diff options
Diffstat (limited to 'advtrains_interlocking')
4 files changed, 0 insertions, 788 deletions
diff --git a/advtrains_interlocking/locale/advtrains_interlocking.de.tr b/advtrains_interlocking/locale/advtrains_interlocking.de.tr deleted file mode 100644 index 3b2bbd6..0000000 --- a/advtrains_interlocking/locale/advtrains_interlocking.de.tr +++ /dev/null @@ -1,197 +0,0 @@ -# textdomain: advtrains_interlocking -Prefix set, next signal name will be: @1=Präfix gesetzt, nächster Signalname: @1 -Prefix unset, signals are not auto-named for you!=Präfix gelöscht, automatische Signalbenennung deaktiviert! -Sets the current prefix for automatically naming interlocking components. Example: '/at_nameprefix TEST' - signals will be named TEST1, TEST2 and so on=Setze einen Präfix für die automatische Benennung von neu hinzugefügten Signalen. Beispiel: '/at_nameprefix TEST' - Signale werden mit TEST1, TEST2 usw. benannt -Created track section @1 from @2 TCBs=Gleisabschnitt @1 aus @2 TCBs erstellt -Track section inconsistent here, repairing...=Gleisabschnitt ist inkonsistent, repariere... -Track section partition found, repairing...=Gleisabschnitt partitioniert, repariere... -Can set up track sections, routes and signals=Darf Gleisabschnitte, Fahrstraßen und Signale bearbeiten -@1 Terminal @2=@1 Ziel @2 -@1 is held in @2 position when this route is set and freed =@1 wird durch die Fahrstraße in Position @2 festgelegt -@1 is no longer affected when this route is set.=@1 wird nicht mehr durch die Fahrstraße festgelegt -Added track section @1 to the route.=Gleisabschnitt @1 zur Fahrstraße hinzugefügt. -Advance to next route section=Nächsten Gleisabschnitt hinzufügen -Advance/Complete Route=Fahrstraße fortsetzen/beenden -Advancing over next section is=Fortsetzen über nächsten Gleisabschnitt hinaus -Auto lock turnouts=automatischer Weichenverschluss -Cancel if you are unsure!=Abbrechen, wenn Sie unsicher sind! -Cancel route programming=Fahrstraßenprogrammierung abbrechen -Cannot program route without a target=Kann keine Fahrstraße ohne Ziel programmieren -End of interlocking=Ende der Zugsicherung -Enter Route Name=Fahrstraßennamen eingeben -Finish programming route=Fahrstraße abschließen -Finish route HERE=Fahrstraße HIER abschließen -Finish route at end of NEXT section=Fahrstraße am Ende des NÄCHSTEN Abschnitts abschließen -Fixed in state @1 by route @2 (punch to unfix)=Festgelegt in Zustand @1 durch Fahrstraße @2 (Schlagen um freizugeben) -Fixed in state @1 by route @2 until segment #@3 is freed.=Festgelegt in Zustand @1 durch Fahrstraße @2, bis Segment @3 freigegeben wird. -Insufficient privileges to use this!=Unzureichende Privilegien, um dies zu benutzen! -Next section is diverging (>2 TCBs)=Nächster Abschnitt enthält eine Weiche (>2 TCBs) -Route discarded.=Fahrstraße verworfen. -Route ends at signal:=Fahrstraße endet bei Signal: -Route leads into=Fahrstraße führt in -Route programming mode active. Punch TCBs to add route segments, punch turnouts to lock them.=Fahrstraßenprogrammierung aktiv. Schlage Gleisabschnittsgrenzen (TCB) um Segmente hinzuzufügen, schlage Weichen um sie festzulegen. -Route section @1 removed.=Fahrstraßenabschnitt @1 entfernt. -Routes should in most cases end at signals.=Fahrstraßen sollten normalerweise an einem Signal enden. -Save Route=Fahrstraße speichern -Step back one section=Einen Abschnitt zurück -Successfully programmed route.=Fahrstraße erfolgreich programmiert. -The origin TCB has become unknown during programming. Try again.=Der Start-TCB ist unbekannt geworden. Versuche nochmal. -This TCB is not suitable as=Diese Gleisabschnittsgrenze ist -This TCB is unconfigured, you first need to assign it to a rail=Diese Gleisabschnittsgrenze ist noch nicht konfiguiert, sie muss erst zugewiesen werden -WARNING: Route does not end at a signal.=ACHTUNG: Fahrstraße endet nicht an einem Signal. -[Route programming] =[Fahrstraßenprogrammierung] -impossible at this place.=ist hier nicht möglich. -non-interlocked area=nicht-überwachtes Gebiet -route continuation.=nicht als Fortsetzung geeignet. -(More Options)=(Mehr Optionen) -<< Select a route part to edit options=<< Wähle einen Abschnitt, um Optionen zu bearbeiten -<Default Aspect>=<Standardbegriff> -ARS Rule List=ARS-Regelliste -Advanced Options:=Erweiterte Optionen: -Announce distant signal=Entferntes Hauptsignal ankündigen -Back to signal=Zurück zum Signal -Call-on (section may be occupied)=Abschnitt darf belegt sein -Clone Route=Duplizieren -Delete Route=Fahrstraße löschen -Error:=Fehler: -New From Route=Neu aus dieser FS -No Signal at this TCB=Kein Signal hier -Route name=Fahrstraßenname -Route overview=Fahrstraßenübersicht -Save ARS List=ARS-Liste speichern -Section Options:=Abschnittsoptionen: -Set=Setzen -Signal Aspect:=Signalbegriff: -TCB at @1 has different section than previous TCB=TCB bei @1 hat einen anderen Gleisabschnitt als der vorherige TCB -TCB at @1 is missing=TCB bei @1 fehlt -TCB at @1 is not assigned to previous track section=TCB bei @1 ist dem vorherigen Gleisabschnitt nicht zugewiesen -Track section after @1 missing=Gleisabschnitt nach @1 fehlt -Turnout/component missing at @1=Weiche oder Komponente bei @1 fehlt -Lock conflict at @1, Held locked by:=Sperrenkonflikt bei @1, bereits gesperrt durch: -No TCB found at @1. Please update or reconfigure route!=TCB bei @1 nicht gefunden. Bitte Fahrstraße korrigieren! -No track section adjacent to @1. Please reconfigure route!=Gleisabschnitt nach @1 nicht gefunden. Bitte Fahrstraße korrigieren! -Route @1 from signal @2=Fahrstraße @1 von Signal @2 -Route @1 from signal @2, segment #@3=Fahrstraße @1 von Signal @2, Segment @3 -Section '@1' already has route set from @2:=Abschnitt '@1' bereits durch Fahrstraße von @2 belegt: -Section '@1' is occupied!=Abschnitt '@1' ist durch einen Zug belegt! -Section '@1' not found!=Abschnitt '@1' nicht gefunden! -TCB at @1 has different section than previous TCB. Please update track section or reconfigure route!=TCB bei @1 hat anderen Abschnitt als vorhergehender TCB. Bitte Fahrstraße korrigieren! -Turnout/component missing at @1. Please update track section or reconfigure route!=Weiche/Komponente bei @1 nicht gefunden. Bitte Fahrstraße korrigieren! -<assign distant>=<entf. Hauptsignal festl.> -<none>=<kein> -Assigned distant signal to the main signal at @1=Vorsignal dem Hauptsignal bei @1 zugewiesen -Assigned signal to the TCB at @1=Signal der Gleisabschnittsgrenze bei @1 zugewiesen -Clear=Leeren -Configuring Signal: Influence point of another signal is already present!=Signal einstellen: Beeinflussungspunkt eines anderen Signals bereits vorhanden! -Configuring Signal: Node is too far away. Aborted.=Signal einstellen: Block ist zu weit entfernt. Abbruch. -Configuring Signal: Please look in train's driving direction and punch rail to set influence point.=Signal einstellen: In Fahrtrichtung schauen und Gleis schlagen, um Beeinflussungspunkt zu setzen. -Configuring Signal: Successfully set influence point=Signal einstellen: Beeinflussungspunkt erfolgreich gesetzt -Configuring Signal: This is not a normal two-connection rail! Aborted.=Signal einstellen: Dies ist kein geeignetes Gleis! Abbruch. -Dst: @1=Haupts.: @1 -Influence point is not set.=Beeinflussungspunkt ist nicht gesetzt. -Influence point is set at @1.=Beeinflussungspunkt ist gesetzt bei @1. -Modify=Bearbeiten -Set distant signal: Punch the main signal to assign!=Hauptsignal zuweisen: Bitte schlage das Hauptsignal! -Set influence point=Beeinflussungspunkt setzen -Apply=Anwenden -Route search: @1 found=Fahrstraßensuche: @1 gefunden -Search further=Weitersuchen -Smartroute: No track section directly ahead!=Fahrstraßensuche: Kein Gleisabschnitt voraus! -Smartroute: TCBS or routes don't exist here!=Fahrstraßensuche: Gleisabschnittsgrenze oder Fahrstraßen existieren hier nicht! - (invalid)=(ungültig) -@1 locks in state @2=@1 gesperrt in Position @2 -A route is requested from this signal:=Fahrstraße von diesem Signal: -Add locks=Sperre hinzu. -Assign a signal=Signal zuweisen -Automatic Working is active.=Automatischer Blockbetrieb aktiv. -Automatic routesetting=ARS (autom. Fahrstraßenauswahl) -Boundary TCBs:=Gleisabschnittsgrenzen: -Can't remove TCB: Both sides must have no signal assigned!=Kann Gleisabschnittsgrenze nicht entfernen: mindestens eine Seite hat noch ein Signal zugewiesen! -Can't remove track, a train is here!=Kann Gleisabschnittsgrenze nicht entfernen: hier ist noch ein Zug! -Cancel=Abbruch -Cancel Route=Fahrstraße auflösen -Cannot delete route which has ARS rules, please review and then delete through edit dialog!=Fahrstraße hat ARS-Regeln, bitte überprüfe diese und lösche die Fahrstraße über den Bearbeitungsdialog! -Clear locks=Sperren löschen -Configuring TCB: Already existed at this position, it is now linked to this TCB marker=Gleisabschnittsgrenze einstellen: Existierte hier bereits, der Marker ist nun verbunden -Configuring TCB: Cannot use static signals for routesetting. Aborted.=Gleisabschnittsgrenze einstellen: statische Signale können nicht für Fahrstraßen benutzt werden. Abbruch. -Configuring TCB: Internal error, TCBS doesn't exist. Aborted.=Gleisabschnittsgrenze einstellen: Interner Fehler, TCB existiert nicht. Abbruch. -Configuring TCB: Node is too far away. Aborted.=Gleisabschnittsgrenze einstellen: Block ist zu weit entfernt. Abbruch. -Configuring TCB: Not a compatible signal. Aborted.=Gleisabschnittsgrenze einstellen: Kein kompatibles Signal. Abbruch. -Configuring TCB: Please punch the rail you want to assign this TCB to.=Gleisabschnittsgrenze einstellen: Bitte das Gleis schlagen, wo die Grenze erstellt werden soll. -Configuring TCB: Please punch the signal to assign.=Gleisabschnittsgrenze einstellen: Bitte das zuzuweisende Signal schlagen. -Configuring TCB: Successfully assigned signal.=Gleisabschnittsgrenze einstellen: Signal erfolgreich zugewiesen. -Configuring TCB: Successfully configured TCB=Gleisabschnittsgrenze einstellen: Grenze erfolgreich erstellt -Configuring TCB: This is not a normal two-connection rail! Aborted.=Gleisabschnittsgrenze einstellen: Dies ist kein geeignetes Gleis! Abbruch. -Create Interlocked Track Section=Gleisabschnitt anlegen -Delete this route=Fahrstraße löschen -Disable Automatic Working=Auto. Blockbetrieb aus -Distant signal triggers ARS=Vorsignal kann ARS auslösen -Edit=Bearbeiten -Enable Automatic Working=Automatischer Blockbetrieb -Error: TS modified, abort!=Fehler: Abschnitt verändert, Abbruch! -Final TCBS unset (legacy-style buffer route)=Letzte Abschnittsgrenze fehlt (Prellbockroute aus älterer Version) -Fixed route locks (e.g. level crossings):=Feste Fahrstraßensperren (z.B. Bahnübergang): -Link @1=Verknüpfe @1 -Link: @1=Verknüpfung: @1 -Multiple routes are requested (first available is set):=Mehrere Fahrstraßen angefragt (erste verfügbare wird eingestellt): -NOTE: ARS is disabled.=ACHTUNG: ARS deaktiviert! -New (Manual)=Neu (Manuell) -No Link=Keine Verknüpfung -No routes are yet defined.=Bisher keine Fahrstraßen definiert. -No trains on this section.=Keine Züge auf diesem Abschnitt. -Please cancel route first!= -Punch components to add fixed locks. (punch anything else @= end)=Schlage auf Komponenten um diese zu sperren (schlage irgendetwas anderes @= Ende) -Remove Section=Gleisabschnitt löschen -Reset section state=Gleisabschnitt zurücksetzen -Reset track section=Gleisabschnitt zurücksetzen -Reset track section @1!=Streckenabschnitt @1 zurückgesetzt! -Route has been set.=Fahrstraße ist festgelegt. -Route is re-set when a train passed.=Fahrstraße wird nach Passieren eines Zuges nicht aufgelöst. -Route is set over this signal by:=Eine Fahrstraße ist über dieses Signal gestellt von: -Route is set: =Fahrstraße ist festgelegt: -Routes are not automatically set.=Fahrstraßen werden nicht automatisch gestellt. -Routes:=Fahrstraßen: -Section holds @1 route locks.=Abschnitt hält @1 Sperren. -Section name=Name des Streckenabschnitts -Set ARS default route=Setze als ARS-Standardroute -Set Route=Fahrstraße einstellen -Setting fixed locks finished!=Feste Fahrstraßensperren hinzugefügt! -Show=Anzeigen -Show track section=Gleisabschnitt anzeigen -Side @1=Seite @1 -Signal at @1=Signal bei @1 -Signal has been unassigned. Name and routes are kept for reuse.=Signal getrennt. Name und Fahrstraßen bleiben im TCB gespeichert. -Signal name=Signalname -Signal on B side already assigned!=Signal auf Seite B bereits zugewiesen! -Signalling=Fahrstraßen stellen -Smart Route=Fahrstraßensuche -TCB Link: Select linked TCB now!=Gleisabschnitte verknüpfen: Zu verknüpfende Gleisabschnittsgrenze jetzt auswählen! -TCB already existed at this position, now linked to this node=Gleisabschnittsgrenze existierte hier bereits, der Block ist nun verbunden -TCB assigned to @1=Gleisabschnittsgrenze an @1 zugewiesen -This TCB has been removed. Please dig marker.=Gleisabschnittsgrenze wurde gelöscht. Bitte Marker entfernen. -This is a pure distant signal@nNo route is currently set through.=Dies ist ein reines Vorsignal@nAktuell keine Fahrstraße eingestellt. -This is an always-halt signal (e.g. a buffer)@nNo routes can be set from here.=Dies ist ein Haltsignal (z.B. Prellbock)@nVon hier aus können keine Fahrstraßen eingestellt werden. -This will clear the list of trains@nand the routesetting status of this section.@nAre you sure?=Dies löscht die Liste der Züge im Abschnitt@nsowie den Fahrstraßenstatus.@nSind Sie sicher? -This will remove the track section and set all its end points to End Of Interlocking=Dies wird den Gleisabschnitt löschen -Track Circuit Break=Gleisabschnittsgrenze -Track Circuit Break Configuration=Einstellungen der Gleisabschnittsgrenze -Track Section Detail - @1=Gleisabschnitts-Details - @1 -Trains on this section:=Züge in diesem Abschnitt -Unassign@nSignal=Signalzuw.@ntrennen -Unconfigured Track Circuit Break, right-click to assign.=Nicht konfiguierte Gleisabschnittsgrenze (TCB). Rechtsklick zum Zuweisen. -Wait for this route to be cancelled in order to do anything here.=Erst nach Auflösung dieser Fahrstraße kann von hier gestellt werden. -Waiting for route to be set...=Warten, bis Fahrstraße verfügbar ist... -Yes=Ja -You cannot modify track sections when a route is set or a train is on the section.=Abschnitt kann nicht bearbeitet werden, wenn eine Fahrstraße gesetzt ist oder der Abschnitt belegt ist. -Emplace manual lock=Manuelle Sperre setzen -Interlocking tool@nPunch: Highlight track section@nPlace: check route locks/show track section info=Zugsicherungswerkzeug@nSchlagen: Gleisabschnitte hervorheben@nPlatzieren: Gleisabschnittsinformation/Fahrstraßensperren anzeigen -No route locks set=Keine Fahrstraßensperren gehalten -No track section at this location!=Kein Gleisabschnitt gefunden! -Node is not a track!=Block ist kein Gleis! -Route lock inspector=Fahrstraßensperren-Inspektor -Route locks currently put:=Gesetzte Fahrstraßensperren: -Point Speed Restriction Track=Geschwindigkeitskontrollgleis -Point speed restriction: @1=Geschwindigkeitskontrolle: @1 -Set point speed restriction:=Setze Kontrollgeschwindigkeit: -You are not allowed to configure this track without the @1 privilege.=Sie dürfen ohne das „@1“-Privileg dieses Gleis nicht konfigurieren. -You are not allowed to configure this track.=Sie dürfen dieses Gleis nicht konfigurieren.
\ No newline at end of file diff --git a/advtrains_interlocking/locale/advtrains_interlocking.fr.tr b/advtrains_interlocking/locale/advtrains_interlocking.fr.tr deleted file mode 100644 index d5dedef..0000000 --- a/advtrains_interlocking/locale/advtrains_interlocking.fr.tr +++ /dev/null @@ -1,197 +0,0 @@ -# textdomain: advtrains_interlocking -Prefix set, next signal name will be: @1= -Prefix unset, signals are not auto-named for you!= -Sets the current prefix for automatically naming interlocking components. Example: '/at_nameprefix TEST' - signals will be named TEST1, TEST2 and so on= -Created track section @1 from @2 TCBs= -Track section inconsistent here, repairing...= -Track section partition found, repairing...= -Can set up track sections, routes and signals= -@1 Terminal @2= -@1 is held in @2 position when this route is set and freed = -@1 is no longer affected when this route is set.= -Added track section @1 to the route.= -Advance to next route section= -Advance/Complete Route= -Advancing over next section is= -Auto lock turnouts= -Cancel if you are unsure!= -Cancel route programming= -Cannot program route without a target= -End of interlocking= -Enter Route Name= -Finish programming route= -Finish route HERE= -Finish route at end of NEXT section= -Fixed in state @1 by route @2 (punch to unfix)= -Fixed in state @1 by route @2 until segment #@3 is freed.= -Insufficient privileges to use this!=Privilèges insuffisants pour utiliser ceci ! -Next section is diverging (>2 TCBs)= -#Route discarded.=Changement d'état de l'itinéraire. -Route ends at signal:= -Route leads into= -Route programming mode active. Punch TCBs to add route segments, punch turnouts to lock them.= -Route section @1 removed.= -Routes should in most cases end at signals.= -Save Route= -Step back one section= -#Successfully programmed route.=Succès d'invalidation des routages des trains -The origin TCB has become unknown during programming. Try again.= -This TCB is not suitable as= -This TCB is unconfigured, you first need to assign it to a rail= -WARNING: Route does not end at a signal.= -[Route programming] = -impossible at this place.= -non-interlocked area= -route continuation.= -(More Options)= -<< Select a route part to edit options= -#<Default Aspect>=Siège par défaut -ARS Rule List= -Advanced Options:= -#Announce distant signal=Signal distant métro de Munich ( -Back to signal= -Call-on (section may be occupied)= -Clone Route= -Delete Route= -Error:= -New From Route= -No Signal at this TCB= -Route name= -Route overview= -Save ARS List= -Section Options:= -Set= -#Signal Aspect:=Signal -TCB at @1 has different section than previous TCB= -TCB at @1 is missing= -TCB at @1 is not assigned to previous track section= -Track section after @1 missing= -Turnout/component missing at @1= -Lock conflict at @1, Held locked by:= -No TCB found at @1. Please update or reconfigure route!= -No track section adjacent to @1. Please reconfigure route!= -Route @1 from signal @2= -Route @1 from signal @2, segment #@3= -Section '@1' already has route set from @2:= -Section '@1' is occupied!= -Section '@1' not found!= -TCB at @1 has different section than previous TCB. Please update track section or reconfigure route!= -Turnout/component missing at @1. Please update track section or reconfigure route!= -<assign distant>= -<none>= -Assigned distant signal to the main signal at @1= -Assigned signal to the TCB at @1= -Clear= -Configuring Signal: Influence point of another signal is already present!= -Configuring Signal: Node is too far away. Aborted.= -Configuring Signal: Please look in train's driving direction and punch rail to set influence point.= -Configuring Signal: Successfully set influence point= -Configuring Signal: This is not a normal two-connection rail! Aborted.= -Dst: @1= -Influence point is not set.= -Influence point is set at @1.= -Modify= -Set distant signal: Punch the main signal to assign!= -Set influence point= -Apply= -Route search: @1 found= -Search further= -Smartroute: No track section directly ahead!= -Smartroute: TCBS or routes don't exist here!= - (invalid)= -@1 locks in state @2= -A route is requested from this signal:= -Add locks= -Assign a signal= -Automatic Working is active.= -#Automatic routesetting=Routage à distance -Boundary TCBs:= -Can't remove TCB: Both sides must have no signal assigned!= -Can't remove track, a train is here!= -Cancel= -Cancel Route= -Cannot delete route which has ARS rules, please review and then delete through edit dialog!= -#Clear locks=Autorisation (procédez) -Configuring TCB: Already existed at this position, it is now linked to this TCB marker= -Configuring TCB: Cannot use static signals for routesetting. Aborted.= -Configuring TCB: Internal error, TCBS doesn't exist. Aborted.= -Configuring TCB: Node is too far away. Aborted.= -Configuring TCB: Not a compatible signal. Aborted.= -Configuring TCB: Please punch the rail you want to assign this TCB to.= -Configuring TCB: Please punch the signal to assign.= -Configuring TCB: Successfully assigned signal.= -Configuring TCB: Successfully configured TCB= -Configuring TCB: This is not a normal two-connection rail! Aborted.= -Create Interlocked Track Section= -Delete this route= -Disable Automatic Working= -Distant signal triggers ARS= -Edit= -Enable Automatic Working= -Error: TS modified, abort!= -Final TCBS unset (legacy-style buffer route)= -Fixed route locks (e.g. level crossings):= -Link @1= -Link: @1= -Multiple routes are requested (first available is set):= -NOTE: ARS is disabled.= -New (Manual)= -No Link= -No routes are yet defined.= -No trains on this section.= -Please cancel route first!= -Punch components to add fixed locks. (punch anything else @= end)= -#Remove Section=Routage à distance -Reset section state= -#Reset track section=Inversion du sens de marche -Reset track section @1!= -Route has been set.= -Route is re-set when a train passed.= -Route is set over this signal by:= -Route is set: = -Routes are not automatically set.= -Routes:= -Section holds @1 route locks.= -#Section name=Nom de Station -Set ARS default route= -Set Route= -Setting fixed locks finished!= -Show= -Show track section= -Side @1= -#Signal at @1=Signal -Signal has been unassigned. Name and routes are kept for reuse.= -#Signal name=Signal -Signal on B side already assigned!= -#Signalling=Signal -Smart Route= -TCB Link: Select linked TCB now!= -TCB already existed at this position, now linked to this node= -TCB assigned to @1= -This TCB has been removed. Please dig marker.= -This is a pure distant signal@nNo route is currently set through.= -This is an always-halt signal (e.g. a buffer)@nNo routes can be set from here.= -This will clear the list of trains@nand the routesetting status of this section.@nAre you sure?= -This will remove the track section and set all its end points to End Of Interlocking= -#Track Circuit Break=Il y a un "Track Circuit Break" ici. -#Track Circuit Break Configuration=Il y a un "Track Circuit Break" ici. -Track Section Detail - @1= -Trains on this section:= -#Unassign@nSignal=Sémaphore -Unconfigured Track Circuit Break, right-click to assign.= -Wait for this route to be cancelled in order to do anything here.= -Waiting for route to be set...= -Yes= -You cannot modify track sections when a route is set or a train is on the section.= -Emplace manual lock= -Interlocking tool@nPunch: Highlight track section@nPlace: check route locks/show track section info= -No route locks set= -No track section at this location!= -Node is not a track!= -Route lock inspector= -Route locks currently put:= -Point Speed Restriction Track=Voie de point de limitation de vitesse -Point speed restriction: @1=Point de limitation de vitesse : @1 -Set point speed restriction:=Placez un point de limitation de vitesse : -You are not allowed to configure this track without the @1 privilege.=Vous n'êtes pas autorisé à configurer cette voie sans le privilège @1. -You are not allowed to configure this track.=Vous n'êtes pas autorisé à configurer cette voie.
\ No newline at end of file diff --git a/advtrains_interlocking/locale/advtrains_interlocking.zh_CN.tr b/advtrains_interlocking/locale/advtrains_interlocking.zh_CN.tr deleted file mode 100644 index 84ce27e..0000000 --- a/advtrains_interlocking/locale/advtrains_interlocking.zh_CN.tr +++ /dev/null @@ -1,197 +0,0 @@ -# textdomain: advtrains_interlocking -Prefix set, next signal name will be: @1= -Prefix unset, signals are not auto-named for you!= -Sets the current prefix for automatically naming interlocking components. Example: '/at_nameprefix TEST' - signals will be named TEST1, TEST2 and so on= -Created track section @1 from @2 TCBs= -Track section inconsistent here, repairing...= -Track section partition found, repairing...= -Can set up track sections, routes and signals= -@1 Terminal @2= -@1 is held in @2 position when this route is set and freed = -@1 is no longer affected when this route is set.= -Added track section @1 to the route.= -Advance to next route section= -Advance/Complete Route= -Advancing over next section is= -Auto lock turnouts= -Cancel if you are unsure!= -Cancel route programming= -Cannot program route without a target= -End of interlocking= -Enter Route Name= -Finish programming route= -Finish route HERE= -Finish route at end of NEXT section= -Fixed in state @1 by route @2 (punch to unfix)= -Fixed in state @1 by route @2 until segment #@3 is freed.= -Insufficient privileges to use this!= -Next section is diverging (>2 TCBs)= -Route discarded.= -Route ends at signal:= -Route leads into= -Route programming mode active. Punch TCBs to add route segments, punch turnouts to lock them.= -Route section @1 removed.= -Routes should in most cases end at signals.= -Save Route= -Step back one section= -Successfully programmed route.= -The origin TCB has become unknown during programming. Try again.= -This TCB is not suitable as= -This TCB is unconfigured, you first need to assign it to a rail= -WARNING: Route does not end at a signal.= -[Route programming] = -impossible at this place.= -non-interlocked area= -route continuation.= -(More Options)= -<< Select a route part to edit options= -#<Default Aspect>=默认座位 -ARS Rule List= -Advanced Options:= -Announce distant signal= -Back to signal= -Call-on (section may be occupied)= -Clone Route= -Delete Route= -Error:= -New From Route= -No Signal at this TCB= -Route name= -Route overview= -Save ARS List= -Section Options:= -Set= -#Signal Aspect:=信号灯 -TCB at @1 has different section than previous TCB= -TCB at @1 is missing= -TCB at @1 is not assigned to previous track section= -Track section after @1 missing= -Turnout/component missing at @1= -Lock conflict at @1, Held locked by:= -No TCB found at @1. Please update or reconfigure route!= -No track section adjacent to @1. Please reconfigure route!= -Route @1 from signal @2= -Route @1 from signal @2, segment #@3= -Section '@1' already has route set from @2:= -Section '@1' is occupied!= -Section '@1' not found!= -TCB at @1 has different section than previous TCB. Please update track section or reconfigure route!= -Turnout/component missing at @1. Please update track section or reconfigure route!= -<assign distant>= -<none>= -Assigned distant signal to the main signal at @1= -Assigned signal to the TCB at @1= -Clear= -Configuring Signal: Influence point of another signal is already present!= -Configuring Signal: Node is too far away. Aborted.= -Configuring Signal: Please look in train's driving direction and punch rail to set influence point.= -Configuring Signal: Successfully set influence point= -Configuring Signal: This is not a normal two-connection rail! Aborted.= -Dst: @1= -Influence point is not set.= -Influence point is set at @1.= -Modify= -Set distant signal: Punch the main signal to assign!= -Set influence point= -Apply= -Route search: @1 found= -Search further= -Smartroute: No track section directly ahead!= -Smartroute: TCBS or routes don't exist here!= - (invalid)= -@1 locks in state @2= -A route is requested from this signal:= -Add locks= -Assign a signal= -Automatic Working is active.= -Automatic routesetting= -Boundary TCBs:= -Can't remove TCB: Both sides must have no signal assigned!= -Can't remove track, a train is here!= -Cancel= -Cancel Route= -Cannot delete route which has ARS rules, please review and then delete through edit dialog!= -Clear locks= -Configuring TCB: Already existed at this position, it is now linked to this TCB marker= -Configuring TCB: Cannot use static signals for routesetting. Aborted.= -Configuring TCB: Internal error, TCBS doesn't exist. Aborted.= -Configuring TCB: Node is too far away. Aborted.= -Configuring TCB: Not a compatible signal. Aborted.= -Configuring TCB: Please punch the rail you want to assign this TCB to.= -Configuring TCB: Please punch the signal to assign.= -Configuring TCB: Successfully assigned signal.= -Configuring TCB: Successfully configured TCB= -Configuring TCB: This is not a normal two-connection rail! Aborted.= -Create Interlocked Track Section= -Delete this route= -Disable Automatic Working= -Distant signal triggers ARS= -Edit= -Enable Automatic Working= -Error: TS modified, abort!= -Final TCBS unset (legacy-style buffer route)= -Fixed route locks (e.g. level crossings):= -Link @1= -Link: @1= -Multiple routes are requested (first available is set):= -NOTE: ARS is disabled.= -New (Manual)= -No Link= -No routes are yet defined.= -No trains on this section.= -Please cancel route first!= -Punch components to add fixed locks. (punch anything else @= end)= -Remove Section= -Reset section state= -#Reset track section=改变行车方向 -Reset track section @1!= -Route has been set.= -Route is re-set when a train passed.= -Route is set over this signal by:= -Route is set: = -Routes are not automatically set.= -Routes:= -Section holds @1 route locks.= -#Section name=车站名称 -Set ARS default route= -Set Route= -Setting fixed locks finished!= -Show= -Show track section= -Side @1= -#Signal at @1=信号灯 -Signal has been unassigned. Name and routes are kept for reuse.= -#Signal name=信号灯 -Signal on B side already assigned!= -#Signalling=信号灯 -Smart Route= -TCB Link: Select linked TCB now!= -TCB already existed at this position, now linked to this node= -TCB assigned to @1= -This TCB has been removed. Please dig marker.= -This is a pure distant signal@nNo route is currently set through.= -This is an always-halt signal (e.g. a buffer)@nNo routes can be set from here.= -This will clear the list of trains@nand the routesetting status of this section.@nAre you sure?= -This will remove the track section and set all its end points to End Of Interlocking= -Track Circuit Break= -Track Circuit Break Configuration= -Track Section Detail - @1= -Trains on this section:= -#Unassign@nSignal=臂板信号机 -Unconfigured Track Circuit Break, right-click to assign.= -Wait for this route to be cancelled in order to do anything here.= -Waiting for route to be set...= -Yes= -You cannot modify track sections when a route is set or a train is on the section.= -Emplace manual lock= -Interlocking tool@nPunch: Highlight track section@nPlace: check route locks/show track section info= -No route locks set= -No track section at this location!= -Node is not a track!= -Route lock inspector= -Route locks currently put:= -Point Speed Restriction Track= -Point speed restriction: @1= -Set point speed restriction:= -You are not allowed to configure this track without the @1 privilege.=您没有“@1”权限，不能调整这段轨道。 -You are not allowed to configure this track.=您不能调整这段轨道。
\ No newline at end of file diff --git a/advtrains_interlocking/locale/advtrains_interlocking.zh_TW.tr b/advtrains_interlocking/locale/advtrains_interlocking.zh_TW.tr deleted file mode 100644 index 6cc9ba6..0000000 --- a/advtrains_interlocking/locale/advtrains_interlocking.zh_TW.tr +++ /dev/null @@ -1,197 +0,0 @@ -# textdomain: advtrains_interlocking -Prefix set, next signal name will be: @1= -Prefix unset, signals are not auto-named for you!= -Sets the current prefix for automatically naming interlocking components. Example: '/at_nameprefix TEST' - signals will be named TEST1, TEST2 and so on= -Created track section @1 from @2 TCBs= -Track section inconsistent here, repairing...= -Track section partition found, repairing...= -Can set up track sections, routes and signals= -@1 Terminal @2= -@1 is held in @2 position when this route is set and freed = -@1 is no longer affected when this route is set.= -Added track section @1 to the route.= -Advance to next route section= -Advance/Complete Route= -Advancing over next section is= -Auto lock turnouts= -Cancel if you are unsure!= -Cancel route programming= -Cannot program route without a target= -End of interlocking= -Enter Route Name= -Finish programming route= -Finish route HERE= -Finish route at end of NEXT section= -Fixed in state @1 by route @2 (punch to unfix)= -Fixed in state @1 by route @2 until segment #@3 is freed.= -Insufficient privileges to use this!= -Next section is diverging (>2 TCBs)= -Route discarded.= -Route ends at signal:= -Route leads into= -Route programming mode active. Punch TCBs to add route segments, punch turnouts to lock them.= -Route section @1 removed.= -Routes should in most cases end at signals.= -Save Route= -Step back one section= -Successfully programmed route.= -The origin TCB has become unknown during programming. Try again.= -This TCB is not suitable as= -This TCB is unconfigured, you first need to assign it to a rail= -WARNING: Route does not end at a signal.= -[Route programming] = -impossible at this place.= -non-interlocked area= -route continuation.= -(More Options)= -<< Select a route part to edit options= -#<Default Aspect>=預設座位 -ARS Rule List= -Advanced Options:= -Announce distant signal= -Back to signal= -Call-on (section may be occupied)= -Clone Route= -Delete Route= -Error:= -New From Route= -No Signal at this TCB= -Route name= -Route overview= -Save ARS List= -Section Options:= -Set= -#Signal Aspect:=色燈號誌機 -TCB at @1 has different section than previous TCB= -TCB at @1 is missing= -TCB at @1 is not assigned to previous track section= -Track section after @1 missing= -Turnout/component missing at @1= -Lock conflict at @1, Held locked by:= -No TCB found at @1. Please update or reconfigure route!= -No track section adjacent to @1. Please reconfigure route!= -Route @1 from signal @2= -Route @1 from signal @2, segment #@3= -Section '@1' already has route set from @2:= -Section '@1' is occupied!= -Section '@1' not found!= -TCB at @1 has different section than previous TCB. Please update track section or reconfigure route!= -Turnout/component missing at @1. Please update track section or reconfigure route!= -<assign distant>= -<none>= -Assigned distant signal to the main signal at @1= -Assigned signal to the TCB at @1= -Clear= -Configuring Signal: Influence point of another signal is already present!= -Configuring Signal: Node is too far away. Aborted.= -Configuring Signal: Please look in train's driving direction and punch rail to set influence point.= -Configuring Signal: Successfully set influence point= -Configuring Signal: This is not a normal two-connection rail! Aborted.= -Dst: @1= -Influence point is not set.= -Influence point is set at @1.= -Modify= -Set distant signal: Punch the main signal to assign!= -Set influence point= -Apply= -Route search: @1 found= -Search further= -Smartroute: No track section directly ahead!= -Smartroute: TCBS or routes don't exist here!= - (invalid)= -@1 locks in state @2= -A route is requested from this signal:= -Add locks= -Assign a signal= -Automatic Working is active.= -Automatic routesetting= -Boundary TCBs:= -Can't remove TCB: Both sides must have no signal assigned!= -Can't remove track, a train is here!= -Cancel= -Cancel Route= -Cannot delete route which has ARS rules, please review and then delete through edit dialog!= -Clear locks= -Configuring TCB: Already existed at this position, it is now linked to this TCB marker= -Configuring TCB: Cannot use static signals for routesetting. Aborted.= -Configuring TCB: Internal error, TCBS doesn't exist. Aborted.= -Configuring TCB: Node is too far away. Aborted.= -Configuring TCB: Not a compatible signal. Aborted.= -Configuring TCB: Please punch the rail you want to assign this TCB to.= -Configuring TCB: Please punch the signal to assign.= -Configuring TCB: Successfully assigned signal.= -Configuring TCB: Successfully configured TCB= -Configuring TCB: This is not a normal two-connection rail! Aborted.= -Create Interlocked Track Section= -Delete this route= -Disable Automatic Working= -Distant signal triggers ARS= -Edit= -Enable Automatic Working= -Error: TS modified, abort!= -Final TCBS unset (legacy-style buffer route)= -Fixed route locks (e.g. level crossings):= -Link @1= -Link: @1= -Multiple routes are requested (first available is set):= -NOTE: ARS is disabled.= -New (Manual)= -No Link= -No routes are yet defined.= -No trains on this section.= -Please cancel route first!= -Punch components to add fixed locks. (punch anything else @= end)= -Remove Section= -Reset section state= -#Reset track section=改變行車方向 -Reset track section @1!= -Route has been set.= -Route is re-set when a train passed.= -Route is set over this signal by:= -Route is set: = -Routes are not automatically set.= -Routes:= -Section holds @1 route locks.= -#Section name=車站名稱 -Set ARS default route= -Set Route= -Setting fixed locks finished!= -Show= -Show track section= -Side @1= -#Signal at @1=色燈號誌機 -Signal has been unassigned. Name and routes are kept for reuse.= -#Signal name=色燈號誌機 -Signal on B side already assigned!= -#Signalling=色燈號誌機 -Smart Route= -TCB Link: Select linked TCB now!= -TCB already existed at this position, now linked to this node= -TCB assigned to @1= -This TCB has been removed. Please dig marker.= -This is a pure distant signal@nNo route is currently set through.= -This is an always-halt signal (e.g. a buffer)@nNo routes can be set from here.= -This will clear the list of trains@nand the routesetting status of this section.@nAre you sure?= -This will remove the track section and set all its end points to End Of Interlocking= -Track Circuit Break= -Track Circuit Break Configuration= -Track Section Detail - @1= -Trains on this section:= -#Unassign@nSignal=臂木式號誌機 -Unconfigured Track Circuit Break, right-click to assign.= -Wait for this route to be cancelled in order to do anything here.= -Waiting for route to be set...= -Yes= -You cannot modify track sections when a route is set or a train is on the section.= -Emplace manual lock= -Interlocking tool@nPunch: Highlight track section@nPlace: check route locks/show track section info= -No route locks set= -No track section at this location!= -Node is not a track!= -Route lock inspector= -Route locks currently put:= -Point Speed Restriction Track= -Point speed restriction: @1= -Set point speed restriction:= -You are not allowed to configure this track without the @1 privilege.=您沒有「@1」許可權，不能調整這段軌道。 -You are not allowed to configure this track.=您不能調整這段軌道。
\ No newline at end of file |