# noclip = false
+
+#    Continuous forward movement, toggled by autoforward key.
+#    Press the autoforward key again or the backwards movement to disable.
+#    type: bool
+# continuous_forward = false
+
+#    Formspec default background opacity (between 0 and 255).
+#    type: int min: 0 max: 255
+# formspec_default_bg_opacity = 140
+
+#    Formspec default background color (R,G,B).
+#    type: string
+# formspec_default_bg_color = (0,0,0)
+
+#    Whether to show technical names.
+#    Affects mods and texture packs in the Content and Select Mods menus, as well as
+#    setting names in All Settings.
+#    Controlled by the checkbox in the "All settings" menu.
+#    type: bool
+# show_technical_names = false
+
+#    Enables the sound system.
+#    If disabled, this completely disables all sounds everywhere and the in-game
+#    sound controls will be non-functional.
+#    Changing this setting requires a restart.
+#    type: bool
+# enable_sound = true
+
+#    Key for moving the player forward.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_forward = KEY_KEY_W
+
+#    Key for moving the player backward.
+#    Will also disable autoforward, when active.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_backward = KEY_KEY_S
+
+#    Key for moving the player left.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_left = KEY_KEY_A
+
+#    Key for moving the player right.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_right = KEY_KEY_D
+
+#    Key for jumping.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_jump = KEY_SPACE
+
+#    Key for sneaking.
+#    Also used for climbing down and descending in water if aux1_descends is disabled.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_sneak = KEY_LSHIFT
+
+#    Key for digging.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_dig = KEY_LBUTTON
+
+#    Key for placing.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_place = KEY_RBUTTON
+
+#    Key for opening the inventory.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_inventory = KEY_KEY_I
+
+#    Key for moving fast in fast mode.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_aux1 = KEY_KEY_E
+
+#    Key for opening the chat window.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_chat = KEY_KEY_T
+
+#    Key for opening the chat window to type commands.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_cmd = /
+
+#    Key for opening the chat window to type local commands.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_cmd_local = .
+
+#    Key for toggling unlimited view range.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_rangeselect = KEY_KEY_R
+
+#    Key for toggling flying.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_freemove = KEY_KEY_K
+
+#    Key for toggling pitch move mode.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_pitchmove = KEY_KEY_P
+
+#    Key for toggling fast mode.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_fastmove = KEY_KEY_J
+
+#    Key for toggling noclip mode.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_noclip = KEY_KEY_H
+
+#    Key for selecting the next item in the hotbar.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_hotbar_next = KEY_KEY_N
+
+#    Key for selecting the previous item in the hotbar.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_hotbar_previous = KEY_KEY_B
+
+#    Key for muting the game.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_mute = KEY_KEY_M
+
+#    Key for increasing the volume.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_increase_volume =
+
+#    Key for decreasing the volume.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_decrease_volume =
+
+#    Key for toggling autoforward.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_autoforward =
+
+#    Key for toggling cinematic mode.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_cinematic =
+
+#    Key for toggling display of minimap.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_minimap = KEY_KEY_V
+
+#    Key for taking screenshots.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_screenshot = KEY_F12
+
+#    Key for dropping the currently selected item.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_drop = KEY_KEY_Q
+
+#    Key to use view zoom when possible.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_zoom = KEY_KEY_Z
+
+#    Key for selecting the first hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot1 = KEY_KEY_1
+
+#    Key for selecting the second hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot2 = KEY_KEY_2
+
+#    Key for selecting the third hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot3 = KEY_KEY_3
+
+#    Key for selecting the fourth hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot4 = KEY_KEY_4
+
+#    Key for selecting the fifth hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot5 = KEY_KEY_5
+
+#    Key for selecting the sixth hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot6 = KEY_KEY_6
+
+#    Key for selecting the seventh hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot7 = KEY_KEY_7
+
+#    Key for selecting the eighth hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot8 = KEY_KEY_8
+
+#    Key for selecting the ninth hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot9 = KEY_KEY_9
+
+#    Key for selecting the tenth hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot10 = KEY_KEY_0
+
+#    Key for selecting the 11th hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot11 =
+
+#    Key for selecting the 12th hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot12 =
+
+#    Key for selecting the 13th hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot13 =
+
+#    Key for selecting the 14th hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot14 =
+
+#    Key for selecting the 15th hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot15 =
+
+#    Key for selecting the 16th hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot16 =
+
+#    Key for selecting the 17th hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot17 =
+
+#    Key for selecting the 18th hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot18 =
+
+#    Key for selecting the 19th hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot19 =
+
+#    Key for selecting the 20th hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot20 =
+
+#    Key for selecting the 21st hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot21 =
+
+#    Key for selecting the 22nd hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot22 =
+
+#    Key for selecting the 23rd hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot23 =
+
+#    Key for selecting the 24th hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot24 =
+
+#    Key for selecting the 25th hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot25 =
+
+#    Key for selecting the 26th hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot26 =
+
+#    Key for selecting the 27th hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot27 =
+
+#    Key for selecting the 28th hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot28 =
+
+#    Key for selecting the 29th hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot29 =
+
+#    Key for selecting the 30th hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot30 =
+
+#    Key for selecting the 31st hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot31 =
+
+#    Key for selecting the 32nd hotbar slot.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_slot32 =
+
+#    Key for toggling the display of the HUD.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_toggle_hud = KEY_F1
+
+#    Key for toggling the display of chat.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_toggle_chat = KEY_F2
+
+#    Key for toggling the display of the large chat console.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_console = KEY_F10
+
+#    Key for toggling the display of fog.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_toggle_force_fog_off = KEY_F3
+
+#    Key for toggling the camera update. Only used for development
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_toggle_update_camera =
+
+#    Key for toggling the display of debug info.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_toggle_debug = KEY_F5
+
+#    Key for toggling the display of the profiler. Used for development.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_toggle_profiler = KEY_F6
+
+#    Key for switching between first- and third-person camera.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_camera_mode = KEY_KEY_C
+
+#    Key for increasing the viewing range.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_increase_viewing_range_min = +
+
+#    Key for decreasing the viewing range.
+#    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+#    type: key
+# keymap_decrease_viewing_range_min = -