src/jthread/jmutex.h

/*
Minetest
Copyright (C) 2013 celeron55, Perttu Ahola <celeron55@gmail.com>

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as published by
the Free Software Foundation; either version 2.1 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/

#include "voxel.h"
#include "map.h"
#include "gettime.h"
#include "nodedef.h"
#include "util/timetaker.h"

/*
	Debug stuff
*/
u32 addarea_time = 0;
u32 emerge_time = 0;
u32 emerge_load_time = 0;
u32 clearflag_time = 0;
//u32 getwaterpressure_time = 0;
//u32 spreadwaterpressure_time = 0;
u32 updateareawaterpressure_time = 0;
u32 flowwater_pre_time = 0;


VoxelManipulator::VoxelManipulator():
	m_data(NULL),
	m_flags(NULL)
{
}

VoxelManipulator::~VoxelManipulator()
{
	clear();
	if(m_data)
		delete[] m_data;
	if(m_flags)
		delete[] m_flags;
}

void VoxelManipulator::clear()
{
	// Reset area to volume=0
	m_area = VoxelArea();
	if(m_data)
		delete[] m_data;
	m_data = NULL;
	if(m_flags)
		delete[] m_flags;
	m_flags = NULL;
}

void VoxelManipulator::print(std::ostream &o, INodeDefManager *ndef,
		VoxelPrintMode mode)
{
	v3s16 em = m_area.getExtent();
	v3s16 of = m_area.MinEdge;
	o<<"size: "<<em.X<<"x"<<em.Y<<"x"<<em.Z
	 <<" offset: ("<<of.X<<","<<of.Y<<","<<of.Z<<")"<<std::endl;
	
	for(s32 y=m_area.MaxEdge.Y; y>=m_area.MinEdge.Y; y--)
	{
		if(em.X >= 3 && em.Y >= 3)
		{
			if     (y==m_area.MinEdge.Y+2) o<<"^     ";
			else if(y==m_area.MinEdge.Y+1) o<<"|     ";
			else if(y==m_area.MinEdge.Y+0) o<<"y x-> ";
			else                           o<<"      ";
		}

		for(s32 z=m_area.MinEdge.Z; z<=m_area.MaxEdge.Z; z++)
		{
			for(s32 x=m_area.MinEdge.X; x<=m_area.MaxEdge.X; x++)
			{
				u8 f = m_flags[m_area.index(x,y,z)];
				char c;
				if(f & VOXELFLAG_NOT_LOADED)
					c = 'N';
				else if(f & VOXELFLAG_INEXISTENT)
					c = 'I';
				else
				{
					c = 'X';
					MapNode n = m_data[m_area.index(x,y,z)];
					content_t m = n.getContent();
					u8 pr = n.param2;
					if(mode == VOXELPRINT_MATERIAL)
					{
						if(m <= 9)
							c = m + '0';
					}
					else if(mode == VOXELPRINT_WATERPRESSURE)
					{
						if(ndef->get(m).isLiquid())
						{
							c = 'w';
							if(pr <= 9)
								c = pr + '0';
						}
						else if(m == CONTENT_AIR)
						{
							c = ' ';
						}
						else
						{
							c = '#';
						}
					}
					else if(mode == VOXELPRINT_LIGHT_DAY)
					{
						if(ndef->get(m).light_source != 0)
							c = 'S';
						else if(ndef->get(m).light_propagates == false)
							c = 'X';
						else
						{
							u8 light = n.getLight(LIGHTBANK_DAY, ndef);
							if(light < 10)
								c = '0' + light;
							else
								c = 'a' + (light-10);
						}
					}
				}
				o<<c;
			}
			o<<' ';
		}
		o<<std::endl;
	}
}

void VoxelManipulator::addArea(VoxelArea area)
{
	// Cancel if requested area has zero volume
	if(area.getExtent() == v3s16(0,0,0))
		return;
	
	// Cancel if m_area already contains the requested area
	if(m_area.contains(area))
		return;
	
	TimeTaker timer("addArea", &addarea_time);

	// Calculate new area
	VoxelArea new_area;
	// New area is the requested area if m_area has zero volume
	if(m_area.getExtent() == v3s16(0,0,0))
	{
		new_area = area;
	}
	// Else add requested area to m_area
	else
	{
		new_area = m_area;
		new_area.addArea(area);
	}

	s32 new_size = new_area.getVolume();

	/*dstream<<"adding area ";
	area.print(dstream);
	dstream<<", old area ";
	m_area.print(dstream);
	dstream<<", new area ";
	new_area.print(dstream);
	dstream<<", new_size="<<new_size;
	dstream<<std::endl;*/

	// Allocate and clear new data
	MapNode *new_data = new MapNode[new_size];
	u8 *new_flags = new u8[new_size];
	for(s32 i=0; i<new_size; i++)
	{
		new_flags[i] = VOXELFLAG_NOT_LOADED;
	}
	
	// Copy old data
	
	for(s32 z=m_area.MinEdge.Z; z<=m_area.MaxEdge.Z; z++)
	for(s32 y=m_area.MinEdge.Y; y<=m_area.MaxEdge.Y; y++)
	for(s32 x=m_area.MinEdge.X; x<=m_area.MaxEdge.X; x++)
	{
		// If loaded, copy data and flags
		if((m_flags[m_area.index(x,y,z)] & VOXELFLAG_NOT_LOADED) == false)
		{
			new_data[new_area.index(x,y,z)] = m_data[m_area.index(x,y,z)];
			new_flags[new_area.index(x,y,z)] = m_flags[m_area.index(x,y,z)];
		}
	}

	// Replace area, data and flags
	
	m_area = new_area;
	
	MapNode *old_data = m_data;
	u8 *old_flags = m_flags;

	/*dstream<<"old_data="<<(int)old_data<<", new_data="<<(int)new_data
	<<", old_flags="<<(int)m_flags<<", new_flags="<<(int)new_flags<<std::endl;*/

	m_data = new_data;
	m_flags = new_flags;
	
	if(old_data)
		delete[] old_data;
	if(old_flags)
		delete[] old_flags;

	//dstream<<"addArea done"<<std::endl;
}

void VoxelManipulator::copyFrom(MapNode *src, VoxelArea src_area,
		v3s16 from_pos, v3s16 to_pos, v3s16 size)
{
	for(s16 z=0; z<size.Z; z++)
	for(s16 y=0; y<size.Y; y++)
	{
		s32 i_src = src_area.index(from_pos.X, from_pos.Y+y, from_pos.Z+z);
		s32 i_local = m_area.index(to_pos.X, to_pos.Y+y, to_pos.Z+z);
		memcpy(&m_data[i_local], &src[i_src], size.X*sizeof(MapNode));
		memset(&m_flags[i_local], 0, size.X);
	}
}

void VoxelManipulator::copyTo(MapNode *dst, VoxelArea dst_area,
		v3s16 dst_pos, v3s16 from_pos, v3s16 size)
{
	for(s16 z=0; z<size.Z; z++)
	for(s16 y=0; y<size.Y; y++)
	{
		s32 i_dst = dst_area.index(dst_pos.X, dst_pos.Y+y, dst_pos.Z+z);
		s32 i_local = m_area.index(from_pos.X, from_pos.Y+y, from_pos.Z+z);
		for (s16 x = 0; x < size.X; x++) {
			if (m_data[i_local].getContent() != CONTENT_IGNORE)
				dst[i_dst] = m_data[i_local];
			i_dst++;
			i_local++;
		}
		//memcpy(&dst[i_dst], &m_data[i_local], size.X*sizeof(MapNode));
	}
}

/*
	Algorithms
	-----------------------------------------------------
*/

void VoxelManipulator::clearFlag(u8 flags)
{
	// 0-1ms on moderate area
	TimeTaker timer("clearFlag", &clearflag_time);

	v3s16 s = m_area.getExtent();

	/*dstream<<"clearFlag clearing area of size "
			<<""<<s.X<<"x"<<s.Y<<"x"<<s.Z<<""
			<<std::endl;*/

	//s32 count = 0;

	/*for(s32 z=m_area.MinEdge.Z; z<=m_area.MaxEdge.Z; z++)
	for(s32 y=m_area.MinEdge.Y; y<=m_area.MaxEdge.Y; y++)
	for(s32 x=m_area.MinEdge.X; x<=m_area.MaxEdge.X; x++)
	{
		u8 f = m_flags[m_area.index(x,y,z)];
		m_flags[m_area.index(x,y,z)] &= ~flags;
		if(m_flags[m_area.index(x,y,z)] != f)
			count++;
	}*/

	s32 volume = m_area.getVolume();
	for(s32 i=0; i<volume; i++)
	{
		m_flags[i] &= ~flags;
	}

	/*s32 volume = m_area.getVolume();
	for(s32 i=0; i<volume; i++)
	{
		u8 f = m_flags[i];
		m_flags[i] &= ~flags;
		if(m_flags[i] != f)
			count++;
	}

	dstream<<"clearFlag changed "<<count<<" flags out of "
			<<volume<<" nodes"<<std::endl;*/
}

void VoxelManipulator::unspreadLight(enum LightBank bank, v3s16 p, u8 oldlight,
		std::set<v3s16> & light_sources, INodeDefManager *nodemgr)
{
	v3s16 dirs[6] = {
		v3s16(0,0,1), // back
		v3s16(0,1,0), // top
		v3s16(1,0,0), // right
		v3s16(0,0,-1), // front
		v3s16(0,-1,0), // bottom
		v3s16(-1,0,0), // left
	};
	
	emerge(VoxelArea(p - v3s16(1,1,1), p + v3s16(1,1,1)));

	// Loop through 6 neighbors
	for(u16 i=0; i<6; i++)
	{
		// Get the position of the neighbor node
		v3s16 n2pos = p + dirs[i];
		
		u32 n2i = m_area.index(n2pos);

		if(m_flags[n2i] & VOXELFLAG_INEXISTENT)
			continue;

		MapNode &n2 = m_data[n2i];
		
		/*
			If the neighbor is dimmer than what was specified
			as oldlight (the light of the previous node)
		*/
		u8 light2 = n2.getLight(bank, nodemgr);
		if(light2 < oldlight)
		{
			/*
				And the neighbor is transparent and it has some light
			*/
			if(nodemgr->get(n2).light_propagates && light2 != 0)
			{
				/*
					Set light to 0 and add to queue
				*/

				n2.setLight(bank, 0, nodemgr);
				
				unspreadLight(bank, n2pos, light2, light_sources, nodemgr);
				
				/*
					Remove from light_sources if it is there
					NOTE: This doesn't happen nearly at all
				*/
				/*if(light_sources.find(n2pos))
				{
					std::cout<<"Removed from light_sources"<<std::endl;
					light_sources.remove(n2pos);
				}*/
			}
		}
		else{
			light_sources.insert(n2pos);
		}
	}
}

#if 1
/*
	Goes recursively through the neighbours of the node.

	Alters only transparent nodes.

	If the lighting of the neighbour is lower than the lighting of
	the node was (before changing it to 0 at the step before), the
	lighting of the neighbour is set to 0 and then the same stuff
	repeats for the neighbour.

	The ending nodes of the routine are stored in light_sources.
	This is useful when a light is removed. In such case, this
	routine can be called for the light node and then again for
	light_sources to re-light the area without the removed light.

	values of from_nodes are lighting values.
*/
void VoxelManipulator::unspreadLight(enum LightBank bank,
		std::map<v3s16, u8> & from_nodes,
		std::set<v3s16> & light_sources, INodeDefManager *nodemgr)
{
	if(from_nodes.size() == 0)
		return;
	
	for(std::map<v3s16, u8>::iterator j = from_nodes.begin();
		j != from_nodes.end(); ++j)
	{
		unspreadLight(bank, j->first, j->second, light_sources, nodemgr);
	}
}
#endif

#if 0
/*
	Goes recursively through the neighbours of the node.

	Alters only transparent nodes.

	If the lighting of the neighbour is lower than the lighting of
	the node was (before changing it to 0 at the step before), the
	lighting of the neighbour is set to 0 and then the same stuff
	repeats for the neighbour.

	The ending nodes of the routine are stored in light_sources.
	This is useful when a light is removed. In such case, this
	routine can be called for the light node and then again for
	light_sources to re-light the area without the removed light.

	values of from_nodes are lighting values.
*/
void VoxelManipulator::unspreadLight(enum LightBank bank,
		core::map<v3s16, u8> & from_nodes,
		core::map<v3s16, bool> & light_sources)
{
	v3s16 dirs[6] = {
		v3s16(0,0,1), // back
		v3s16(0,1,0), // top
		v3s16(1,0,0), // right
		v3s16(0,0,-1), // front
		v3s16(0,-1,0), // bottom
		v3s16(-1,0,0), // left
	};
	
	if(from_nodes.size() == 0)
		return;
	
	core::map<v3s16, u8> unlighted_nodes;
	core::map<v3s16, u8>::Iterator j;
	j = from_nodes.getIterator();

	for(; j.atEnd() == false; j++)
	{
		v3s16 pos = j.getNode()->getKey();
		
		emerge(VoxelArea(pos - v3s16(1,1,1), pos + v3s16(1,1,1)));

		//MapNode &n = m_data[m_area.index(pos)];
		
		u8 oldlight = j.getNode()->getValue();
		
		// Loop through 6 neighbors
		for(u16 i=0; i<6; i++)
		{
			// Get the position of the neighbor node
			v3s16 n2pos = pos + dirs[i];
			
			u32 n2i = m_area.index(n2pos);

			if(m_flags[n2i] & VOXELFLAG_INEXISTENT)
				continue;

			MapNode &n2 = m_data[n2i];
			
			/*
				If the neighbor is dimmer than what was specified
				as oldlight (the light of the previous node)
			*/
			if(n2.getLight(bank, nodemgr) < oldlight)
			{
				/*
					And the neighbor is transparent and it has some light
				*/
				if(nodemgr->get(n2).light_propagates && n2.getLight(bank, nodemgr) != 0)
				{
					/*
						Set light to 0 and add to queue
					*/

					u8 current_light = n2.getLight(bank, nodemgr);
					n2.setLight(bank, 0);

					unlighted_nodes.insert(n2pos, current_light);
					
					/*
						Remove from light_sources if it is there
						NOTE: This doesn't happen nearly at all
					*/
					/*if(light_sources.find(n2pos))
					{
						std::cout<<"Removed from light_sources"<<std::endl;
						light_sources.remove(n2pos);
					}*/
				}
			}
			else{
				light_sources.insert(n2pos, true);
			}
		}
	}

	/*dstream<<"unspreadLight(): Changed block "
			<<blockchangecount<<" times"
			<<" for "<<from_nodes.size()<<" nodes"
			<<std::endl;*/
	
	if(unlighted_nodes.size() > 0)
		unspreadLight(bank, unlighted_nodes, light_sources);
}
#endif

void VoxelManipulator::spreadLight(enum LightBank bank, v3s16 p,
		INodeDefManager *nodemgr)
{
	const v3s16 dirs[6] = {
		v3s16(0,0,1), // back
		v3s16(0,1,0), // top
		v3s16(1,0,0), // right
		v3s16(0,0,-1), // front
		v3s16(0,-1,0), // bottom
		v3s16(-1,0,0), // left
	};

	emerge(VoxelArea(p - v3s16(1,1,1), p + v3s16(1,1,1)));

	u32 i = m_area.index(p);
	
	if(m_flags[i] & VOXELFLAG_INEXISTENT)
		return;

	MapNode &n = m_data[i];

	u8 oldlight = n.getLight(bank, nodemgr);
	u8 newlight = diminish_light(oldlight);

	// Loop through 6 neighbors
	for(u16 i=0; i<6; i++)
	{
		// Get the position of the neighbor node
		v3s16 n2pos = p + dirs[i];
		
		u32 n2i = m_area.index(n2pos);

		if(m_flags[n2i] & VOXELFLAG_INEXISTENT)
			continue;

		MapNode &n2 = m_data[n2i];

		u8 light2 = n2.getLight(bank, nodemgr);
		
		/*
			If the neighbor is brighter than the current node,
			add to list (it will light up this node on its turn)
		*/
		if(light2 > undiminish_light(oldlight))
		{
			spreadLight(bank, n2pos, nodemgr);
		}
		/*
			If the neighbor is dimmer than how much light this node
			would spread on it, add to list
		*/
		if(light2 < newlight)
		{
			if(nodemgr->get(n2).light_propagates)
			{
				n2.setLight(bank, newlight, nodemgr);
				spreadLight(bank, n2pos, nodemgr);
			}
		}
	}
}

#if 0
/*
	Lights neighbors of from_nodes, collects all them and then
	goes on recursively.

	NOTE: This is faster on small areas but will overflow the
	      stack on large areas. Thus it is not used.
*/
void VoxelManipulator::spreadLight(enum LightBank bank,
		core::map<v3s16, bool> & from_nodes)
{
	if(from_nodes.size() == 0)
		return;
	
	core::map<v3s16, bool> lighted_nodes;
	core::map<v3s16, bool>::Iterator j;
	j = from_nodes.getIterator();

	for(; j.atEnd() == false; j++)
	{
		v3s16 pos = j.getNode()->getKey();

		spreadLight(bank, pos);
	}
}
#endif

#if 1
/*
	Lights neighbors of from_nodes, collects all them and then
	goes on recursively.
*/
void VoxelManipulator::spreadLight(enum LightBank bank,
		std::set<v3s16> & from_nodes, INodeDefManager *nodemgr)
{
	const v3s16 dirs[6] = {
		v3s16(0,0,1), // back
		v3s16(0,1,0), // top
		v3s16(1,0,0), // right
		v3s16(0,0,-1), // front
		v3s16(0,-1,0), // bottom
		v3s16(-1,0,0), // left
	};

	if(from_nodes.size() == 0)
		return;
	
	std::set<v3s16> lighted_nodes;

	for(std::set<v3s16>::iterator j = from_nodes.begin();
		j != from_nodes.end(); ++j)
	{
		v3s16 pos = *j;

		emerge(VoxelArea(pos - v3s16(1,1,1), pos + v3s16(1,1,1)));

		u32 i = m_area.index(pos);
		
		if(m_flags[i] & VOXELFLAG_INEXISTENT)
			continue;

		MapNode &n = m_data[i];

		u8 oldlight = n.getLight(bank, nodemgr);
		u8 newlight = diminish_light(oldlight);

		// Loop through 6 neighbors
		for(u16 i=0; i<6; i++)
		{
			// Get the position of the neighbor node
			v3s16 n2pos = pos + dirs[i];
			
			try
			{
				u32 n2i = m_area.index(n2pos);

				if(m_flags[n2i] & VOXELFLAG_INEXISTENT)
					continue;

				MapNode &n2 = m_data[n2i];

				u8 light2 = n2.getLight(bank, nodemgr);
				
				/*
					If the neighbor is brighter than the current node,
					add to list (it will light up this node on its turn)
				*/
				if(light2 > undiminish_light(oldlight))
				{
					lighted_nodes.insert(n2pos);
				}
				/*
					If the neighbor is dimmer than how much light this node
					would spread on it, add to list
				*/
				if(light2 < newlight)
				{
					if(nodemgr->get(n2).light_propagates)
					{
						n2.setLight(bank, newlight, nodemgr);
						lighted_nodes.insert(n2pos);
					}
				}
			}
			catch(InvalidPositionException &e)
			{
				continue;
			}
		}
	}

	/*dstream<<"spreadLight(): Changed block "
			<<blockchangecount<<" times"
			<<" for "<<from_nodes.size()<<" nodes"
			<<std::endl;*/
	
	if(lighted_nodes.size() > 0)
		spreadLight(bank, lighted_nodes, nodemgr);
}
#endif

//END
	Commit message (Expand)	Author	Age
*	Cleanup jthread and fix win32 build	sapier	2013-12-01
*	Add support for IPv6	proller	2013-06-23
*	Move scriptapi to separate folder (by sapier)	sapier	2013-05-25
*	Fix build on Windows	kwolekr	2013-02-25
*	Add emerge.cpp, initial EmergeThread changes	kwolekr	2013-02-25
*	Temporary commit; lots of test code and stuff	Perttu Ahola	2011-02-21
*	CMake working on Linux (not on windows)	Perttu Ahola	2011-01-08