diff options
Diffstat (limited to 'src/map.cpp')
-rw-r--r-- | src/map.cpp | 565 |
1 files changed, 0 insertions, 565 deletions
diff --git a/src/map.cpp b/src/map.cpp index a415bda96..a1502befa 100644 --- a/src/map.cpp +++ b/src/map.cpp @@ -235,571 +235,6 @@ void Map::setNode(v3s16 p, MapNode & n) block->setNodeNoCheck(relpos, n); } -/* - Goes recursively through the neighbours of the node. - - Alters only transparent nodes. - - If the lighting of the neighbour is lower than the lighting of - the node was (before changing it to 0 at the step before), the - lighting of the neighbour is set to 0 and then the same stuff - repeats for the neighbour. - - The ending nodes of the routine are stored in light_sources. - This is useful when a light is removed. In such case, this - routine can be called for the light node and then again for - light_sources to re-light the area without the removed light. - - values of from_nodes are lighting values. -*/ -void Map::unspreadLight(enum LightBank bank, - std::map<v3s16, u8> & from_nodes, - std::set<v3s16> & light_sources, - std::map<v3s16, MapBlock*> & modified_blocks) -{ - v3s16 dirs[6] = { - v3s16(0,0,1), // back - v3s16(0,1,0), // top - v3s16(1,0,0), // right - v3s16(0,0,-1), // front - v3s16(0,-1,0), // bottom - v3s16(-1,0,0), // left - }; - - if(from_nodes.empty()) - return; - - u32 blockchangecount = 0; - - std::map<v3s16, u8> unlighted_nodes; - - /* - Initialize block cache - */ - v3s16 blockpos_last; - MapBlock *block = NULL; - // Cache this a bit, too - bool block_checked_in_modified = false; - - for(std::map<v3s16, u8>::iterator j = from_nodes.begin(); - j != from_nodes.end(); ++j) - { - v3s16 pos = j->first; - v3s16 blockpos = getNodeBlockPos(pos); - - // Only fetch a new block if the block position has changed - try{ - if(block == NULL || blockpos != blockpos_last){ - block = getBlockNoCreate(blockpos); - blockpos_last = blockpos; - - block_checked_in_modified = false; - blockchangecount++; - } - } - catch(InvalidPositionException &e) - { - continue; - } - - if(block->isDummy()) - continue; - - // Calculate relative position in block - //v3s16 relpos = pos - blockpos_last * MAP_BLOCKSIZE; - - // Get node straight from the block - //MapNode n = block->getNode(relpos); - - u8 oldlight = j->second; - - // Loop through 6 neighbors - for(u16 i=0; i<6; i++) - { - // Get the position of the neighbor node - v3s16 n2pos = pos + dirs[i]; - - // Get the block where the node is located - v3s16 blockpos, relpos; - getNodeBlockPosWithOffset(n2pos, blockpos, relpos); - - // Only fetch a new block if the block position has changed - try { - if(block == NULL || blockpos != blockpos_last){ - block = getBlockNoCreate(blockpos); - blockpos_last = blockpos; - - block_checked_in_modified = false; - blockchangecount++; - } - } - catch(InvalidPositionException &e) { - continue; - } - - // Get node straight from the block - bool is_valid_position; - MapNode n2 = block->getNode(relpos, &is_valid_position); - if (!is_valid_position) - continue; - - bool changed = false; - - //TODO: Optimize output by optimizing light_sources? - - /* - If the neighbor is dimmer than what was specified - as oldlight (the light of the previous node) - */ - if(n2.getLight(bank, m_nodedef) < oldlight) - { - /* - And the neighbor is transparent and it has some light - */ - if(m_nodedef->get(n2).light_propagates - && n2.getLight(bank, m_nodedef) != 0) - { - /* - Set light to 0 and add to queue - */ - - u8 current_light = n2.getLight(bank, m_nodedef); - n2.setLight(bank, 0, m_nodedef); - block->setNode(relpos, n2); - - unlighted_nodes[n2pos] = current_light; - changed = true; - - /* - Remove from light_sources if it is there - NOTE: This doesn't happen nearly at all - */ - /*if(light_sources.find(n2pos)) - { - infostream<<"Removed from light_sources"<<std::endl; - light_sources.remove(n2pos); - }*/ - } - - /*// DEBUG - if(light_sources.find(n2pos) != NULL) - light_sources.remove(n2pos);*/ - } - else{ - light_sources.insert(n2pos); - } - - // Add to modified_blocks - if(changed == true && block_checked_in_modified == false) - { - // If the block is not found in modified_blocks, add. - if(modified_blocks.find(blockpos) == modified_blocks.end()) - { - modified_blocks[blockpos] = block; - } - block_checked_in_modified = true; - } - } - } - - /*infostream<<"unspreadLight(): Changed block " - <<blockchangecount<<" times" - <<" for "<<from_nodes.size()<<" nodes" - <<std::endl;*/ - - if(!unlighted_nodes.empty()) - unspreadLight(bank, unlighted_nodes, light_sources, modified_blocks); -} - -/* - Lights neighbors of from_nodes, collects all them and then - goes on recursively. -*/ -void Map::spreadLight(enum LightBank bank, - std::set<v3s16> & from_nodes, - std::map<v3s16, MapBlock*> & modified_blocks) -{ - const v3s16 dirs[6] = { - v3s16(0,0,1), // back - v3s16(0,1,0), // top - v3s16(1,0,0), // right - v3s16(0,0,-1), // front - v3s16(0,-1,0), // bottom - v3s16(-1,0,0), // left - }; - - if(from_nodes.empty()) - return; - - u32 blockchangecount = 0; - - std::set<v3s16> lighted_nodes; - - /* - Initialize block cache - */ - v3s16 blockpos_last; - MapBlock *block = NULL; - // Cache this a bit, too - bool block_checked_in_modified = false; - - for(std::set<v3s16>::iterator j = from_nodes.begin(); - j != from_nodes.end(); ++j) - { - v3s16 pos = *j; - v3s16 blockpos, relpos; - - getNodeBlockPosWithOffset(pos, blockpos, relpos); - - // Only fetch a new block if the block position has changed - try { - if(block == NULL || blockpos != blockpos_last){ - block = getBlockNoCreate(blockpos); - blockpos_last = blockpos; - - block_checked_in_modified = false; - blockchangecount++; - } - } - catch(InvalidPositionException &e) { - continue; - } - - if(block->isDummy()) - continue; - - // Get node straight from the block - bool is_valid_position; - MapNode n = block->getNode(relpos, &is_valid_position); - - u8 oldlight = is_valid_position ? n.getLight(bank, m_nodedef) : 0; - u8 newlight = diminish_light(oldlight); - - // Loop through 6 neighbors - for(u16 i=0; i<6; i++){ - // Get the position of the neighbor node - v3s16 n2pos = pos + dirs[i]; - - // Get the block where the node is located - v3s16 blockpos, relpos; - getNodeBlockPosWithOffset(n2pos, blockpos, relpos); - - // Only fetch a new block if the block position has changed - try { - if(block == NULL || blockpos != blockpos_last){ - block = getBlockNoCreate(blockpos); - blockpos_last = blockpos; - - block_checked_in_modified = false; - blockchangecount++; - } - } - catch(InvalidPositionException &e) { - continue; - } - - // Get node straight from the block - MapNode n2 = block->getNode(relpos, &is_valid_position); - if (!is_valid_position) - continue; - - bool changed = false; - /* - If the neighbor is brighter than the current node, - add to list (it will light up this node on its turn) - */ - if(n2.getLight(bank, m_nodedef) > undiminish_light(oldlight)) - { - lighted_nodes.insert(n2pos); - changed = true; - } - /* - If the neighbor is dimmer than how much light this node - would spread on it, add to list - */ - if(n2.getLight(bank, m_nodedef) < newlight) - { - if(m_nodedef->get(n2).light_propagates) - { - n2.setLight(bank, newlight, m_nodedef); - block->setNode(relpos, n2); - lighted_nodes.insert(n2pos); - changed = true; - } - } - - // Add to modified_blocks - if(changed == true && block_checked_in_modified == false) - { - // If the block is not found in modified_blocks, add. - if(modified_blocks.find(blockpos) == modified_blocks.end()) - { - modified_blocks[blockpos] = block; - } - block_checked_in_modified = true; - } - } - } - - /*infostream<<"spreadLight(): Changed block " - <<blockchangecount<<" times" - <<" for "<<from_nodes.size()<<" nodes" - <<std::endl;*/ - - if(!lighted_nodes.empty()) - spreadLight(bank, lighted_nodes, modified_blocks); -} - -void Map::updateLighting(enum LightBank bank, - std::map<v3s16, MapBlock*> & a_blocks, - std::map<v3s16, MapBlock*> & modified_blocks) -{ - /*m_dout<<"Map::updateLighting(): " - <<a_blocks.size()<<" blocks."<<std::endl;*/ - - //TimeTaker timer("updateLighting"); - - // For debugging - //bool debug=true; - //u32 count_was = modified_blocks.size(); - - //std::map<v3s16, MapBlock*> blocks_to_update; - - std::set<v3s16> light_sources; - - std::map<v3s16, u8> unlight_from; - - int num_bottom_invalid = 0; - - { - //TimeTaker t("first stuff"); - - for(std::map<v3s16, MapBlock*>::iterator i = a_blocks.begin(); - i != a_blocks.end(); ++i) - { - MapBlock *block = i->second; - - for(;;) - { - // Don't bother with dummy blocks. - if(block->isDummy()) - break; - - v3s16 pos = block->getPos(); - v3s16 posnodes = block->getPosRelative(); - modified_blocks[pos] = block; - //blocks_to_update[pos] = block; - - /* - Clear all light from block - */ - for(s16 z=0; z<MAP_BLOCKSIZE; z++) - for(s16 x=0; x<MAP_BLOCKSIZE; x++) - for(s16 y=0; y<MAP_BLOCKSIZE; y++) - { - v3s16 p(x,y,z); - bool is_valid_position; - MapNode n = block->getNode(p, &is_valid_position); - if (!is_valid_position) { - /* This would happen when dealing with a - dummy block. - */ - infostream<<"updateLighting(): InvalidPositionException" - <<std::endl; - continue; - } - u8 oldlight = n.getLight(bank, m_nodedef); - n.setLight(bank, 0, m_nodedef); - block->setNode(p, n); - - // If node sources light, add to list - u8 source = m_nodedef->get(n).light_source; - if(source != 0) - light_sources.insert(p + posnodes); - - // Collect borders for unlighting - if((x==0 || x == MAP_BLOCKSIZE-1 - || y==0 || y == MAP_BLOCKSIZE-1 - || z==0 || z == MAP_BLOCKSIZE-1) - && oldlight != 0) - { - v3s16 p_map = p + posnodes; - unlight_from[p_map] = oldlight; - } - - - } - - if(bank == LIGHTBANK_DAY) - { - bool bottom_valid = block->propagateSunlight(light_sources); - - if(!bottom_valid) - num_bottom_invalid++; - - // If bottom is valid, we're done. - if(bottom_valid) - break; - } - else if(bank == LIGHTBANK_NIGHT) - { - // For night lighting, sunlight is not propagated - break; - } - else - { - assert("Invalid lighting bank" == NULL); - } - - /*infostream<<"Bottom for sunlight-propagated block (" - <<pos.X<<","<<pos.Y<<","<<pos.Z<<") not valid" - <<std::endl;*/ - - // Bottom sunlight is not valid; get the block and loop to it - - pos.Y--; - try{ - block = getBlockNoCreate(pos); - } - catch(InvalidPositionException &e) - { - FATAL_ERROR("Invalid position"); - } - - } - } - - } - - /* - Enable this to disable proper lighting for speeding up map - generation for testing or whatever - */ -#if 0 - //if(g_settings->get("")) - { - core::map<v3s16, MapBlock*>::Iterator i; - i = blocks_to_update.getIterator(); - for(; i.atEnd() == false; i++) - { - MapBlock *block = i.getNode()->getValue(); - v3s16 p = block->getPos(); - block->setLightingExpired(false); - } - return; - } -#endif - -#if 1 - { - //TimeTaker timer("unspreadLight"); - unspreadLight(bank, unlight_from, light_sources, modified_blocks); - } - - /*if(debug) - { - u32 diff = modified_blocks.size() - count_was; - count_was = modified_blocks.size(); - infostream<<"unspreadLight modified "<<diff<<std::endl; - }*/ - - { - //TimeTaker timer("spreadLight"); - spreadLight(bank, light_sources, modified_blocks); - } - - /*if(debug) - { - u32 diff = modified_blocks.size() - count_was; - count_was = modified_blocks.size(); - infostream<<"spreadLight modified "<<diff<<std::endl; - }*/ -#endif - -#if 0 - { - //MapVoxelManipulator vmanip(this); - - // Make a manual voxel manipulator and load all the blocks - // that touch the requested blocks - ManualMapVoxelManipulator vmanip(this); - - { - //TimeTaker timer("initialEmerge"); - - core::map<v3s16, MapBlock*>::Iterator i; - i = blocks_to_update.getIterator(); - for(; i.atEnd() == false; i++) - { - MapBlock *block = i.getNode()->getValue(); - v3s16 p = block->getPos(); - - // Add all surrounding blocks - vmanip.initialEmerge(p - v3s16(1,1,1), p + v3s16(1,1,1)); - - /* - Add all surrounding blocks that have up-to-date lighting - NOTE: This doesn't quite do the job (not everything - appropriate is lighted) - */ - /*for(s16 z=-1; z<=1; z++) - for(s16 y=-1; y<=1; y++) - for(s16 x=-1; x<=1; x++) - { - v3s16 p2 = p + v3s16(x,y,z); - MapBlock *block = getBlockNoCreateNoEx(p2); - if(block == NULL) - continue; - if(block->isDummy()) - continue; - if(block->getLightingExpired()) - continue; - vmanip.initialEmerge(p2, p2); - }*/ - - // Lighting of block will be updated completely - block->setLightingExpired(false); - } - } - - { - //TimeTaker timer("unSpreadLight"); - vmanip.unspreadLight(bank, unlight_from, light_sources, nodemgr); - } - { - //TimeTaker timer("spreadLight"); - vmanip.spreadLight(bank, light_sources, nodemgr); - } - { - //TimeTaker timer("blitBack"); - vmanip.blitBack(modified_blocks); - } - /*infostream<<"emerge_time="<<emerge_time<<std::endl; - emerge_time = 0;*/ - } -#endif - - //m_dout<<"Done ("<<getTimestamp()<<")"<<std::endl; -} - -void Map::updateLighting(std::map<v3s16, MapBlock*> & a_blocks, - std::map<v3s16, MapBlock*> & modified_blocks) -{ - updateLighting(LIGHTBANK_DAY, a_blocks, modified_blocks); - updateLighting(LIGHTBANK_NIGHT, a_blocks, modified_blocks); - - /* - Update information about whether day and night light differ - */ - for(std::map<v3s16, MapBlock*>::iterator - i = modified_blocks.begin(); - i != modified_blocks.end(); ++i) - { - MapBlock *block = i->second; - block->expireDayNightDiff(); - } -} - void Map::addNodeAndUpdate(v3s16 p, MapNode n, std::map<v3s16, MapBlock*> &modified_blocks, bool remove_metadata) |