aboutsummaryrefslogtreecommitdiff
path: root/advtrains/tracks.lua
diff options
context:
space:
mode:
Diffstat (limited to 'advtrains/tracks.lua')
-rw-r--r--advtrains/tracks.lua1478
1 files changed, 739 insertions, 739 deletions
diff --git a/advtrains/tracks.lua b/advtrains/tracks.lua
index 549363d..60969df 100644
--- a/advtrains/tracks.lua
+++ b/advtrains/tracks.lua
@@ -1,742 +1,742 @@
---advtrains by orwell96, see readme.txt
-
---dev-time settings:
---EDIT HERE
---If the old non-model rails on straight tracks should be replaced by the new...
---false: no
---true: yes
-advtrains.register_replacement_lbms=false
-
---[[TracksDefinition
-nodename_prefix
-texture_prefix
-description
-common={}
-straight={}
-straight45={}
-curve={}
-curve45={}
-lswitchst={}
-lswitchst45={}
-rswitchst={}
-rswitchst45={}
-lswitchcr={}
-lswitchcr45={}
-rswitchcr={}
-rswitchcr45={}
-vert1={
- --you'll probably want to override mesh here
-}
-vert2={
- --you'll probably want to override mesh here
-}
-]]--
-advtrains.all_tracktypes={}
-
---definition preparation
-local function conns(c1, c2, r1, r2) return {{c=c1, y=r1}, {c=c2, y=r2}} end
-local function conns3(c1, c2, c3, r1, r2, r3) return {{c=c1, y=r1}, {c=c2, y=r2}, {c=c3, y=r3}} end
-
-advtrains.ap={}
-advtrains.ap.t_30deg_flat={
- regstep=1,
- variant={
- st={
- conns = conns(0,8),
- desc = "straight",
- tpdouble = true,
- tpsingle = true,
- trackworker = "cr",
- },
- cr={
- conns = conns(0,7),
- desc = "curve",
- tpdouble = true,
- trackworker = "swlst",
- },
- swlst={
- conns = conns3(0,8,7),
- desc = "left switch (straight)",
- trackworker = "swrst",
- switchalt = "cr",
- switchmc = "on",
- switchst = "st",
- switchprefix = "swl",
- },
- swlcr={
- conns = conns3(0,7,8),
- desc = "left switch (curve)",
- trackworker = "swrcr",
- switchalt = "st",
- switchmc = "off",
- switchst = "cr",
- switchprefix = "swl",
- },
- swrst={
- conns = conns3(0,8,9),
- desc = "right switch (straight)",
- trackworker = "st",
- switchalt = "cr",
- switchmc = "on",
- switchst = "st",
- switchprefix = "swr",
- },
- swrcr={
- conns = conns3(0,9,8),
- desc = "right switch (curve)",
- trackworker = "st",
- switchalt = "st",
- switchmc = "off",
- switchst = "cr",
- switchprefix = "swr",
- },
- },
- regtp=true,
- tpdefault="st",
- trackworker={
- ["swrcr"]="st",
- ["swrst"]="st",
- ["cr"]="swlst",
- ["swlcr"]="swrcr",
- ["swlst"]="swrst",
- },
- rotation={"", "_30", "_45", "_60"},
-}
-advtrains.ap.t_yturnout={
- regstep=1,
- variant={
- l={
- conns = conns3(0,7,9),
- desc = "Y-turnout (left)",
- switchalt = "r",
- switchmc = "off",
- switchst = "l",
- switchprefix = "",
- },
- r={
- conns = conns3(0,9,7),
- desc = "Y-turnout (right)",
- switchalt = "l",
- switchmc = "on",
- switchst = "r",
- switchprefix = "",
- }
- },
- regtp=true,
- tpdefault="l",
- rotation={"", "_30", "_45", "_60"},
-}
-advtrains.ap.t_s3way={
- regstep=1,
- variant={
- l={
+--advtrains by orwell96, see readme.txt
+
+--dev-time settings:
+--EDIT HERE
+--If the old non-model rails on straight tracks should be replaced by the new...
+--false: no
+--true: yes
+advtrains.register_replacement_lbms=false
+
+--[[TracksDefinition
+nodename_prefix
+texture_prefix
+description
+common={}
+straight={}
+straight45={}
+curve={}
+curve45={}
+lswitchst={}
+lswitchst45={}
+rswitchst={}
+rswitchst45={}
+lswitchcr={}
+lswitchcr45={}
+rswitchcr={}
+rswitchcr45={}
+vert1={
+ --you'll probably want to override mesh here
+}
+vert2={
+ --you'll probably want to override mesh here
+}
+]]--
+advtrains.all_tracktypes={}
+
+--definition preparation
+local function conns(c1, c2, r1, r2) return {{c=c1, y=r1}, {c=c2, y=r2}} end
+local function conns3(c1, c2, c3, r1, r2, r3) return {{c=c1, y=r1}, {c=c2, y=r2}, {c=c3, y=r3}} end
+
+advtrains.ap={}
+advtrains.ap.t_30deg_flat={
+ regstep=1,
+ variant={
+ st={
+ conns = conns(0,8),
+ desc = "straight",
+ tpdouble = true,
+ tpsingle = true,
+ trackworker = "cr",
+ },
+ cr={
+ conns = conns(0,7),
+ desc = "curve",
+ tpdouble = true,
+ trackworker = "swlst",
+ },
+ swlst={
+ conns = conns3(0,8,7),
+ desc = "left switch (straight)",
+ trackworker = "swrst",
+ switchalt = "cr",
+ switchmc = "on",
+ switchst = "st",
+ switchprefix = "swl",
+ },
+ swlcr={
+ conns = conns3(0,7,8),
+ desc = "left switch (curve)",
+ trackworker = "swrcr",
+ switchalt = "st",
+ switchmc = "off",
+ switchst = "cr",
+ switchprefix = "swl",
+ },
+ swrst={
+ conns = conns3(0,8,9),
+ desc = "right switch (straight)",
+ trackworker = "st",
+ switchalt = "cr",
+ switchmc = "on",
+ switchst = "st",
+ switchprefix = "swr",
+ },
+ swrcr={
+ conns = conns3(0,9,8),
+ desc = "right switch (curve)",
+ trackworker = "st",
+ switchalt = "st",
+ switchmc = "off",
+ switchst = "cr",
+ switchprefix = "swr",
+ },
+ },
+ regtp=true,
+ tpdefault="st",
+ trackworker={
+ ["swrcr"]="st",
+ ["swrst"]="st",
+ ["cr"]="swlst",
+ ["swlcr"]="swrcr",
+ ["swlst"]="swrst",
+ },
+ rotation={"", "_30", "_45", "_60"},
+}
+advtrains.ap.t_yturnout={
+ regstep=1,
+ variant={
+ l={
+ conns = conns3(0,7,9),
+ desc = "Y-turnout (left)",
+ switchalt = "r",
+ switchmc = "off",
+ switchst = "l",
+ switchprefix = "",
+ },
+ r={
+ conns = conns3(0,9,7),
+ desc = "Y-turnout (right)",
+ switchalt = "l",
+ switchmc = "on",
+ switchst = "r",
+ switchprefix = "",
+ }
+ },
+ regtp=true,
+ tpdefault="l",
+ rotation={"", "_30", "_45", "_60"},
+}
+advtrains.ap.t_s3way={
+ regstep=1,
+ variant={
+ l={
conns = { {c=0}, {c=7}, {c=8}, {c=9}, {c=0} },
- desc = "3-way turnout (left)",
- switchalt = "s",
- switchst="l",
- switchprefix = "",
- },
- s={
+ desc = "3-way turnout (left)",
+ switchalt = "s",
+ switchst="l",
+ switchprefix = "",
+ },
+ s={
conns = { {c=0}, {c=8}, {c=7}, {c=9}, {c=0} },
- desc = "3-way turnout (straight)",
- switchalt ="r",
- switchst = "s",
- switchprefix = "",
- },
- r={
+ desc = "3-way turnout (straight)",
+ switchalt ="r",
+ switchst = "s",
+ switchprefix = "",
+ },
+ r={
conns = { {c=0}, {c=9}, {c=8}, {c=7}, {c=0} },
- desc = "3-way turnout (right)",
- switchalt = "l",
- switchst="r",
- switchprefix = "",
- }
- },
- regtp=true,
- tpdefault="l",
- rotation={"", "_30", "_45", "_60"},
-}
-advtrains.ap.t_30deg_slope={
- regstep=1,
- variant={
- vst1={conns = conns(8,0,0,0.5), rail_y = 0.25, desc = "steep uphill 1/2", slope=true},
- vst2={conns = conns(8,0,0.5,1), rail_y = 0.75, desc = "steep uphill 2/2", slope=true},
- vst31={conns = conns(8,0,0,0.33), rail_y = 0.16, desc = "uphill 1/3", slope=true},
- vst32={conns = conns(8,0,0.33,0.66), rail_y = 0.5, desc = "uphill 2/3", slope=true},
- vst33={conns = conns(8,0,0.66,1), rail_y = 0.83, desc = "uphill 3/3", slope=true},
- },
- regsp=true,
- slopeplacer={
- [2]={"vst1", "vst2"},
- [3]={"vst31", "vst32", "vst33"},
- max=3,--highest entry
- },
- slopeplacer_45={
- [2]={"vst1_45", "vst2_45"},
- max=2,
- },
- rotation={"", "_30", "_45", "_60"},
- trackworker={},
- increativeinv={},
-}
-advtrains.ap.t_30deg_straightonly={
- regstep=1,
- variant={
- st={
- conns = conns(0,8),
- desc = "straight",
- tpdouble = true,
- tpsingle = true,
- trackworker = "st",
- },
- },
- regtp=true,
- tpdefault="st",
- rotation={"", "_30", "_45", "_60"},
-}
-advtrains.ap.t_30deg_straightonly_noplacer={
- regstep=1,
- variant={
- st={
- conns = conns(0,8),
- desc = "straight",
- tpdouble = true,
- tpsingle = true,
- trackworker = "st",
- },
- },
- tpdefault="st",
- rotation={"", "_30", "_45", "_60"},
-}
-advtrains.ap.t_45deg={
- regstep=2,
- variant={
- st={
- conns = conns(0,8),
- desc = "straight",
- tpdouble = true,
- tpsingle = true,
- trackworker = "cr",
- },
- cr={
- conns = conns(0,6),
- desc = "curve",
- tpdouble = true,
- trackworker = "swlst",
- },
- swlst={
- conns = conns3(0,8,6),
- desc = "left switch (straight)",
- trackworker = "swrst",
- switchalt = "cr",
- switchmc = "on",
- switchst = "st",
- },
- swlcr={
- conns = conns3(0,6,8),
- desc = "left switch (curve)",
- trackworker = "swrcr",
- switchalt = "st",
- switchmc = "off",
- switchst = "cr",
- },
- swrst={
- conns = conns3(0,8,10),
- desc = "right switch (straight)",
- trackworker = "st",
- switchalt = "cr",
- switchmc = "on",
- switchst = "st",
- },
- swrcr={
- conns = conns3(0,10,8),
- desc = "right switch (curve)",
- trackworker = "st",
- switchalt = "st",
- switchmc = "off",
- switchst = "cr",
- },
- },
- regtp=true,
- tpdefault="st",
- trackworker={
- ["swrcr"]="st",
- ["swrst"]="st",
- ["cr"]="swlst",
- ["swlcr"]="swrcr",
- ["swlst"]="swrst",
- },
- rotation={"", "_30", "_45", "_60"},
-}
-advtrains.ap.t_perpcrossing={
- regstep = 1,
- variant={
- st={
- conns = { {c=0}, {c=8}, {c=4}, {c=12} },
- desc = "perpendicular crossing",
- tpdouble = true,
- tpsingle = true,
- trackworker = "st",
- },
- },
- regtp=true,
- tpdefault="st",
- rotation={"", "_30", "_45", "_60"},
-}
-advtrains.ap.t_90plusx_crossing={
- regstep = 1,
- variant={
- ["30l"]={
- conns = { {c=0}, {c=8}, {c=1}, {c=9} },
- desc = "30/90 degree crossing (left)",
- tpdouble = true,
- tpsingle = true,
- trackworker = "45l"
- },
- ["45l"]={
- conns = { {c=0}, {c=8}, {c=2}, {c=10} },
- desc = "45/90 degree crossing (left)",
- tpdouble = true,
- tpsingle = true,
- trackworker = "60l",
- },
- ["60l"]={
- conns = { {c=0}, {c=8}, {c=3}, {c=11}},
- desc = "60/90 degree crossing (left)",
- tpdouble = true,
- tpsingle = true,
- trackworker = "60r",
- },
- ["60r"]={
- conns = { {c=0}, {c=8}, {c=7}, {c=15} },
- desc = "60/90 degree crossing (right)",
- tpdouble = true,
- tpsingle = true,
- trackworker = "45r"
- },
- ["45r"]={
- conns = { {c=0}, {c=8}, {c=6}, {c=14} },
- desc = "45/90 degree crossing (right)",
- tpdouble = true,
- tpsingle = true,
- trackworker = "30r",
- },
- ["30r"]={
- conns = { {c=0}, {c=8}, {c=7}, {c=15}},
- desc = "30/90 degree crossing (right)",
- tpdouble = true,
- tpsingle = true,
- trackworker = "30l",
- },
- },
- regtp=true,
- tpdefault="30l",
- rotation={""},
- trackworker = {
- ["30l"] = "45l",
- ["45l"] = "60l",
- ["60l"] = "60r",
- ["60r"] = "45r",
- ["45r"] = "30r",
- ["30r"] = "30l",
- }
-}
-
-advtrains.ap.t_diagonalcrossing = {
- regstep=1,
- variant={
- ["30l45r"]={
- conns = {{c=1}, {c=9}, {c=6}, {c=14}},
- desc = "30left-45right diagonal crossing",
- tpdouble=true,
- tpsingle=true,
- trackworker="60l30l",
- },
- ["60l30l"]={
- conns = {{c=3}, {c=11}, {c=1}, {c=9}},
- desc = "30left-60right diagonal crossing",
- tpdouble=true,
- tpsingle=true,
- trackworker="60l45r"
- },
- ["60l45r"]={
- conns = {{c=3}, {c=11}, {c=6}, {c=14}},
- desc = "60left-45right diagonal crossing",
- tpdouble=true,
- tpsingle=true,
- trackworker="60l60r"
- },
- ["60l60r"]={
- conns = {{c=3}, {c=11}, {c=5}, {c=13}},
- desc = "60left-60right diagonal crossing",
- tpdouble=true,
- tpsingle=true,
- trackworker="60r45l",
- },
- --If 60l60r had a mirror image, it would be here, but it's symmetric.
- -- 60l60r is also equivalent to 30l30r but rotated 90 degrees.
- ["60r45l"]={
- conns = {{c=5}, {c=13}, {c=2}, {c=10}},
- desc = "60right-45left diagonal crossing",
- tpdouble=true,
- tpsingle=true,
- trackworker="60r30r",
- },
- ["60r30r"]={
- conns = {{c=5}, {c=13}, {c=7}, {c=15}},
- desc = "60right-30right diagonal crossing",
- tpdouble=true,
- tpsingle=true,
- trackworker="30r45l",
- },
- ["30r45l"]={
- conns = {{c=7}, {c=15}, {c=2}, {c=10}},
- desc = "30right-45left diagonal crossing",
- tpdouble=true,
- tpsingle=true,
- trackworker="30l45r",
- },
-
- },
- regtp=true,
- tpdefault="30l45r",
- rotation={""},
- trackworker = {
- ["30l45r"] = "60l30l",
- ["60l30l"] = "60l45r",
- ["60l45r"] = "60l60r",
- ["60l60r"] = "60r45l",
- ["60r45l"] = "60r30r",
- ["60r30r"] = "30r45l",
- ["30r45l"] = "30l45r",
- }
-}
-
-advtrains.trackpresets = advtrains.ap
-
---definition format: ([] optional)
---[[{
- nodename_prefix
- texture_prefix
- [shared_texture]
- models_prefix
- models_suffix (with dot)
- [shared_model]
- formats={
- st,cr,swlst,swlcr,swrst,swrcr,vst1,vst2
- (each a table with indices 0-3, for if to register a rail with this 'rotation' table entry. nil is assumed as 'all', set {} to not register at all)
- }
- common={} change something on common rail appearance
-}
-[18.12.17] Note on new connection system:
-In order to support real rail crossing nodes and finally make the trackplacer respect switches, I changed the connection system.
-There can be a variable number of connections available. These are specified as tuples {c=<connection>, y=<rely>}
-The table "at_conns" consists of {<conn1>, <conn2>...}
-the "at_rail_y" property holds the value that was previously called "railheight"
-Depending on the number of connections:
-2 conns: regular rail
-3 conns: switch:
- - when train passes in at conn1, will move out of conn2
- - when train passes in at conn2 or conn3, will move out of conn1
-4 conns: cross (or cross switch, depending on arrangement of conns):
- - conn1 <> conn2
- - conn3 <> conn4
-]]
-
-function advtrains.register_tracks(tracktype, def, preset)
- advtrains.trackplacer.register_tracktype(def.nodename_prefix, preset.tpdefault)
- if preset.regtp then
- advtrains.trackplacer.register_track_placer(def.nodename_prefix, def.texture_prefix, def.description, def)
- end
- if preset.regsp then
- advtrains.slope.register_placer(def, preset)
- end
- for suffix, var in pairs(preset.variant) do
- for rotid, rotation in ipairs(preset.rotation) do
- if not def.formats[suffix] or def.formats[suffix][rotid] then
- local img_suffix = suffix..rotation
- local ndef = advtrains.merge_tables({
- description=def.description.."("..(var.desc or "any")..rotation..")",
- drawtype = "mesh",
- paramtype="light",
- paramtype2="facedir",
- walkable = false,
- selection_box = {
- type = "fixed",
- fixed = {-1/2, -1/2, -1/2, 1/2, -1/2+1/16, 1/2},
- },
-
- mesh = def.shared_model or (def.models_prefix.."_"..img_suffix..def.models_suffix),
- tiles = {def.shared_texture or (def.texture_prefix.."_"..img_suffix..".png"), def.second_texture},
-
- groups = {
- attached_node=1,
- advtrains_track=1,
- ["advtrains_track_"..tracktype]=1,
- save_in_at_nodedb=1,
- dig_immediate=2,
- not_in_creative_inventory=1,
- not_blocking_trains=1,
- },
-
- can_dig = advtrains.can_dig_or_modify_track,
- after_dig_node=function(pos)
- advtrains.ndb.update(pos)
- end,
- after_place_node=function(pos)
- advtrains.ndb.update(pos)
- end,
- at_nnpref = def.nodename_prefix,
- at_suffix = suffix,
- at_rotation = rotation,
- at_rail_y = var.rail_y
- }, def.common or {})
-
- if preset.regtp then
- ndef.drop = def.nodename_prefix.."_placer"
- end
- if preset.regsp and var.slope then
- ndef.drop = def.nodename_prefix.."_slopeplacer"
- end
-
- --connections
- ndef.at_conns = advtrains.rotate_conn_by(var.conns, (rotid-1)*preset.regstep)
-
- local ndef_avt_table
-
- if var.switchalt and var.switchst then
- local switchfunc=function(pos, node, newstate)
- newstate = newstate or var.switchalt -- support for 3 (or more) state switches
- -- this code is only called from the internal setstate function, which
- -- ensures that it is safe to switch the turnout
- if newstate~=var.switchst then
- advtrains.ndb.swap_node(pos, {name=def.nodename_prefix.."_"..(var.switchprefix or "")..newstate..rotation, param2=node.param2})
- advtrains.invalidate_all_paths(pos)
- end
- end
- ndef.on_rightclick = function(pos, node, player)
- if advtrains.check_turnout_signal_protection(pos, player:get_player_name()) then
- advtrains.setstate(pos, newstate, node)
- advtrains.log("Switch", player:get_player_name(), pos)
- end
- end
- if var.switchmc then
- ndef.mesecons = {effector = {
- ["action_"..var.switchmc] = function(pos, node)
- advtrains.setstate(pos, nil, node)
- end,
- rules=advtrains.meseconrules
- }}
- end
- ndef_avt_table = {
- getstate = var.switchst,
- setstate = switchfunc,
- }
- end
-
- local adef={}
- if def.get_additional_definiton then
- adef=def.get_additional_definiton(def, preset, suffix, rotation)
- end
- ndef = advtrains.merge_tables(ndef, adef)
-
- -- insert getstate/setstate functions after merging the additional definitions
- if ndef_avt_table then
- ndef.advtrains = advtrains.merge_tables(ndef.advtrains or {}, ndef_avt_table)
- end
-
- minetest.register_node(":"..def.nodename_prefix.."_"..suffix..rotation, ndef)
- --trackplacer
- if preset.regtp then
- local tpconns = {conn1=ndef.at_conns[1].c, conn2=ndef.at_conns[2].c}
- if var.tpdouble then
- advtrains.trackplacer.add_double_conn(def.nodename_prefix, suffix, rotation, tpconns)
- end
- if var.tpsingle then
- advtrains.trackplacer.add_single_conn(def.nodename_prefix, suffix, rotation, tpconns)
- end
- end
- advtrains.trackplacer.add_worked(def.nodename_prefix, suffix, rotation, var.trackworker)
- end
- end
- end
- advtrains.all_tracktypes[tracktype]=true
-end
-
-function advtrains.is_track_and_drives_on(nodename, drives_on_p)
- local drives_on = drives_on_p
- if not drives_on then drives_on = advtrains.all_tracktypes end
- local hasentry = false
- for _,_ in pairs(drives_on) do
- hasentry=true
- end
- if not hasentry then drives_on = advtrains.all_tracktypes end
-
- if not minetest.registered_nodes[nodename] then
- return false
- end
- local nodedef=minetest.registered_nodes[nodename]
- for k,v in pairs(drives_on) do
- if nodedef.groups["advtrains_track_"..k] then
- return true
- end
- end
- return false
-end
-
-function advtrains.get_track_connections(name, param2)
- local nodedef=minetest.registered_nodes[name]
- if not nodedef then atprint(" get_track_connections couldn't find nodedef for nodename "..(name or "nil")) return nil end
- local noderot=param2
- if not param2 then noderot=0 end
- if noderot > 3 then atprint(" get_track_connections: rail has invaild param2 of "..noderot) noderot=0 end
-
- local tracktype
- for k,_ in pairs(nodedef.groups) do
- local tt=string.match(k, "^advtrains_track_(.+)$")
- if tt then
- tracktype=tt
- end
- end
- return advtrains.rotate_conn_by(nodedef.at_conns, noderot*AT_CMAX/4), (nodedef.at_rail_y or 0), tracktype
-end
-
--- Function called when a track is about to be dug or modified by the trackworker
--- Returns either true (ok) or false,"translated string describing reason why it isn't allowed"
-function advtrains.can_dig_or_modify_track(pos)
- if advtrains.get_train_at_pos(pos) then
- return false, attrans("Position is occupied by a train.")
- end
- -- interlocking: tcb, signal IP a.s.o.
- if advtrains.interlocking then
- -- TCB?
- if advtrains.interlocking.db.get_tcb(pos) then
- return false, attrans("There's a Track Circuit Break here.")
- end
- -- signal ip?
- if advtrains.interlocking.db.is_ip_at(pos) then
- return false, attrans("There's a Signal Influence Point here.")
- end
- end
- return true
-end
-
--- slope placer. Defined in register_tracks.
---crafted with rail and gravel
-local sl={}
-function sl.register_placer(def, preset)
- minetest.register_craftitem(":"..def.nodename_prefix.."_slopeplacer",{
- description = attrans("@1 Slope", def.description),
- inventory_image = def.texture_prefix.."_slopeplacer.png",
- wield_image = def.texture_prefix.."_slopeplacer.png",
- groups={},
- on_place = sl.create_slopeplacer_on_place(def, preset)
- })
-end
---(itemstack, placer, pointed_thing)
-function sl.create_slopeplacer_on_place(def, preset)
- return function(istack, player, pt)
- if not pt.type=="node" then
- minetest.chat_send_player(player:get_player_name(), attrans("Can't place: not pointing at node"))
- return istack
- end
- local pos=pt.above
- if not pos then
- minetest.chat_send_player(player:get_player_name(), attrans("Can't place: not pointing at node"))
- return istack
- end
- local node=minetest.get_node(pos)
- if not minetest.registered_nodes[node.name] or not minetest.registered_nodes[node.name].buildable_to then
- minetest.chat_send_player(player:get_player_name(), attrans("Can't place: space occupied!"))
- return istack
- end
- if not advtrains.check_track_protection(pos, player:get_player_name()) then
- minetest.record_protection_violation(pos, player:get_player_name())
- return istack
- end
- --determine player orientation (only horizontal component)
- --get_look_horizontal may not be available
- local yaw=player.get_look_horizontal and player:get_look_horizontal() or (player:get_look_yaw() - math.pi/2)
-
- --rounding unit vectors is a nice way for selecting 1 of 8 directions since sin(30°) is 0.5.
- dirvec={x=math.floor(math.sin(-yaw)+0.5), y=0, z=math.floor(math.cos(-yaw)+0.5)}
- --translate to direction to look up inside the preset table
- local param2, rot45=({
- [-1]={
- [-1]=2,
- [0]=3,
- [1]=3,
- },
- [0]={
- [-1]=2,
- [1]=0,
- },
- [1]={
- [-1]=1,
- [0]=1,
- [1]=0,
- },
- })[dirvec.x][dirvec.z], dirvec.x~=0 and dirvec.z~=0
- local lookup=preset.slopeplacer
- if rot45 then lookup=preset.slopeplacer_45 end
-
- --go unitvector forward and look how far the next node is
- local step=1
- while step<=lookup.max do
- local node=minetest.get_node(vector.add(pos, dirvec))
- --next node solid?
- if not minetest.registered_nodes[node.name] or not minetest.registered_nodes[node.name].buildable_to or advtrains.is_protected(pos, player:get_player_name()) then
- --do slopes of this distance exist?
- if lookup[step] then
- if minetest.settings:get_bool("creative_mode") or istack:get_count()>=step then
- --start placing
- local placenodes=lookup[step]
- while step>0 do
- minetest.set_node(pos, {name=def.nodename_prefix.."_"..placenodes[step], param2=param2})
- if not minetest.settings:get_bool("creative_mode") then
- istack:take_item()
- end
- step=step-1
- pos=vector.subtract(pos, dirvec)
- end
- else
- minetest.chat_send_player(player:get_player_name(), attrans("Can't place: Not enough slope items left (@1 required)", step))
- end
- else
- minetest.chat_send_player(player:get_player_name(), attrans("Can't place: There's no slope of length @1",step))
- end
- return istack
- end
- step=step+1
- pos=vector.add(pos, dirvec)
- end
- minetest.chat_send_player(player:get_player_name(), attrans("Can't place: no supporting node at upper end."))
- return itemstack
- end
-end
-
-advtrains.slope=sl
-
---END code, BEGIN definition
---definition format: ([] optional)
---[[{
- nodename_prefix
- texture_prefix
- [shared_texture]
- models_prefix
- models_suffix (with dot)
- [shared_model]
- formats={
- st,cr,swlst,swlcr,swrst,swrcr,vst1,vst2
- (each a table with indices 0-3, for if to register a rail with this 'rotation' table entry. nil is assumed as 'all', set {} to not register at all)
- }
- common={} change something on common rail appearance
-}]]
-
-
-
-
-
-
-
-
-
+ desc = "3-way turnout (right)",
+ switchalt = "l",
+ switchst="r",
+ switchprefix = "",
+ }
+ },
+ regtp=true,
+ tpdefault="l",
+ rotation={"", "_30", "_45", "_60"},
+}
+advtrains.ap.t_30deg_slope={
+ regstep=1,
+ variant={
+ vst1={conns = conns(8,0,0,0.5), rail_y = 0.25, desc = "steep uphill 1/2", slope=true},
+ vst2={conns = conns(8,0,0.5,1), rail_y = 0.75, desc = "steep uphill 2/2", slope=true},
+ vst31={conns = conns(8,0,0,0.33), rail_y = 0.16, desc = "uphill 1/3", slope=true},
+ vst32={conns = conns(8,0,0.33,0.66), rail_y = 0.5, desc = "uphill 2/3", slope=true},
+ vst33={conns = conns(8,0,0.66,1), rail_y = 0.83, desc = "uphill 3/3", slope=true},
+ },
+ regsp=true,
+ slopeplacer={
+ [2]={"vst1", "vst2"},
+ [3]={"vst31", "vst32", "vst33"},
+ max=3,--highest entry
+ },
+ slopeplacer_45={
+ [2]={"vst1_45", "vst2_45"},
+ max=2,
+ },
+ rotation={"", "_30", "_45", "_60"},
+ trackworker={},
+ increativeinv={},
+}
+advtrains.ap.t_30deg_straightonly={
+ regstep=1,
+ variant={
+ st={
+ conns = conns(0,8),
+ desc = "straight",
+ tpdouble = true,
+ tpsingle = true,
+ trackworker = "st",
+ },
+ },
+ regtp=true,
+ tpdefault="st",
+ rotation={"", "_30", "_45", "_60"},
+}
+advtrains.ap.t_30deg_straightonly_noplacer={
+ regstep=1,
+ variant={
+ st={
+ conns = conns(0,8),
+ desc = "straight",
+ tpdouble = true,
+ tpsingle = true,
+ trackworker = "st",
+ },
+ },
+ tpdefault="st",
+ rotation={"", "_30", "_45", "_60"},
+}
+advtrains.ap.t_45deg={
+ regstep=2,
+ variant={
+ st={
+ conns = conns(0,8),
+ desc = "straight",
+ tpdouble = true,
+ tpsingle = true,
+ trackworker = "cr",
+ },
+ cr={
+ conns = conns(0,6),
+ desc = "curve",
+ tpdouble = true,
+ trackworker = "swlst",
+ },
+ swlst={
+ conns = conns3(0,8,6),
+ desc = "left switch (straight)",
+ trackworker = "swrst",
+ switchalt = "cr",
+ switchmc = "on",
+ switchst = "st",
+ },
+ swlcr={
+ conns = conns3(0,6,8),
+ desc = "left switch (curve)",
+ trackworker = "swrcr",
+ switchalt = "st",
+ switchmc = "off",
+ switchst = "cr",
+ },
+ swrst={
+ conns = conns3(0,8,10),
+ desc = "right switch (straight)",
+ trackworker = "st",
+ switchalt = "cr",
+ switchmc = "on",
+ switchst = "st",
+ },
+ swrcr={
+ conns = conns3(0,10,8),
+ desc = "right switch (curve)",
+ trackworker = "st",
+ switchalt = "st",
+ switchmc = "off",
+ switchst = "cr",
+ },
+ },
+ regtp=true,
+ tpdefault="st",
+ trackworker={
+ ["swrcr"]="st",
+ ["swrst"]="st",
+ ["cr"]="swlst",
+ ["swlcr"]="swrcr",
+ ["swlst"]="swrst",
+ },
+ rotation={"", "_30", "_45", "_60"},
+}
+advtrains.ap.t_perpcrossing={
+ regstep = 1,
+ variant={
+ st={
+ conns = { {c=0}, {c=8}, {c=4}, {c=12} },
+ desc = "perpendicular crossing",
+ tpdouble = true,
+ tpsingle = true,
+ trackworker = "st",
+ },
+ },
+ regtp=true,
+ tpdefault="st",
+ rotation={"", "_30", "_45", "_60"},
+}
+advtrains.ap.t_90plusx_crossing={
+ regstep = 1,
+ variant={
+ ["30l"]={
+ conns = { {c=0}, {c=8}, {c=1}, {c=9} },
+ desc = "30/90 degree crossing (left)",
+ tpdouble = true,
+ tpsingle = true,
+ trackworker = "45l"
+ },
+ ["45l"]={
+ conns = { {c=0}, {c=8}, {c=2}, {c=10} },
+ desc = "45/90 degree crossing (left)",
+ tpdouble = true,
+ tpsingle = true,
+ trackworker = "60l",
+ },
+ ["60l"]={
+ conns = { {c=0}, {c=8}, {c=3}, {c=11}},
+ desc = "60/90 degree crossing (left)",
+ tpdouble = true,
+ tpsingle = true,
+ trackworker = "60r",
+ },
+ ["60r"]={
+ conns = { {c=0}, {c=8}, {c=7}, {c=15} },
+ desc = "60/90 degree crossing (right)",
+ tpdouble = true,
+ tpsingle = true,
+ trackworker = "45r"
+ },
+ ["45r"]={
+ conns = { {c=0}, {c=8}, {c=6}, {c=14} },
+ desc = "45/90 degree crossing (right)",
+ tpdouble = true,
+ tpsingle = true,
+ trackworker = "30r",
+ },
+ ["30r"]={
+ conns = { {c=0}, {c=8}, {c=7}, {c=15}},
+ desc = "30/90 degree crossing (right)",
+ tpdouble = true,
+ tpsingle = true,
+ trackworker = "30l",
+ },
+ },
+ regtp=true,
+ tpdefault="30l",
+ rotation={""},
+ trackworker = {
+ ["30l"] = "45l",
+ ["45l"] = "60l",
+ ["60l"] = "60r",
+ ["60r"] = "45r",
+ ["45r"] = "30r",
+ ["30r"] = "30l",
+ }
+}
+
+advtrains.ap.t_diagonalcrossing = {
+ regstep=1,
+ variant={
+ ["30l45r"]={
+ conns = {{c=1}, {c=9}, {c=6}, {c=14}},
+ desc = "30left-45right diagonal crossing",
+ tpdouble=true,
+ tpsingle=true,
+ trackworker="60l30l",
+ },
+ ["60l30l"]={
+ conns = {{c=3}, {c=11}, {c=1}, {c=9}},
+ desc = "30left-60right diagonal crossing",
+ tpdouble=true,
+ tpsingle=true,
+ trackworker="60l45r"
+ },
+ ["60l45r"]={
+ conns = {{c=3}, {c=11}, {c=6}, {c=14}},
+ desc = "60left-45right diagonal crossing",
+ tpdouble=true,
+ tpsingle=true,
+ trackworker="60l60r"
+ },
+ ["60l60r"]={
+ conns = {{c=3}, {c=11}, {c=5}, {c=13}},
+ desc = "60left-60right diagonal crossing",
+ tpdouble=true,
+ tpsingle=true,
+ trackworker="60r45l",
+ },
+ --If 60l60r had a mirror image, it would be here, but it's symmetric.
+ -- 60l60r is also equivalent to 30l30r but rotated 90 degrees.
+ ["60r45l"]={
+ conns = {{c=5}, {c=13}, {c=2}, {c=10}},
+ desc = "60right-45left diagonal crossing",
+ tpdouble=true,
+ tpsingle=true,
+ trackworker="60r30r",
+ },
+ ["60r30r"]={
+ conns = {{c=5}, {c=13}, {c=7}, {c=15}},
+ desc = "60right-30right diagonal crossing",
+ tpdouble=true,
+ tpsingle=true,
+ trackworker="30r45l",
+ },
+ ["30r45l"]={
+ conns = {{c=7}, {c=15}, {c=2}, {c=10}},
+ desc = "30right-45left diagonal crossing",
+ tpdouble=true,
+ tpsingle=true,
+ trackworker="30l45r",
+ },
+
+ },
+ regtp=true,
+ tpdefault="30l45r",
+ rotation={""},
+ trackworker = {
+ ["30l45r"] = "60l30l",
+ ["60l30l"] = "60l45r",
+ ["60l45r"] = "60l60r",
+ ["60l60r"] = "60r45l",
+ ["60r45l"] = "60r30r",
+ ["60r30r"] = "30r45l",
+ ["30r45l"] = "30l45r",
+ }
+}
+
+advtrains.trackpresets = advtrains.ap
+
+--definition format: ([] optional)
+--[[{
+ nodename_prefix
+ texture_prefix
+ [shared_texture]
+ models_prefix
+ models_suffix (with dot)
+ [shared_model]
+ formats={
+ st,cr,swlst,swlcr,swrst,swrcr,vst1,vst2
+ (each a table with indices 0-3, for if to register a rail with this 'rotation' table entry. nil is assumed as 'all', set {} to not register at all)
+ }
+ common={} change something on common rail appearance
+}
+[18.12.17] Note on new connection system:
+In order to support real rail crossing nodes and finally make the trackplacer respect switches, I changed the connection system.
+There can be a variable number of connections available. These are specified as tuples {c=<connection>, y=<rely>}
+The table "at_conns" consists of {<conn1>, <conn2>...}
+the "at_rail_y" property holds the value that was previously called "railheight"
+Depending on the number of connections:
+2 conns: regular rail
+3 conns: switch:
+ - when train passes in at conn1, will move out of conn2
+ - when train passes in at conn2 or conn3, will move out of conn1
+4 conns: cross (or cross switch, depending on arrangement of conns):
+ - conn1 <> conn2
+ - conn3 <> conn4
+]]
+
+function advtrains.register_tracks(tracktype, def, preset)
+ advtrains.trackplacer.register_tracktype(def.nodename_prefix, preset.tpdefault)
+ if preset.regtp then
+ advtrains.trackplacer.register_track_placer(def.nodename_prefix, def.texture_prefix, def.description, def)
+ end
+ if preset.regsp then
+ advtrains.slope.register_placer(def, preset)
+ end
+ for suffix, var in pairs(preset.variant) do
+ for rotid, rotation in ipairs(preset.rotation) do
+ if not def.formats[suffix] or def.formats[suffix][rotid] then
+ local img_suffix = suffix..rotation
+ local ndef = advtrains.merge_tables({
+ description=def.description.."("..(var.desc or "any")..rotation..")",
+ drawtype = "mesh",
+ paramtype="light",
+ paramtype2="facedir",
+ walkable = false,
+ selection_box = {
+ type = "fixed",
+ fixed = {-1/2, -1/2, -1/2, 1/2, -1/2+1/16, 1/2},
+ },
+
+ mesh = def.shared_model or (def.models_prefix.."_"..img_suffix..def.models_suffix),
+ tiles = {def.shared_texture or (def.texture_prefix.."_"..img_suffix..".png"), def.second_texture},
+
+ groups = {
+ attached_node=1,
+ advtrains_track=1,
+ ["advtrains_track_"..tracktype]=1,
+ save_in_at_nodedb=1,
+ dig_immediate=2,
+ not_in_creative_inventory=1,
+ not_blocking_trains=1,
+ },
+
+ can_dig = advtrains.can_dig_or_modify_track,
+ after_dig_node=function(pos)
+ advtrains.ndb.update(pos)
+ end,
+ after_place_node=function(pos)
+ advtrains.ndb.update(pos)
+ end,
+ at_nnpref = def.nodename_prefix,
+ at_suffix = suffix,
+ at_rotation = rotation,
+ at_rail_y = var.rail_y
+ }, def.common or {})
+
+ if preset.regtp then
+ ndef.drop = def.nodename_prefix.."_placer"
+ end
+ if preset.regsp and var.slope then
+ ndef.drop = def.nodename_prefix.."_slopeplacer"
+ end
+
+ --connections
+ ndef.at_conns = advtrains.rotate_conn_by(var.conns, (rotid-1)*preset.regstep)
+
+ local ndef_avt_table
+
+ if var.switchalt and var.switchst then
+ local switchfunc=function(pos, node, newstate)
+ newstate = newstate or var.switchalt -- support for 3 (or more) state switches
+ -- this code is only called from the internal setstate function, which
+ -- ensures that it is safe to switch the turnout
+ if newstate~=var.switchst then
+ advtrains.ndb.swap_node(pos, {name=def.nodename_prefix.."_"..(var.switchprefix or "")..newstate..rotation, param2=node.param2})
+ advtrains.invalidate_all_paths(pos)
+ end
+ end
+ ndef.on_rightclick = function(pos, node, player)
+ if advtrains.check_turnout_signal_protection(pos, player:get_player_name()) then
+ advtrains.setstate(pos, newstate, node)
+ advtrains.log("Switch", player:get_player_name(), pos)
+ end
+ end
+ if var.switchmc then
+ ndef.mesecons = {effector = {
+ ["action_"..var.switchmc] = function(pos, node)
+ advtrains.setstate(pos, nil, node)
+ end,
+ rules=advtrains.meseconrules
+ }}
+ end
+ ndef_avt_table = {
+ getstate = var.switchst,
+ setstate = switchfunc,
+ }
+ end
+
+ local adef={}
+ if def.get_additional_definiton then
+ adef=def.get_additional_definiton(def, preset, suffix, rotation)
+ end
+ ndef = advtrains.merge_tables(ndef, adef)
+
+ -- insert getstate/setstate functions after merging the additional definitions
+ if ndef_avt_table then
+ ndef.advtrains = advtrains.merge_tables(ndef.advtrains or {}, ndef_avt_table)
+ end
+
+ minetest.register_node(":"..def.nodename_prefix.."_"..suffix..rotation, ndef)
+ --trackplacer
+ if preset.regtp then
+ local tpconns = {conn1=ndef.at_conns[1].c, conn2=ndef.at_conns[2].c}
+ if var.tpdouble then
+ advtrains.trackplacer.add_double_conn(def.nodename_prefix, suffix, rotation, tpconns)
+ end
+ if var.tpsingle then
+ advtrains.trackplacer.add_single_conn(def.nodename_prefix, suffix, rotation, tpconns)
+ end
+ end
+ advtrains.trackplacer.add_worked(def.nodename_prefix, suffix, rotation, var.trackworker)
+ end
+ end
+ end
+ advtrains.all_tracktypes[tracktype]=true
+end
+
+function advtrains.is_track_and_drives_on(nodename, drives_on_p)
+ local drives_on = drives_on_p
+ if not drives_on then drives_on = advtrains.all_tracktypes end
+ local hasentry = false
+ for _,_ in pairs(drives_on) do
+ hasentry=true
+ end
+ if not hasentry then drives_on = advtrains.all_tracktypes end
+
+ if not minetest.registered_nodes[nodename] then
+ return false
+ end
+ local nodedef=minetest.registered_nodes[nodename]
+ for k,v in pairs(drives_on) do
+ if nodedef.groups["advtrains_track_"..k] then
+ return true
+ end
+ end
+ return false
+end
+
+function advtrains.get_track_connections(name, param2)
+ local nodedef=minetest.registered_nodes[name]
+ if not nodedef then atprint(" get_track_connections couldn't find nodedef for nodename "..(name or "nil")) return nil end
+ local noderot=param2
+ if not param2 then noderot=0 end
+ if noderot > 3 then atprint(" get_track_connections: rail has invaild param2 of "..noderot) noderot=0 end
+
+ local tracktype
+ for k,_ in pairs(nodedef.groups) do
+ local tt=string.match(k, "^advtrains_track_(.+)$")
+ if tt then
+ tracktype=tt
+ end
+ end
+ return advtrains.rotate_conn_by(nodedef.at_conns, noderot*AT_CMAX/4), (nodedef.at_rail_y or 0), tracktype
+end
+
+-- Function called when a track is about to be dug or modified by the trackworker
+-- Returns either true (ok) or false,"translated string describing reason why it isn't allowed"
+function advtrains.can_dig_or_modify_track(pos)
+ if advtrains.get_train_at_pos(pos) then
+ return false, attrans("Position is occupied by a train.")
+ end
+ -- interlocking: tcb, signal IP a.s.o.
+ if advtrains.interlocking then
+ -- TCB?
+ if advtrains.interlocking.db.get_tcb(pos) then
+ return false, attrans("There's a Track Circuit Break here.")
+ end
+ -- signal ip?
+ if advtrains.interlocking.db.is_ip_at(pos) then
+ return false, attrans("There's a Signal Influence Point here.")
+ end
+ end
+ return true
+end
+
+-- slope placer. Defined in register_tracks.
+--crafted with rail and gravel
+local sl={}
+function sl.register_placer(def, preset)
+ minetest.register_craftitem(":"..def.nodename_prefix.."_slopeplacer",{
+ description = attrans("@1 Slope", def.description),
+ inventory_image = def.texture_prefix.."_slopeplacer.png",
+ wield_image = def.texture_prefix.."_slopeplacer.png",
+ groups={},
+ on_place = sl.create_slopeplacer_on_place(def, preset)
+ })
+end
+--(itemstack, placer, pointed_thing)
+function sl.create_slopeplacer_on_place(def, preset)
+ return function(istack, player, pt)
+ if not pt.type=="node" then
+ minetest.chat_send_player(player:get_player_name(), attrans("Can't place: not pointing at node"))
+ return istack
+ end
+ local pos=pt.above
+ if not pos then
+ minetest.chat_send_player(player:get_player_name(), attrans("Can't place: not pointing at node"))
+ return istack
+ end
+ local node=minetest.get_node(pos)
+ if not minetest.registered_nodes[node.name] or not minetest.registered_nodes[node.name].buildable_to then
+ minetest.chat_send_player(player:get_player_name(), attrans("Can't place: space occupied!"))
+ return istack
+ end
+ if not advtrains.check_track_protection(pos, player:get_player_name()) then
+ minetest.record_protection_violation(pos, player:get_player_name())
+ return istack
+ end
+ --determine player orientation (only horizontal component)
+ --get_look_horizontal may not be available
+ local yaw=player.get_look_horizontal and player:get_look_horizontal() or (player:get_look_yaw() - math.pi/2)
+
+ --rounding unit vectors is a nice way for selecting 1 of 8 directions since sin(30°) is 0.5.
+ dirvec={x=math.floor(math.sin(-yaw)+0.5), y=0, z=math.floor(math.cos(-yaw)+0.5)}
+ --translate to direction to look up inside the preset table
+ local param2, rot45=({
+ [-1]={
+ [-1]=2,
+ [0]=3,
+ [1]=3,
+ },
+ [0]={
+ [-1]=2,
+ [1]=0,
+ },
+ [1]={
+ [-1]=1,
+ [0]=1,
+ [1]=0,
+ },
+ })[dirvec.x][dirvec.z], dirvec.x~=0 and dirvec.z~=0
+ local lookup=preset.slopeplacer
+ if rot45 then lookup=preset.slopeplacer_45 end
+
+ --go unitvector forward and look how far the next node is
+ local step=1
+ while step<=lookup.max do
+ local node=minetest.get_node(vector.add(pos, dirvec))
+ --next node solid?
+ if not minetest.registered_nodes[node.name] or not minetest.registered_nodes[node.name].buildable_to or advtrains.is_protected(pos, player:get_player_name()) then
+ --do slopes of this distance exist?
+ if lookup[step] then
+ if minetest.settings:get_bool("creative_mode") or istack:get_count()>=step then
+ --start placing
+ local placenodes=lookup[step]
+ while step>0 do
+ minetest.set_node(pos, {name=def.nodename_prefix.."_"..placenodes[step], param2=param2})
+ if not minetest.settings:get_bool("creative_mode") then
+ istack:take_item()
+ end
+ step=step-1
+ pos=vector.subtract(pos, dirvec)
+ end
+ else
+ minetest.chat_send_player(player:get_player_name(), attrans("Can't place: Not enough slope items left (@1 required)", step))
+ end
+ else
+ minetest.chat_send_player(player:get_player_name(), attrans("Can't place: There's no slope of length @1",step))
+ end
+ return istack
+ end
+ step=step+1
+ pos=vector.add(pos, dirvec)
+ end
+ minetest.chat_send_player(player:get_player_name(), attrans("Can't place: no supporting node at upper end."))
+ return itemstack
+ end
+end
+
+advtrains.slope=sl
+
+--END code, BEGIN definition
+--definition format: ([] optional)
+--[[{
+ nodename_prefix
+ texture_prefix
+ [shared_texture]
+ models_prefix
+ models_suffix (with dot)
+ [shared_model]
+ formats={
+ st,cr,swlst,swlcr,swrst,swrcr,vst1,vst2
+ (each a table with indices 0-3, for if to register a rail with this 'rotation' table entry. nil is assumed as 'all', set {} to not register at all)
+ }
+ common={} change something on common rail appearance
+}]]
+
+
+
+
+
+
+
+
+